LPA100T WILCOXON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS LPA100T Low-power, low-voltage accelerometer Accessories supplied: SF6 mounting stud; calibration data (level 2) Key features

  • 300 µW power consumption
  • BOV settling time of <10 ms
  • Certified version available for use in hazardous areas (LPA100T-D2)
  • Internal temperature sensor
  • Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 50 mV/g Acceleration range 25 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 3 - 5,000 Hz 1 - 9,000 Hz 0.3 - 15,000 Hz Resonance frequency 30 kHz Transverse sensitivity, max 5% of axial Sensitivity variation with temp: –25°C +120°C –10% +10% Temperature sensor: Temperature range Voltage range Temperature signal sensitivity Voltage at 0°C –40°C to +120°C +2.52 to +0.77 V –10.9 mV/°C +2.1 V Power requirement: Voltage source Current (no cable) 3.0 - 5.5 VDC 100 µA, max Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 660 µg 60 µg/√Hz 16 µg/√Hz 5 µg/√Hz Output impedance, max 1,000 Ω Bias output voltage, settling time, 25°C Including temp effects <10 ms

1.5 VDC ± 5%

Grounding case isolated, internally shielded Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g, max 150 µg/gauss Sealing hermetic Base strain sensitivity, max 0.0002 g/μstrain Sensing element design PZT, shear Weight 90 grams Case material 316L stainless steel Mounting 1/4-28 UNF tapped hole Mating connector M12 style, socket Recommended cabling J12 / J9T4A Connections Function Connector pin power 1 common 2 accel signal 3 temp signal 4 shield* shell 99187 Rev.B.1 09/18 1/4-28 MOUNTING HOLE 0.88 [22.2] KEY 1.96 [49.7] 0.75 [19.1] 0.97 [24.6] 0.86 [21.8] M12 4 PIN CONNECTOR 1/4-28 MOUNTING HOLE 0.88 [22.2] KEY 1.96 [49.7] 0.75 [19.1] 0.97 [24.6] 0.86 [21.8] M12 4 PIN CONNECTORM12 4 PIN CONNECTOR *For installations requiring CE conformance, cable shield must be tied to sensor case.