LMP ISABELLENHUETTE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website Ausgabe / Issue LMP-2012-04-20 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de LMP Bauform / Size : 2010 ISA-PLAN® - SMD Präzisionswiderstände / SMD precision resistors MERKMALE / FEATURES

  • 2 W Dauerleistung

2 W permanent power

  • Dauerströme bis 45 A (1 mOhm) Continuous current load up to 45 A (1 mOhm)
  • Standard-Lötpadgeometrie Standard pad size
  • Sehr hohe Pulsbelastbarkeit High pulse power rating
  • Bauteilemontage: Reflow-, und IR-Löten. Kein Wellenlöten Mounting: Reflow- and IR-soldering. No wave soldering APPLIKATIONEN / APPLICATION
  • Messwiderstand für Leistungshybride Current sensor for power hybrid applications
  • Steuergeräte in der Automobiltechnik Control systems for the automotive market
  • Leistungsmodule Power modules
  • Schaltnetzteile Switch mode power supplies TECHNISCHE DATEN / TECHNICAL DATA Widerstandswerte Resistance values 10 mOhm - 500 mOhm Toleranz Tolerance 1 %, 5 % Temperaturkoeffizient Temperature coefficient < 50 ppm/K (20 °C bis/to 60 °C) Temperaturbereich Applicable temperature range -55 °C bis/to +170 °C Belastbarkeit Load capacity 2 W Innerer Wärmewiderstand (Rthi) Internal heat resistance (Rthi) < 30 K/W Isolationsspannung Dielectric withstanding voltage 100 V AC/DC Induktivität (R < 25 mOhm) Inductance (R < 25 mOhm) < 3 nH Stabilität (Nennlast) Abweichung TK= Kontaktstellentemperatur Stability (Nominal load) deviation TK= Terminal temperature < 1.0 % nach/after 2000 h (TK = 80 °C) < 2.0 % nach/after 2000 h (TK = 110 °C) Bauform / Size 2010 Abmessungen [mm] / Dimensions [mm] A ll data sheet.com

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website Ausgabe / Issue LMP-2012-04-20 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de LMP Bauform / Size : 2010 Lastminderungskurve / Power derating curve Verbesserte Stabilität / Improved stability < 1.0 % Stabilität / Stability < 2.0 % TK, Lastminderung und Langzeitstabilität / TCR, power derating and long term stability Temperaturabhängigkeit des elektrischen Widerstandes von MANGANIN ®-Widerständen / Temperature dependence of the electrical resistance of MANGANIN ®-resistors Typische Temperaturabhängigkeit eines LMP Widerstandes Typical temperature dependence of a LMP resistor Grenzkurve Limiting curve Temperatur [°C] / Temperature [°C] dR/R20 [%] Kontaktstellentemperatur [°C] / Terminal temperature [°C] A ll data sheet.com

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website Ausgabe / Issue LMP-2012-04-20 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de LMP Bauform / Size : 2010 GURTINFORMATIONEN / TAPE & REEL INFORMATION Norm / Specification DIN EN 60286-3 Gurtbreite / Tape width 12 mm Anzahl Bauteile / Parts per reel 10000 BESTELLBEZEICHNUNG / ORDERING CODE LMP-R010-1.0 Typ / Type Widerstandswert / Resistance value Toleranz / Tolerance LMP 10 mOhm 1.0 % Lötprofil Vorschlag / Recommended solder profile Reflow-, IR-Löten / Reflow-, IR-soldering Temperatur / Temperature [°C] 260 255 217 Zeit / Time [s] peak 40 90 Vorschlag für Leiterplatten Layout (Reflowlöten) / Proposal for pcb-layout (Reflow-soldering) Bei abweichender Lötpadgeometrie kann es zu gemessenen R-Wert Verschiebungen kommen. The measured resistance value may change with differing pcb-layout geometry. Gewährleistung Alle Angaben über Eignung, Verarbeitung und Anwendung unserer Produkte, technische Beratung und sonstige Angaben erfolgen nach bestem Wissen, befreien den Käufer jedoch nicht von eigenen Prüfungen und Versuchen. Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. Abmessungen [mm] / Dimensions [mm] RoHS 2002/95/EG konform seit Produktstart. Ausführliche Informationen erhalten Sie auf unserer Homepage: www.isabellenhuette.de RoHS 2002/95/EC compliance since product launch. For more information please visit our website: www.isabellenhuette.de A ll data sheet.com

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website Ausgabe / Issue LMP-2012-04-20 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de LMP Bauform / Size : 2010 Spezifikation / Specification Parameters Test Conditions Specification Typical data Maximum Temperature for full power operation 140 °C 140 °C 140 °C Working Temperature -55 to 170 °C -55 to 170 °C -55 to 170 °C Thermal Shock MIL-STD-202 method 107-B1 0.1 % 0.1 % Overload MIL-R-26E (5 times rated power, 5 sec) 0.2 % 0.2 % Solderability MIL-STD-202 method 208 > 95 % coverage > 95 % coverage Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage no damage Low Temperature Storage and Operation MIL-STD-26E 0.1 % 0.1 % Resistance to Soldering Heat MIL-STD-202 method 210 0.1 % 0.1 % Moisture Resistance MIL-STD-202 method 106 0.1 % 0.1 % Shock MIL-STD-202 method 213-A 0.2 % 0.2 % Vibration, High Frequency MIL-STD-202 method 204-B 0.2 % 0.2 % Life MIL-STD-26E 0.2 % 0.2 % Storage Life at Elevated Temperature MIL-STD-202 method 108-F 0.3 % 0.3 % Current Noise MIL-STD-202 method 308 0.01 % 0.01 % Voltage Coefficient (%/V) MIL-STD-202 method 309 linearity error less than 120dB linearity error less than 120dB Resistance Temperature Characteristic MIL-STD-202 method 304 (20-60°C) < 50 ppm/K < 50 ppm/K Thermal EMF 0 - 100 °C 2 µV/ °C max. 2 µV/ °C max. Frequency Characteristic inductivity < 3 nH < 3 nH Isabellenhütte Heusler GmbH & Co. KG Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30 Grenzkurve für maximale Pulsenergie bzw. Pulsleistung für Dauerbetrieb / Maximum pulse energy respectively pulse power for continuous operation 10000 1000 Die dargestellte Kurve gilt für den Widerstandswert R010. Für andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate Qualifikation erfolgen sollte. This curve is only valid for the resistance value R010. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve. A ll data sheet.com