217-501-22-65 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE AC/DC DC INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA lp Topr Tstg 217-501-22-65 Red Water Clear 24 Vdc 75 11000 643 -40 ~ +95^ -40 ~ +100 Yes 217-521-22-65 Yellow Water Clear 24 Vdc 75 16000 591 -40 ~ +95^ -40 ~ +100 Yes 217-532-22-65 Green Water Clear 24 Vdc 75 23000 527 -40 ~ +95^ -40 ~ +100 Yes 217-930-22-65 Blue Water Clear 24 Vdc 75 7000 470 -40 ~ +95^ -40 ~ +100 Yes 217-997-22-65 Cool White Water Clear 24 Vdc 75 14000 *See below -40 ~ +95^ -40 ~ +100 Yes 217-501-75-65 Red Water Clear 110 Vac 22 11000 643 -40 ~ +95^ -40 ~ +100 Yes 217-521-75-65 Yellow Water Clear 110 Vac 22 16000 591 -40 ~ +95^ -40 ~ +100 Yes 217-532-75-65 Green Water Clear 110 Vac 22 23000 527 -40 ~ +95^ -40 ~ +100 Yes 217-930-75-65 Blue Water Clear 110 Vac 22 7000 470 -40 ~ +95^ -40 ~ +100 Yes 217-997-75-65 Cool White Water Clear 110 Vac 22 14000 *See below -40 ~ +95^ -40 ~ +100 Yes UNITS mA mcd nm 0C 0C l Direct replacement for E27 (European Standard) l BA22 (UK) and E26 (North American Standard) also available l 20 LED Cluster l Optional polycarbonate lens FILAMENT REPLACEMENT LEDs - Multi-LED Cluster Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
217 SERIES
PACK QUANTITY = 1 PIECE © MARL INTERNATIONAL LTD 2008 : DS 007/08 Issue 1 Page 1 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. - Refer to p age 3. 997 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
BS EN ISO 9001:2000 Approved Manufacturer © MARL INTERNATIONAL LTD 2008 : DS 007/08 Issue 1 Page 2 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Dimensions in mm (Typical) Not to scale TECHNICAL INFORMATION Lamp Base Style Series Metric Equivalent (mm) Maximum Power Dissipation (mW) E27 Filament Base 217 26 2500 DESIGN CONSIDERATIONS Single-Chip LEDs All devices feature water clear high intensity LEDs as st andard. Product Evaluation Filament Replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability . As this product range is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated lamp holders can be encountered. Due to subjectivity, evaluation of the LED Power Derating The forward voltage/current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore, care must be taken to operate the LED at the correct volt age/current values, depending upon the ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address these temperature ef fects. This recommendation is termed de-rating. It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However , because the values of these qualities vary with temperature, Marl should be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any product that is operated higher than the st ated voltage. Electro-st atic Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling product s. The range of possible situations is very diverse but voltage levels as high as several thousand volt s can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these product s. Although LEDs were never considered to be st atic sensitive devices, changes in manufacturing technology and materials used to produce higher intensity product s over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final p acking and despatch. We recommend all users of LED based product s follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. Ø22.1 Ø68.5
501, 521 532, 930 997 BS EN ISO 9001:2000 Approved Manufacturer © MARL INTERNATIONAL LTD 2007 : DS 007/08 Issue 1 Page 3 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. ALSO AVAILABLE PART NO. COLOUR VOL TAGE DC (Vdc) Vopr 217-501-22-65 Red 24Vdc 217-501-22-76 Red 24Vdc 217-501-23-65 Red 28Vdc 217-501-24-65 Red 48Vdc 217-501-25-65 Red 110Vdc 217-501-25-92 Red 110Vdc 217-501-25-93 Red 110Vdc 217-501-75-55 Red 110Vac 217-501-75-57 Red 110Vac 217-501-75-65 Red 110Vac 217-501-75-90 Red 110Vac 217-501-76-55 Red 230Vac 217-501-76-56 Red 230Vac 217-501-76-57 Red 230Vac 217-501-76-62 Red 230Vac 217-501-76-63 Red 230Vac 217-501-76-65 Red 230Vac 217-501-76-89 Red 230Vac 217-509-76-65 Yellow 230Vac 217-521-22-65 Yellow 24Vdc 217-521-75-57 Yellow 110Vac 217-521-76-63 Yellow 230Vac 217-521-76-65 Yellow 230Vac 217-521-77-65 Yellow 125Vac 217-532-22-65 Green 24Vdc 217-532-22-76 Green 24Vdc 217-532-25-65 Green 110Vdc 217-532-75-57 Green 110Vac UNITS PART NO. COLOUR VOL TAGE DC (Vdc) Vopr 217-532-75-65 Green 110Vac 217-532-76-55 Green 230Vac 217-532-76-57 Green 230Vac 217-532-76-65 Green 230Vac 217-551-76-95 Red 230Vac 217-551-76-96 Red 230Vac 217-751-76-55 Red 230Vac 217-904-76-95 Red 230Vac 217-904-76-96 Red 230Vac 217-904-86-50 Red 115Vac 217-904-86-51 Red 115Vac 217-905-76-95 Orange 230Vac 217-905-76-96 Orange 230Vac 217-907-76-95 Green 230Vac 217-907-76-96 Green 230Vac 217-925-76-95 Yellow 230Vac 217-925-76-96 Yellow 230Vac 217-930-22-65 Blue 24Vdc 217-930-23-65 Blue 28Vdc 217-930-76-55 Blue 230Vac 217-930-76-57 Blue 230Vac 217-930-76-65 Blue 230Vac 217-940-76-55 IR 230Vac 217-940-76-57 IR 230Vac 217-940-76-65 IR 230Vac 217-940-76-95 IR 230Vac 217-940-76-96 IR 230Vac 217-945-76-55 IR 230Vac UNITS PART NO. COLOUR VOL TAGE DC (Vdc) Vopr 217-945-76-65 IR 230Vac 217-945-76-83 IR 230Vac 217-971-76-65 Green 230Vac 217-993-75-65 Warm white 110Vac 217-993-76-62 Warm white 230Vac 217-993-76-63 Warm white 230Vac 217-993-76-65 Warm white 230Vac 217-997-22-65 White 24Vdc 217-997-23-65 White 28Vdc 217-997-25-65 White 110Vdc 217-997-25-87 White 110Vdc 217-997-75-63 White 110Vac 217-997-75-65 White 110Vac 217-997-75-68 White 110Vac 217-997-76-55 White 230Vac 217-997-76-57 White 230Vac 217-997-76-62 White 230Vac 217-997-76-63 White 230Vac 217-997-76-65 White 230Vac 217-997-76-68 White 230Vac 217-997-77-65 White 125Vac UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. Part numbers also available in the 217 Series: