LMD125 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
LED Mo DuLE DrivEr Data shEEt Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 www.CRee. Com/moDULe S CLM-DS13 Rev 2e Cree® LMD125 LED Module Drivers ProDuCt DEsCriPtion Cree LeD modules provide lighting designers and manufacturers with simple, easy-to-adopt LeD lighting solutions that reduce luminaire development time and speed time-to-market. Cree LMD125 LED module drivers are specifically designed to work with the Cree LMH2 850- and 1250-lumen light sources to jump-start the design process for recessed downlights, wall sconces or pendant lights in demanding end markets such as retail, museums, hospitality and restaurants.
fEaturEs
- Input voltages options: 100‑120 V,
230 V & 277 V
- TRIAC dimming support for 100‑120 V and 230 V options
- Optimized for Cree LMH2 850‑lm & 1250‑lm light sources
- LMD125 100‑120 V driver is PSE certified tabLE of ContEnts Characteristics - LMD125 100- to 120-v
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr orDEr CoDEs nominal input Voltage (VaC) frequency (Hz) typical output Current (ma) Dimming order Code 100-120 50/60 440 TRIAC LMD125-0018-C440-1010000 230 50/60 440 TRIAC LMD125-0018-C440-2010000 277 60 440 N/A LMD125‑0017‑C440‑3000000 CHaraCtEristiCs - LMD125 100- to 120 -V DriVEr Order Code: LMD125-0018-C440-1010000 Characteristics unit Minimum typical Maximum Input voltage range vAC 90 120 132 Input power W 18 Output current mA 440 Output voltage v 21 35 Driver efficacy (@ 55 °C) ‑ with LMH2 850‑lm light source % 80 Driver efficacy (@ 55 °C) ‑ with LMH2 1250‑lm light source % 81 Power factor ‑ with LMH2 850‑lm light source 0.97 Power factor ‑ with LMH2 1250‑lm light source 0.99 LeD driver case temperature °C 0 80CHaraCtEristiCs - LMD125 230 -V DriVEr Order Code: LMD125-0018-C440-2010000 Characteristics unit Minimum typical Maximum Input voltage range vAC 207 230 253 Input power W 18 Output current mA 440 Output voltage v 37 Driver efficacy (@ 55 °C) ‑ with LMH2 850‑lm light source % 80 Driver efficacy (@ 55 °C) ‑ with LMH2 1250‑lm light source % 81 Power factor ‑ with LMH2 850‑lm light source 0.90 Power factor ‑ with LMH2 1250‑lm light source 0.95 LeD driver case temperature °C 0 80
- 3‑D models (.STEP files) for the LMD125 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr CHaraCtEristiCs - LMD125 277 -V DriVEr Order Code: LMD125‑0017‑C440‑3000000 Characteristics unit Minimum typical Maximum Input voltage range vAC 249 277 305 Input power W 17 Output current mA 440 Output voltage v 21 35 Driver efficacy (@ 55 °C) ‑ with LMH2 850‑lm light source % 84 Driver efficacy (@ 55 °C) ‑ with LMH2 1250‑lm light source % 84 Power factor ‑ with LMH2 850‑lm light source 0.92 Power factor ‑ with LMH2 1250‑lm light source 0.98 LeD driver case temperature °C 0 80
- 3‑D models (.STEP files) for the LMD125 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page. DiMMing The LMH2 850‑ and 1250‑lm light sources combined with the LMD125 100‑ to 120‑V and 230‑V drivers work with standard leading‑ and trailing-edge dimming technologies to reduce light levels down to 5%. Driver input Voltage Dimming Lowest Light Level LMD125 100‑120 V TRIAC 5%
230 V TRIAC 5%
277 V None -
note ‑ Most residential dimmers are designed to control 600 to 1000 watts of power with standard lighting technologies, i.e., incandescent and halogen. Because the LMH2 LED module has a much higher efficacy (lumens per watt) than standard lighting fixtures, it requires much less power. There may be some cases that require the use of more than one LMH2 LED module or lighting fixture on a single dimmer to achieve the minimum dimmer load. This depends heavily upon the particular dimmer used. Partial lists of compatible dimmers are provided below. 100-VaC Dimmer Compatibility with WhiteLight Dimming Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Compatible with 3 LMH2s Cooper 6020 IND DI10P IND SI061-v IND SLC03P CFL/IND
