LSHD-5503 LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LSHD-5503 PAGE: 1 of 5 BNS-OD-C131/A4

FEATURES

＊0.56 inch (14.22 mm ) DIGIT HEIGHT ＊EXCELLENT SEGMENT UNIFORMITY ＊LOW POWER REQUIREMENT ＊HIGH BRIGHTNESS AND HIGH CONTRAST ＊WIDE VIEWING ANGLE ＊SOLID STATE RELIABILITY ＊BINNED FOR LUMINOUS INTENSITY

DESCRIPTION

The LSHD-5503 is a 0.56 inch (14.22 mm) digit height single-digit display. This device uses AS-AlInGaP RED LED chips (AlInGaP epi on GaAs substrate). The display has light gray face and white segments. DEVICE PART NO. DESCRIPTION AlInGaP RED LSHD-5503 Common Cathode Rt. Hand Decimal

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LSHD-5503 PAGE: 2 of 5 BNS-OD-C131/A4 PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are ± 0.25mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LSHD-5503 PAGE: 3 of 5 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION

1 Anode E

2 Anode D

3 Common Cathode

4 Anode C

5 Anode DP

6 Anode B

7 Anode A

8 Common Cathode

9 Anode F

10 Anode G

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LSHD-5503 PAGE: 4 of 5 BNS-OD-C131/A4 ABSOLUTE MAXIMUM RATING AT Ta = 25 oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 70 mW Peak Forward Current Per Segment ( Frequency 1Khz, 15% duty cycle) 90 mA Continuous Forward Current Per Segment 25 mA Forward Current Derating from 25 0C 0.28 mA/ 0C Operating Temperature Range -35 0C to +1050C Storage Temperature Range -35 0C to +1050C Soldering Conditions : 1/16 inch below seating plane for 5 seconds at 260 0C ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25 oC PARAMETER SYMBOL MIN TYP MAX UNIT TEST CONDITION

320 Average Luminous Intensity Per Segment IV

17000 µcd IF = 1mA IF = 10mA Peak Emission Wavelength λp 632 nm I F = 20mA Spectral Line Half-Width Δλ 20 nm I F = 20mA Dominant Wavelength λd 624 nm I F = 20mA Forward Voltage Per Segment V F 2.1 2.6 V I F = 20mA Reverse Current Per Segment I R 100 µA V R = 5V Luminous Intensity Matching Ratio I V -m 2 : 1 I F = 1mA Note: 1.Luminous Intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation.

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LSHD-5503 PAGE: 5 of 5 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25 oC Ambient Temperature Unless Otherwise Noted)