IP120 SEME-LAB | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Issue: 2 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Pin 1 – Ground Pin 2 – VOUT Case – VIN K Package – TO–3 Pin 1 – Ground Pin 2 – V OUT Case – VIN R Package – TO–66 Pin 1 – Ground Pin 2 – VIN Pin 3 – VOUT SMD Packages Ceramic Surface Mount
1.5 AMP
FEATURES
OUTPUT VOLTAGE OF -5V, -12V and -15V 0.7% / V LINE REGULATION AVAILABLE 0.5% / A LOAD REGULATION AVAILABLE THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSISTOR SOA PROTECTION 1.0% VOLTAGE TOLERANCE OPTION (‘A’ VERSIONS) V I DC Input Voltage PD Power Dissipation Tj Operating Junction Temperature Range Tstg Storage Temperature 35V Internally limited –55 to 150°C –65 to 150°C
DESCRIPTION
The IP120 / LM120 / IP7900 / LM7900 series of 3 terminal regulators is available with several fixed output voltage making them useful in a wide range of applications. The ‘A’ suffix devices provide 0.7% / V line regulation, 0.5% / A load regulation and ±1.0% output voltage tolerance at room temperature. Protection features include Safe Operating Area current limiting and thermal shutdown. Pin 1 – Ground Pin 2 – VIN Pin 3 – VOUT Case – VIN TO–257 TO–220 Isolated Case Option on 1 23 ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Issue: 2 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. IP/LM 7905A Series IP/LM 7905 Series IP/LM 120A Series IP/LM 120 Series -4.9 -5 -5.1 -4.8 -5.2 32 5 35 0 1.0 25 25 0 25 100 25 100 1.0 1.9 1.0 2 0.2 0.4 0.2 0.5 100 1.4 0.6 1.2 2.4 3.3 0.2 -7.3 -4.95 -5 -5.05 -4.85 -5.15 31 0 31 0 1.0 4 1.0 12 25 35 25 35 1.0 1.9 1.0 2 0.2 0.4 0.2 0.5 100 1.4 0.6 1.2 2.4 3.3 0.2 -7.3 V mV mV mA mA µV dB V mΩ A mV V Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Output Resistance Short Circuit Current Peak Output Current Average Temperature Coefficient of V O Input Voltage required to maintain line regulation I O = 500mA V IN = -10V IO = 5mA to IMAX VIN = -7.5V to -20V PD ≤ PMAX TJ = -55 to 150°C VIN = -7V to -25V IO = 0.5 IMAX VIN = -7.5V to -20V TJ = -55 to 150°C VIN = -8V to -12V IO ≤ IMAX TJ = -55 to 150°C IO = 5mA to 1.5A VIN = -10V I O = 5mA to IMAX TJ = -55 to 150°C IO ≤ 0.5 IMAX VIN = -10V T J = -55 to 150°C IO = 5mA to IMAX VIN = -10V T J = -55 to 150°C f = 10Hz to 100kHz V IN = -10V f = 120Hz I O ≤ IMAX VIN = -8V to -18V I O ≤ 0.5 IMAX TJ = -55 to 150°C IO = IMAX f = 1.0 kHz VIN = -35V VIN = -10V IO = 5mA IO ≤ IMAX 1) All characteristics are measured with a capacitor across the input of 2.2 µF and a capacitor across the output of 1.0µF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (t p ≤ 10ms, δ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated:PMAX = 10W for SMD , PMAX = 20W for all other package devices IMAX = 1.0A , TJ = 25°C VO ∆VO ∆VO IQ ∆IQ VN ∆VIN ∆VO RO Isc Ipk IP120 SERIES IP7900 SERIES LM120 SERIES LM7900 SERIES