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Compatible with 3 LMH2s Leviton Acenti ACe06 eLv Acenti AT106-1LW IND Decora 6631-LW IND Illumatech IPI06 IND Illumatech IP110 IND Mural MDe03-1 eLv vizia VP106 IND vizia VPE04 IND Lutron Ceana CN‑600P IND Ceana CNLV‑V‑600P MLv Centurion C-600 IND Decora HCM06-1DW IND/MLv Diva DV‑10P IND Diva DV‑600P IND Diva DVELV‑300P eLv Diva DVLV‑600P MLv Diva DvWCL-153DH CFL/LeD Faedra FAeLv-500 eLv Glyder GL-600M IND/HAL Lumea LG‑603PG IND Lyneo LX‑600PL IND Maestro MA-1000 IND Maestro MACL-153M CFL/LeD Maestro MAeLv-600 MLv Maestro MAW-600 IND Nova N-600 IND Nova NLV‑1503P MLv Nova T NT‑603P IND Nova T NTB-600 IND Nova T NTeLv-600 eLv RadioRA2 RRD-6NA IND/eLv/HAL/MLv Skylark S2-L INC/HAL Skylark S-600 IND Skylark SF‑10P FLR Skylark SELV‑300P eLv Skylark SLV‑600P MLv Sureslide 6673‑P CFL Toggler TG‑600PR‑W4 IND/MLv Pass and Seymour 90680-W IND LS600 IND Wattstopper MCD267‑W UNI CFL = Compact fluorescent dimmer IND = Incandescent dimmer eLv = electronic low-voltage dimmer LeD = Light-emitting diode dimmer
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr FLR = Fluorescent dimmer MLv = Magnetic low-voltage dimmer HAL = Halogen dimmer UNI = Universal dimmer The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer manufacturer’s instructions for installation and further product information. 120-VaC Dimmer Compatibility with WhiteLight Dimming Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Compatible with 3 LMH2s Cooper 6020 IND DI06-v IND DI10P IND Leviton Acenti ACe06 eLv Acenti AT106-1LW IND Illumatech IPI06 IND Illumatech IP110 IND Mural MDe03-1 eLv vizia VP106 IND vizia VPE04 IND Lutron Centurion C-600 IND Decora HCM06-1DW IND/MLv Diva DV‑10P IND Diva DV‑600P IND Diva DVELV‑300P eLv Diva DVF‑103P FLR Diva DVLV‑600P MLv Diva DvWCL-153DH CFL/LeD Faedra FAeLv-500 eLv Lyneo LX‑600PL IND Maestro MA-1000 IND Maestro MAeLv-600 MLv Nova NLV‑1503P MLv Nova T NT‑603P IND Nova T NTeLv-600 eLv RadioRA2 RRD-6NA IND/eLv/HAL/MLv RadioRA2 RRD-10ND IND/HAL/MLv Skylark S-600 IND Skylark SF‑10P FLR Skylark SELV‑300P eLv Skylark SLV‑600P MLv Sureslide 6673‑P CFL Toggler TG‑600PR‑W4 IND/MLv
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Compatible with 3 LMH2s Pass and Seymour 90680-W IND LS600 IND Wattstopper MCD267‑W UNI CFL = Compact fluorescent dimmer IND = Incandescent dimmer eLv = electronic low-voltage dimmer LeD = Light-emitting diode dimmer FLR = Fluorescent dimmer MLv = Magnetic low-voltage dimmer HAL = Halogen dimmer UNI = Universal dimmer The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer manufacturer’s instructions for installation and further product information. 120-VaC Dimmer Compatibility with sunset Dimming Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Compatible with 3 LMH2s Leviton Illumatech IPE04‑1LX eLv Lutron Diva DVELV‑300P eLv Faedra FAeLv-500 eLv Maestro MAeLv-600 MLv Nova T NTeLv-600 eLv Skylark SELV‑300P eLv eLv = electronic low-voltage dimmer MLv = Magnetic low-voltage dimmer The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer manufacturer’s instructions for installation and further product information. 230-VaC Dimmer Compatibility with WhiteLight Dimming Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s 100 Million Beautiful elec. None None Leading edge Berker Drehdimmer 2830 10 Leading edge Busch-Jaeger 2247 U 6512‑0‑0057 Leading edge
