LSPBT670 SIEMENS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • P-LCC-4 package
  • color of package: white
  • complete color spectrum
  • three separate light sources (dies) blue (480 nm), pure green (557 nm), red (630 nm)
  • excellent color mixture due to small distances between the dies (0.5 mm) and a common reflector of∅ 2.4 mm
  • suitable for matrix-displays with high packing density and high resolution (pixel graphic), respectively
  • for backlighting, optical coupling into light pipes and lenses
  • Colorimeter
  • medical analysis
  • high signal ratio possible by color change
  • suitable for all SMT assembly and soldering methods
  • available taped on reel (8 mm tape)
  • load dump resistant acc. to DIN 40839 Due to the fast technological development of blue chips, these data are preliminary. Brightness values are minimum values andVF are maximum values. Please contact your sales office before design-ins. VPL06837

trittsfläche Color of Light Emitting Area Durchlaß- strom Forward current IF mA Strahl- stärke Radiant intensity Ie µW/sr Strahl- strom Total flux Φ e µW Licht- stärke Luminous intensity Iv mcd Best.nr. Ordering Code LSPB T670 super-red / pure green/ blue colorless clear 5.5 (≥ 2.5) 4.0 (≥ 2.0) 4.0 (≥ 2.0) 16.5 0.7 2.5 0.6 Q62703- Q2896 Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit LS LP LB Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Tj + 100 ˚C Durchlaßstrom1) Forward current IF 30 30 30 mA Durchlaßstrom2) Forward current IF 7.5 15 30 mA Sperrspannung Reverse voltage VR 5V Verlustleistung1) Power dissipation Ptot 100 100 130 mW Wärmewiderstand Thermal resistance Sperrschicht / Umgebung Junction / air Montage auf PC-Board (Padgröße≥ 16 mm mounted on PC board (pad size≥ 16 mm 2) Rth JA Rth JA 480 630 370 450 450 530 K/W K/W 1) Die angegebenen Grenzwerte gelten für einen Chip, wenn die anderen Chips nicht betrieben werden. 2) Die angegebenen Grenzwerte gelten, wenn alle Chips in Betrieb sind. 1) The stated maximum ratings refer to one die with the other dies turned off. 2) The stated maximum ratings refer to all dies turned on.

Kennwerte (TA = 25 ˚C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Ein- heit UnitLS LP LB Wellenlänge des emittierten Lichtes (typ.) Wavelength at peak emission (typ.) IF = 10 mA λpeak 635 557 467 nm Dominantwellenlänge (typ.) Dominant wavelength (typ.) IF = 10 mA λdom 628 560 480 nm Spektrale Bandbreite bei 50 %Irel max (typ.) Spectral bandwidth at 50 %Irel max (typ.) IF = 10 mA Δλ 45 22 75 nm Visueller Wirkungsgrad Visual efficiency IF = 2 mA (typ.) IF = 10 mA (typ.) IF = 30 mA (typ.) ηv ηv ηv 130 625 165 lm/W lm/W lm/W Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 %IV 2ϕ 120 120 120 Grad deg. Durchlaßspannung Forward voltage IF = 10 mA (typ.) (max.) IF = 10 mA (typ.) (max.) IF = 20 mA (typ.) (max.) VF VF VF VF VF VF 2.0 2.6 2.0 2.6 3.1 4.5 V V V V V V Sperrstrom (typ.) Reverse current (max.) VR = 5 V IR IR 0.01 0.01 0.01 µA µA Kapazität (typ.) Capacitance VR = 0 V,f = 1 MHz C 0 12 15 50 pF Schaltzeiten: Switching times: IV from 10 % to 90 % (typ.) IV from 90 % to 10 % (typ.) IF = 100 mA,tp = 10µs,RL = 50Ω tr tf 300 150 450 200 800 800 ns ns

Additive Farbmischung durch unabhängige Ansteuerung von jedem Chip. Die Farbkoordinaten des Mischlichtes können innerhalb des mit a) gekennzeichneten Bereichs des Farbdreiecks erwartet werden. Der Unbuntpunkt (x = 0.33; y = 0.33) ist mit “+” gekennzeichnet. Beim Betrieb der LEDs mit folgenden Strömen: super-rot 2 mA pure green 10 mA blau 30 mA können die Farbkoordinaten des abgestrahlten Lichtes im mit b) gekennzeichneten Bereich Additive mixture of color stimuli by independent driving of each chip. The color coordinates of the mixed light can be expected within the area of the color triangle marked a). The achromatic point (x = 0.33; y = 0.33) is marked “+”. With LED operating currents of: super-red 2 mA pure green 10 mA blue 30 mA the color coordinates of the emitted light can be expected in the area of the color triangle

Relative spektrale EmissionIrel =f (λ),TA = 25 ˚C,IF = 10 mA Relative spectral emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve Abstrahlcharakteristik Irel =f (ϕ) Radiation characteristic

Durchlaßstrom IF =f (VF) Forward current TA = 25 ˚C Relative LichtstärkeIV/IV(10 mA) =f (IF) Relative luminous intensity TA = 25 ˚C Durchlaßstrom IF =f (VF) Forward current TA = 25 ˚C Relative LichtstärkeIV /IV(20 mA) =f (IF) Relative luminous intensity TA = 25 ˚C

Zulässige ImpulsbelastbarkeitIF =f (tp) Permissible pulse handling capability Duty cycle D = parameter, TA = 25 ˚C Maximal zulässiger Durchlaßstrom Max. permissible forward currentIF =f (TA) Only one system biased Zulässige ImpulsbelastbarkeitIF =f (tp) Permissible pulse handlingcapability Duty cycle D = parameter,TA = 25 ˚C Maximal zulässiger Durchlaßstrom Max. permissible forward currentIF =f (TA) All systems biased

Wellenlänge der Strahlungλpeak = f (TA) Wavelength at peak emission IF = 10 mA Durchlaßspannung VF =f (TA) Forward voltage IF = 10 mA Dominantwellenlänge λdom = f (TA) Dominant wavelength IF = 10 mA Relative LichtstärkeIV /IV(25 ˚C ) =f (TA) Relative luminous intensity IF = 10 mA

Maßzeichnung (Maße in mm, wenn nicht anders angegeben) Package Outlines (Dimensions in mm, unless otherwise specified) GPL06900