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. 1) All characteristics are measured with a capacitor across the input of 2.2 µF and a capacitor across the output of 1.0µF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp ≤ 10ms, δ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: P MAX = 10W for SMD , P MAX = 20W for all other package devices, IMAX = 1.0A , TJ = 25°C VO Output Voltage VO Low Supply ∆VO Line Regulation ∆VO Load Regulation IQ Quiescent Current ∆IQ Quiescent Current Change VN Output Noise Voltage ∆VIN Ripple Rejection ∆VO Dropout Voltage RO Output Resistance Isc Short Circuit Current I pk Peak Output Current Average Temperature Coefficient of V O Input Voltage required to maintain line regulation IP/LM 7912A Series IP/LM 7912 Series IP/LM120A–12 Series IP/LM120–12 Series IO = 500mA V IN = -19V VIN = -14.8V to -27V PD ≤ PMAX IO = 5mA to IMAX TJ = -55 to 150°C IO = 5mA to IMAX PD ≤ PMAX VIN = -14.5V to -27V VIN = -14.5V to -30V IO = 0.5 IMAX VIN = -14.8V to -27V TJ = -55 to 150°C IO ≤ IMAX VIN = -16V to -22V T J = -55 to 150°C IO = 5mA to1.5A VIN = -19V IO = 250mA to 750mA VIN = -19V I O = 5mA to IMAX TJ = -55 to 150°C IO ≤ 0.5 IMAX VIN = -19V T J = -55 to 150°C IO = 5mA to IMAX VIN = -19V T J = -55 to 150°C VIN = -14.5V to -30V IO ≤ 0.5 IMAX VIN = -15V to -30V TJ = -55 to 150°C f = 10Hz to 100kHz V IN = -19V f = 120Hz I O ≤ IMAX VIN = -15V to -25V I O ≤ 0.5 IMAX TJ = -55 to 150°C IO = IMAX f = 1.0 kHz VIN = -35V VIN = -19V IO = 5mA IO ≤ IMAX -11.76 -12 -12.24 11.52 -12.48 -11.40 -12.60 4 120 4 200 1.0 25 26 0 12 80 46 0 8 120 0.2 0.4 1.0 2 0.2 0.4 0.2 0.5 0.1 0.4 0.1 1.0 75 960 56 72 56 72 1.1 2.3 0.6 1.2 2.4 3.3 0.5 4.8 -14.5 -11.88 -12 -12.12 -11.64 -12.36 -11.40 -12.36 41 8 41 8 1.0 4 12 32 41 9 86 0 0.2 0.4 1.0 2 0.2 0.4 0.2 0.5 0.1 0.4 0.1 0.5 75 960 58 72 58 72 1.1 2.3 0.6 1.2 2.4 3.3 0.5 4.8 -14.5 V V mV mV mA mA µV dB V mΩ A mV V IP120 SERIES IP7900 SERIES LM120 SERIES LM7900 SERIES
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. 1) All characteristics are measured with a capacitor across the input of 2.2 µF and a capacitor across the output of 1.0µF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp ≤ 10ms, δ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: P MAX = 10W for SMD , P MAX = 20W for all other package devices, IMAX = 1.0A , TJ = 25°C VO Output Voltage VO Low Supply ∆VO Line Regulation ∆VO Load Regulation IQ Quiescent Current ∆IQ Quiescent Current Change VN Output Noise Voltage ∆VIN Ripple Rejection ∆VO Dropout Voltage RO Output Resistance Isc Short Circuit Current I pk Peak Output Current Average Temperature Coefficient of V O Input Voltage required to maintain line regulation IP/LM 7915A Series IP/LM 7915 Series IP/LM120A–15 Series IP/LM120–15 Series IO = 500mA V IN = -23V VIN = -17.9V to -30V PD ≤ PMAX IO = 5mA to IMAX TJ = -55 to 150°C IO = 5mA to IMAX PD ≤ PMAX VIN = -17.5V to -30V VIN = -17.5V to -30V IO = 0.5 IMAX VIN = -17.9V to -30V TJ = -55 to 150°C IO ≤ IMAX VIN = -20V to -26V T J = -55 to 150°C IO = 5mA to 1.5A VIN = -23V IO = 250mA to 750mA VIN = -23V I O = 5mA to IMAX TJ = -55 to 150°C IO ≤ 0.5 IMAX VIN = -23V T J = -55 to 150°C IO = 5mA to IMAX VIN = -23V T J = -55 to 150°C VIN = -17.5V to -30V IO ≤ 0.5 IMAX VIN = -18.5V to -30V TJ = -55 to 150°C f = 10Hz to 100kHz V IN = -23V f = 120Hz I O ≤ IMAX VIN = -18.5V to I O ≤ 0.5 IMAX -28.5V T J = -55 to 150°C IO = IMAX f = 1.0 kHz VIN = -35V VIN = -23V IO = 5mA IO ≤ IMAX -14.7 -15 -15.3 -14.4 -15.6 -14.25 -15.75 4 150 4 250 27 5 5 150 12 80 47 5 9 150 1.0 1.9 1.0 2 0.2 0.4 0.2 0.5 0.1 0.4 0.1 1.0 90 1200 54 70 54 70 1.1 2.3 0.6 1.2 2.4 3.3 0.6 6 -17.5 -14.85 -15 -15.15 -14.55 -15.45 -14.25 -15.45 42 2 42 2 21 0 53 0 12 35 42 1 97 5 1.0 1.9 1.0 2 0.2 0.4 0.2 0.5 0.1 0.4 0.1 0.5 90 1200 56 70 56 70 1.1 2.3 0.6 1.2 2.4 3.3 0.6 6 -17.5 V V mV mV mA mA µV dB V mΩ A mV V IP120 SERIES IP7900 SERIES LM120 SERIES LM7900 SERIES
