LMXXX

LMXXX CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com 5x7mm Surface Mount LVDS Clock Oscillator Description: The Connor-Winfield LMxxx - Series are 5x7mm Surface Mount, LVDS, Fixed Frequency Crystal Controlled Oscillator (XO). The LMxxx - Series are designed for applications requiring tight frequency stability, wide temperature range, and low jitter. Operating at 2.5 or 3.3 Vdc supply voltage, the LMxxx - Series provides LVDS Differential Outputs with an enable / disable function. The design utilizes PLL multiplication to produce a high frequency output from a low frequency fundamental crystal. Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) 98 - 670 MHz 1 Total Frequency Tolerance (See Ordering Information or Model Matrix for full part number) Model LMx4x -20 - 20 ppm 2 Model LMx1x -25 - 25 ppm 2 Model LMx2x -50 - 50 ppm 2 Model LMx3x -100 - 100 ppm 2 Operating Temperature Range (See Ordering Information or Model Matrix for full part number) Model LM1xx 0 - 70 °C Model LM2xx -40 - 85 °C Model LM3xx 0 - 85 °C Model LM4xx -20 - 70 °C Supply Voltage (Vcc) (See Ordering Information or Model Matrix for full part number) Model LMxx2 2.375 2.5 2.625 Vdc Model LMxx3 3.135 3.3 3.465 Vdc Supply Current (Icc) - 70 75 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter - 0.6 1.0 ps RMS SSB Phase Noise (Fo = 155.52 MHz) @ 10 Hz offset - -40 - dBc/Hz @ 100 Hz offset - -75 - dBc/Hz @ 1 KHz offset - -95 - dBc/Hz @ 10 KHz offset - -110 - dBc/Hz @ 100 KHz offset - -115 - dBc/Hz Sub-Harmonics - -60 -50 dBc Start-Up Time - - 2 ms Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage -0.5 - Vcc + 0.5 Vdc Features: Model LMxxx - Series 5 x7mm Surface Mount Package 2.5 or 3.3 Vdc Operation LVDS Differential Outputs Frequency Stabilities Available: +/-20 ppm, +/-25 ppm, +/-50 ppm or +/-100 ppm Temperature Ranges Available: 0 to 70°C, -40 to 85°C, 0 to 85°C or -20 to 70°C Low Jitter <1ps RMS Tri-State Enable/Disable on Pad 1 Tape and Reel Packaging RoHS Compliant / Lead FreeBulletin DS030 Page 1 of 2 Revision 00 Date 05 Oct 2010 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Enable / Disable Input Characteristics Parameter Minimum Nominal Maximum Units Notes Enable Input Voltage - (High) -(Vih) 70%Vcc - - Vdc 3 Disable Input Voltage - (Low) - (Vil) - - 30%Vcc Vdc 3 LVDS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load - - 100 - Ohm Output Differential Voltage (Vod) 250 - 450 mV 4 Duty Cycle at 50% Level 45 50 55 % 5 Rise / Fall Time: 20% to 80% - 0.3 0.7 ns CW 1040 LM123155.52MHz Notes: 1. All output frequencies may not be available, please contact the factory with your output frequency requirements. 2. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. 3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad 1. 4. Vod measured with a 100 ohm resistor between the true output and the complementary output. 5. Duty cycle measured at 50% of output voltage swing. Package Characteristics Package Hermetically sealed ceramic package and metal cover Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering profile on page 2.

Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Bulletin Ds030 Page 2 of 2 Revision 00 Date 05 Oct 2010 Dimensional Tolerance: ±.02” (.508mm) ±.005” (.127mm) Suggested Pad Layout Output Waveform Tape and Reel Dimensions Pad Connections Solder Profile 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Enable / Disable Function 0.200 (5.08mm) 0.100 (2.54mm) 0.079 (2.0mm) 0.165 (4.2mm) 0.070 (1.78mm) Bypass Capacitor 0.01uF Ground Top V iew 456 321 Vod DutyCycle Vod 0V 0V 0V 80% 20% Vopp tr tf Q Q Differential Output W aveform peak-to-peak CW 1040 LM123

155.52 MHZ

.069 (1.75mm) 0.275 (7.0mm) 0.197 (5.0mm) 0.102 (2.6mm) 0.055 (1.4mm) Dimensional T olerance Vcc Power Supply Ground E/D 0.01uF 100 Ohm Q Q N/C Package Outline Type LVDS Clock Series 5x7 mm Temperature Range 1 = 0 to 70°C 2 = -40 to 85°C 3 = 0 to 85°C 4 = -20 to 70°C Frequency Tolerance 4 = ±20 ppm 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Amount of numbers after the decimal point. M = MHz LM 1 2 - 155.52M Supply Voltage 2 = 2.5 Vdc, 3 = 3.3 Vdc,

Ordering Information

Example Part Number: LM123-155.52M = LVDS Output, 0 to 70°C, +/-50ppm, 3.3Vdc, E/D Pad 1, Output Frequency 155.52 MHz Note: Not all temperature and frequency tolerance combinations are available. See Model Matrix below for available models 1: Enable / Disable

2 N/C

3: Ground 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Frequency Tolerance ±20 ppm Frequency Tolerance ±25 ppm Frequency Tolerance ±50 ppm Frequency Tolerance ±100 ppm Supply Voltage Temperature Range LM142 LM112 LM122 LM132 2.5 Vdc 0 to 70°C LM442 LM412 LM422 LM432 2.5 Vdc -20 to 70°C LM342 LM312 LM322 LM332 2.5 Vdc 0 to 85°C X X LM222 LM232 2.5 Vdc -40 to 85°C LM143 LM113 LM123 LM133 3.3 Vdc 0 to 70°C LM443 LM413 LM423 LM433 3.3 Vdc -20 to 70°C LM343 LM313 LM323 LM333 3.3 Vdc 0 to 85°C X X LM223 LM233 3.3 Vdc -40 to 85°C Model Matrix X = Models not available Test Circuit Pad 1 Input: Output State: Low: Disabled (High Impedance) High or Open: Enabled