LP377TYL1-A0G

LP377TYL1-A0G CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT134.000 Cree® P4 LED Model # LP377TYL-A0G Data Sheet 100-degree, 7.6 x 7.6 mm LED lamp in amber color with water-transparent lens and stopper

Applications

Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current Note 2 IF 70 mA Peak Forward Current Note 1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 220 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Notes: Pulse width ≤0.1 msec, duty ≤1/10. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 70 mA V 2.6 3.2 Reverse Current IR VR = 5 V μA 100 Dominant Wavelength λD IF = 70 mA nm 584 591 599 Luminous Flux ΦV IF = 70 mA mlm 2000 3200 50% Power Angle 2θ½ IF = 70 mA deg 100

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT34.000 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LP377TYL-A0G (IF = 70 mA) Lamps are sorted to luminous flux (ΦV), VF and dominant wavelength (λD) bins shown. Orders for LP377TYL1-A0G may be filled with any or all bins contained as below. All luminous flux (ΦV), VF and dominant wavelength (λD) values shown and specified are at IF = 70 mA. X2 X3 X4 X5 X6 L or above K J H G Rank G H J K Luminous Flux 2000-3000 mlm 2500-3600 mlm 3000-4200 mlm 3500-4800 mlm Forward Voltage (VF) Rank V4 V5 V6 V7 V8 Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. No tolerance of measurement of luminous flux. Tolerance of measurement of dominant wavelength is ±1 nm. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu- ment. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 587 nm 596 nm584 nm 590 nm 593 nm 599 nm Dominant Wavelength (λD)

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT34.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 4/4 COTCO-D-074 REV.1 Model No. LP377TYL1-A0G Doc. No. 10 23Sep04 GGrraapphhss 25% AMBIENT TEMPERATURE (Tjmax=120 C) FIG.5 MAXIMUM FORWARD DC CURRENT VS 0 20 40 12060 80 100 Ta( C) FIG.3 RELATIVE LUMINOUS FLUX VS. FORWARD CURRENT. 40.0 IF(mA) 100 20.00.0 0.0 0.5 100.0 If(mA) 60.0 80.0 -30 FIG.6 FAR FIELD PATTERN -90 -60 30 600 9 20% 20% 40% 40% WL(nm) 900 50% Power Angle : 100 WAVELENGTH. FIG.4 RELATIVE LUMINOUS FLUX VS. 400 500 600 700 800 80% 80% 60% 60% 100% 100% Ie(%) FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 2.4 2.0 1.0 1.5 2.5 2.0 0.0 2.2 Vf(V) 2.6 3.02.8 100.0 60.0 20.0 40.0 80.0 If (mA) FIG.2 REVERSE CURRENT VS. -50.0 Domi WL= 591nm I (RELATIVE LUMINOUS FLUX) 50% 75% 100% Half Power WL=20nm REVERSE VOLTAGE. Ir(uA) 0.0 -10.0 -30.0 -40.0 -20.0 Vr(V) Items Signatures Date Revision History Prepared by LiuZM 2004/09/23 DOC. No. CHANGE DESCRIPTION Checked by AldosinLi 2004/09/23 H 16Jul03 Cancel VF(min). add V8 & X6 Approved by David 2004/09/23 I 11Nov03 PD from 150 to 220; Change FIG.5 ECN# ECN-H20040261 10 23Sep04 Add ESD and Notes; Change FIG.1&3&5; Change ĭ Rank form.V & OD Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. Obsoletes Doc: I 11Nov03.

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT34.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/4 COTCO-D-074 REV.1 Model No. LP377TYL1-A0G Doc. No. 10 23Sep04 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Advertising Signs - Indicators - Automotive Lighting AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit Forward Current*2 IF 70 mA Peak Forward Current*1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 220 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max.260°C for 5 sec Max. (3mm from the base of the epoxy bulb) *1 pulse width <=0.1msec duty <=1/10 *2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions. TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 70mA --- 2.6 3.2 V Reverse Current IR VR = 5V --- --- 100 PA Dominant Wavelength OD IF = 70mA 584 591 599 nm Luminous Flux ĭV IF = 70mA 2000 3200 --- mlm 50% Power Angle 2T½ IF = 70mA --- 100 --- deg

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT34.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LP377TYL1-A0G-00001 P4 100 Amber 591nm, FULL RANK, Tube Pack LP377TYL1-A0G-00011 P4 100 Amber 591nm, H or above, Tube Pack * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tube pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N