2250 U 6515‑0‑0704 Leading edge
6513 U-102 6513-0-0568 Trailing edge
6517 U‑101 6517‑0‑0016 Leading edge
Clipsal e30 System 32e450LM Leading edge e2000 E2031LPD600 Leading edge e30 System e32v500/2K Leading edge vivace KB31RD400 Leading edge
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr Manufacturer Model/series Part number type Compatible with 1 LMH2 Compatible with 2 LMH2s Feller Drehdimmer 40383.BSe Leading edge Drehdimmer 40600.RLC.BSe UNI Drehdimmer 40683.BSe Leading edge Flexalite None FD630D Leading edge Fung Yip electrical IeC 60669-2-1 PT15625‑2871 Leading edge Futina D1 None Leading edge Gira Gluhlampen 0302 00 / I01 Leading edge System 2000 0305 00 / I04 UNI Gluhlampen 0306 00 / I00 Leading edge Tronic 0307 00 / I02 Trailing edge Gluhlampen 1181 00 / I02 Leading edge Niedervolt 2262 00 / I00 Leading edge HPM 400T 050411/2/1A Trailing edge Jung Gluhlampen 211 GDe Leading edge Key-Top None AL-18 Leading edge None BP‑81 Leading edge KI None None Leading edge Legrand Arteor 5740 08 UNI Arteor 5743 08 UNI PRO 21 7756 37 UNI PRO 21 7759 03 Trailing edge Leviton Trimatron 012-6602-220 Leading edge Excella K52-BLe04-2LW Trailing edge Manhattan K02-BMe04-2LW Trailing edge Lutron Lyneo LLSM-502 Leading edge Mank None None Leading edge PDL 600 634M Leading edge Siemens Gluhlampen 5TC8 256 Leading edge μ‑Contact 5TGO752‑1NC1 Leading edge Super None BP‑600 Leading edge The presence of a dimmer in the above tables is not a guarantee or warranty of the compatibility of the LMH2 product family in any particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer manufacturer’s instructions for installation and further product information.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr MECH aniCaL DiMEnsions Physical Characteristics of the LMD125 Physical Characteristic LMD125 100- to 120-V and 277-V Driver LMD125 230-V Driver Weight (g) 114 146 Maximum height (mm) 29.5 33 Maximum length (mm) 81 123 Maximum width (mm) 56 79 LMD125 100- to 120-V and 277-V Drivers1 LMD125 230-V Driver 1 Dimensions for all the LMD125 diagrams are in mm and are for reference only. For exact dimensions and tolerances, refer to the 3‑D models (.STEP files) for the LMD125 drivers available by selecting the Documentation tab on the LMH2 product page. Tc LOCATION 40 MOUNTING SLOT TYP 2X M4 OR #8 WIRE ROUTING SLOT TYP 6X 28.612.2 23.5 31.2 80.4 23.5 29.5 152 3 STRIPPED 10 AL TW DIM TO FRA AN ON 26.5 41.5 Tc LOCATION LINE NEUTRAL M4 OR #8 MOUNTING SLOT TYP 2X 112.3 68.379 123
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr Wiring DiagraMs The unique design of the LMD125 LED module driver allows it to be mounted on an internal surface or to a junction box cover. For the 100‑ to 120‑V and 277‑V drivers, the leads can be routed through holes in a junction box cover and accessed in a standard junction box. When surface mounted, the LMD125 driver leads can be routed through the various wiring slots on each side. Electrical Connection For the LMD125 100‑ to 120‑V and 277‑V LED module drivers, LMH2 LED module operation is accomplished by connecting the AC mains to the two (2) lead wires (line and neutral) from the driver and connecting the driver output wires to the input leads on the Cree LMH2 light source, as indicated in the following wiring diagrams. For the LMD125 230‑V LED module driver, module operation is accomplished by connecting the AC mains to the appropriate terminal block pins. The LMD125 100‑ to 120‑V and LMD125 277‑V LED module driver lead wires are 152.4 mm long, 18 AWG with the ends stripped 10 mm. The LMD125 230-v LeD module drivers have poke-in terminals. LMD125 100- to 120-V and 277-V Drivers 100‑120/277 VAC
