LP379PBL1-C0G-03

LP379PBL1-C0G-03 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT118.000 Cree® P4 LED Model # LP379PBL-C0G-03 Data Sheet 120-degree, 7.6 x 7.6 LED lamp in blue color with water-transparent lens and stopper

Applications

Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current IF 30 mA Peak Forward Current Note IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 132 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 30 mA V 3.6 4.4 Reverse Current IR VR = 5 V μA 100 Dominant Wavelength λD IF = 30 mA nm 462 470 475 Luminous Flux ΦV IF = 30 mA mlm 400 800 50% Power Angle 2θ½ IF = 30 mA deg 120

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT8.000 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LP379PBL-C0G-03 (IF = 30 mA) Lamps are sorted to luminous flux (ΦV ), VF and dominant wavelength (λD) bins shown. Orders for LP379PBL1-60G-03 may be filled with any or all bins contained as below. All luminous flux (ΦV ), VF and dominant wavelength (λD) values shown and specified are at IF = 30 mA. X3 X4 X5 E or above D C Rank C D Luminous Flux 400-800 mlm 600-1200 mlm Rank V7 V8 V9 V10 V11 V12 V13 V14 Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. No tolerance in the measurement of luminous flux. Tolerance of measurement of dominant wavelength is ±1 nm. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu- ment. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 460 nm 465 nm 470 nm 475 nm Dominant Wavelength (λD) Luminous Flux (ΦV)

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT8.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 4/4 Format #: COTCO-D-074 REV.4 Document No. SPE/ LP379PBL1-C0G-03 Rev. No. 02 GGrraapphhss -90 -60 -30 300 60 60% 60% 20% 20% 40% 40% 100% 100% 80% 80% -40 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=28nm Domi WL= 470nm 400 FIG.4 RELATIVE LUMINOUS FLUX VS. 75%1.5 FIG.3 RELATIVE LUMINOUS FLUX VS. 80.0 1.0 0.0 FORWARD CURRENT 0.5 If(mA) 300 25% 50% FIG.1 FORWARD CURRENT VS. 0.0 2.5 2.0 FORWARD VOLTAGE. 3.0 3.4 3.8 4.2 100.0 80.0 40.0 60.0 20.0 If (mA) Vf(V) 5.04.6 100% Vr(V) -50 WL(nm) WL(nm) 700500 600 -50.0 Ir(uA) 0-20 -30-10 -20.0 -40.0 -30.0 -10.0 0.0 WAVELENGTH. FIG.6 FAR FIELD PATTERN 50% Power Angle : 120 Ie(%) FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C) 0 20 40 60 IF(mA) 12080 100 Ta( C) Items Signatures Date Revision History Prepared by LiuZM 2005-07-07 Rev. No Date Change Description Checked by Aldosin 2005-07-07 02 2005-07-07 Release. Approved by David 2005-07-07 FCN# FCN20050221 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT8.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/4 Format #: COTCO-D-074 REV.4 Document No. SPE/ LP379PBL1-C0G-03 Rev. No. 02 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Advertising Signs - Indicators - Message Board AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit Forward Current IF 30 mA Peak Forward Current* IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 132 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max.260°C for 3 sec Max. (3mm from the base of the epoxy bulb) *pulse width <=0.1msec duty <=1/10 TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 30mA --- 3.6 4.4 V Reverse Current IR VR = 5V --- --- 100 PA Dominant Wavelength OD IF = 30mA 462 470 475 nm Luminous Flux ĭV IF = 30mA 400 800 --- mlm 50% Power Angle 2T½ IF = 30mA --- 120 --- deg

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT8.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LP379PBL1-C0G-03-00001 P4 120 Blue 470nm, FULL RANK, Tube Pack * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tube pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N