LP1025_15 MARL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz106e LED Driver LP1025-xx Series Switch-Mode LED Driver Total Power 25 Watts Input Voltages 90~264 VAC or 100-277VAC Number of Outputs One Product Specifications ANZ#: Z106e, November 28, 2006 SPECIAL FEATURES ELECTRICAL SPECIFICATIONS

  • UL1310 / UL48 Class 2 compliant
  • Single output, constant current or constant voltage design
  • IP66 compliant
  • Designed for outdoor or indoor applications
  • Compact, lightweight in plastic case
  • PFC to reduce power consumption ENVIRONMENTAL Input range Frequency Power Factor Inrush current Input current Efficiency EMI filtering Maximum power Current Accuracy Load regulation Ripple/Noise Leakage Current Hold up time Protection 90 ~ 264 VAC, Full range or 100~277VAC 47 to 63 Hz > 0.92 at full load, 115VAC

20.0 Amps maximum at 230VAC, cold start, 25º C

0.4 Amps maximum at 115VAC

85% typical at maximum load 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B 25W ±1% (when applicable) ±3% N/A 300uA typ. Half cycle minimum at 120 VAC and 80% of rated load Over-voltage, Over current and Short circuit protection: Auto-recovery SAFETY UL / cUL UL1310 / UL48 Class 2 certified CE Certified Operating temperature: -30 to 60 º C (De-rating : 1% per º C from 60~70ºC ) Storage temperature: -40 to +85º C Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (MIL-217F) EMC : Compliant to 47CFR, Part 2, Part15 and Cispr PUB, 22 Class B Constant Voltage Mode Constant Current Mode Output Output Model Number V (DC) A (mA) Watts Model Number V (DC) A (mA) Watts LP1025-36 36, ±5% 700 25 LP1025-36C0700 18 ~ 36 700, ±5% 25 LP1025-24 24, ±5% 1040 25 LP1025-24C1040 12 ~ 24 1040 , ±5% 25 LP1025-12 12, ±5% 2080 25 LP1025-12C2080 8 ~ 12 2080, ±5% 25 MECHANICAL DRAWING