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr LMD125 230-V Driver Wiring strain relief LMD125 LED module drivers must not be suspended directly by the leads. Though the wiring from the LMD125 LED module driver is internally strain relieved, additional strain relief methods must be employed if the luminaire is to be suspended solely by the wiring, as in a pendant luminaire. tHErM aL DEsign Expected LMD125 Lifetime versus temperature at tc Point Expected operation Life (Hours) Tc (°C) @ 25 °C Room Ambient LMD125 100- to 120-V and 277-V Driver LMD125 230-V Driver 35,000 73 74 50,000 67 68
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr EMErgEnCy battEry oPEration The LMD125 LED module drivers are constant‑current supplies. Interrupting the driver current with a battery supply is an acceptable method of emergency or power outage operation. An acceptable installation should also include a switching mechanism that prevents the battery power from entering the driver through the DC output leads. Confirming backup power supply compatibility is the responsibility of the luminaire manufacturer or installer. Please refer to the backup power supply manufacturer’s instructions for installation and further product information. safE ty anD rEguL atory notEs The following tables show the safety and regulatory certifications for the LMD125 LED module drivers. LMD125 100 to 120 VaC triaC Dimming 50/60-Hz Driver LMD125 277 VaC non-dimming 60-Hz Driver standard file number standard file number Safety J61347‑1 (H20) CJP2012109004‑0645 J61347‑1 (H21) UL/cUL recognized (UL8750) E333437 UL/cUL recognized (UL8750) E333437 Class 2 power supply Class 2 power supply UL – Damp rated UL – Damp rated 5VA flame rating 5VA flame rating electromagnetic compatibility FCC 47 CFR Part 15, Subpart B, Class B and Industry Canada ICeS-003, Class B R11CA40667‑FCC FCC 47 CFR Part 15, Subpart B, Class B and Industry Canada ICeS- 003, Class A R11CA41176‑FCC Regulatory Ieee C.62.41-1991 Class A (surge) IEEE C.62.41‑1991 Class A (surge) NeMA 410 NeMA 410 environmental RoHS RoHS LMD125 230 VaC triaC dimming 50/60-Hz Driver standard file number Safety EN 61347‑1 RZCe2011-0452LvD EN 61347‑2‑13 CE SELV equivalent IP‑20 IeC 62384 6JW2012‑1878 CQC v2012CQC004014-125388 electromagnetic compatibility eN 55015 RZCe2011-0452eMC IeC 61000-3-2 IeC 61000-3-3 IEC 61547 environmental RoHs
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. LMD125 LED Mo DuLE DrivEr Safety Certification Together, the LMH2 light source combined with the LMD125 LED module driver is “suitable for damp locations; covered ceilings.” Final luminaire designs should go through safety certification as required, which is the responsibility of the luminaire manufacturer. PaCkaging LMD125 100‑ to 120‑V and 277‑V LED module drivers are each packaged in boxes of 10, which are then combined in cartons of 10 boxes, or 100 LMD125 100‑ to 120‑V or 277‑V drivers. LMD125 230‑V LED module drivers are packaged in boxes of 10, which are then combined in cartons of 12 boxes, or 120 LMD125 230‑V drivers. Box and carton sizes are as follows. Box of 10 LMD125 100‑ to 120‑V or 277‑V LED module drivers: 274 x 134 x 92 mm Carton of 10 LMD125 100‑ to 120‑V or 277‑V driver boxes: 563 x 480 x 167 mm Box of 10 LMD125 230‑V LED module drivers: 215 x 176 x 133 mm Carton of 12 LMD125 230‑V driver boxes: 556 x 456 x 302 mm