Issue: 2 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. GND VIN VOUT C1* 2.2 µF TANT. C2** 1 µF TANT. INPUT OUTPUT GND VIN VOUT 2.2 µF TANT. INPUT OUTPUT 1 µF TANT. R1GND VIN VOUT 2.2 µF TANT. INPUT OUTPUT IOUT 1µF TANT. Fixed Output Regulator * Required if the regulator is located far from the power supply. ** Required for stability. 25 µF electrolytic may be substituted. Current RegulatorAdjustable Output Regulator APPLICATIONS INFORMATION (R1+R2)VOUT ≈ VREG R1 VREGIOUT = + IQR1 Order Information Order Information Note: To order, add the package identifier to the part number. eg. IP7905AK LM120SMD-05 Part Number K–Pack (TO–3) R–Pack (TO–66) G/IG–Pack (TO–257) 220M–Pack (TO–220) SMD (SMD1) SMD–05 (SMD 0.5) IP7905 3 3 3 3 3 3 IP7912 3 3 3 3 3 3 IP7915 IP120-05 IP120-12 IP 120-15 3 3 3 3 3 33 3 3 3 3 3 3 3 3 3 3 3 3 3 3 LM7905 3 3 3 3 3 3 LM7912 3 3 3 3 3 3 LM7915 3 3 3 3 3 3 LM120-05 3 3 3 3 3 3 LM120-12 3 3 3 3 3 3 LM120-15 3 3 3 3 3 3 IP120 SERIES IP7900 SERIES LM120 SERIES LM7900 SERIES
Issue: 2 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. MECHANICAL INFORMATION IP120 SERIES IP7900 SERIES LM120 SERIES LM7900 SERIES (case) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 38.61 (1.52) 39.12 (1.54) 29.9 (1.177) 30.4 (1.197) 16.64 (0.655) 17.15 (0.675) 3.84 (0.151) 4.09 (0.161) 0.97 (0.060) 1.10 (0.043) 7.92 (0.312) 12.70 (0.50) 22.23 (0.875) max. 6.35 (0.25) 9.15 (0.36) 1.52 (0.06) 3.43 (0.135) K-Package (TO-3) 24.13 (0.95) 24.63 (0.97) 14.48 (0.570) 14.99 (0.590) 3.68 (0.145) rad. max. 3.61 (0.142) 4.08(0.161) rad. 0.71 (0.028) 0.86 (0.034) 1.27 (0.050) 1.91 (0.750) 9.14 (0.360) min. 4.83 (0.190) 5.33 (0.210) 6.35 (0.250) 8.64 (0.340) 11.94 (0.470) 12.70 (0.500) 1 2 16.5 (0.65) 1.5(0.53) 2.54 (0.1) BSC 3.70 Dia. Nom 1 2 3 0.8 (0.03) 2.70 (0.106) 1.0 (0.039) 4.6 (0.18) 10.6 (0.42) /G33 /G2E /G36 /G30 /G20 /G28 /G30 /G2E /G31 /G34 /G32 /G29 /G4D /G61 /G78 /G2E /G33 /G2E /G37 /G30 /G20 /G28 /G30 /G2E /G31 /G34 /G36 /G29 /G33 /G2E /G34 /G31 /G20 /G28 /G30 /G2E /G31 /G33 /G34 /G29 /G33 /G2E /G37 /G30 /G20 /G28 /G30 /G2E /G31 /G34 /G36 /G29 /G33 /G2E /G34 /G31 /G20 /G28 /G30 /G2E /G31 /G33 /G34 /G29 /G30 /G2E /G38 /G39 /G28 /G30 /G2E /G30 /G33 /G35 /G29 /G6D /G69 /G6E /G2E /G34 /G2E /G31 /G34 /G20 /G28 /G30 /G2E /G31 /G36 /G33 /G29 /G33 /G2E /G38 /G34 /G20 /G28 /G30 /G2E /G31 /G35 /G31 /G29 /G31 /G30 /G2E /G36 /G39 /G20 /G28 /G30 /G2E /G34 /G32 /G31 /G29 /G31 /G30 /G2E /G33 /G39 /G20 /G28 /G30 /G2E /G34 /G30 /G39 /G29 /G39 /G2E /G36 /G37 /G20 /G28 /G30 /G2E /G33 /G38 /G31 /G29 /G39 /G2E /G33 /G38 /G20 /G28 /G30 /G2E /G33 /G36 /G39 /G29 /G31 /G31 /G2E /G35 /G38 /G20 /G28 /G30 /G2E /G34 /G35 /G36 /G29 /G31 /G31 /G2E /G32 /G38 /G20 /G28 /G30 /G2E /G34 /G34 /G34 /G29 /G31 /G36 /G2E /G30 /G32 /G20 /G28 /G30 /G2E /G36 /G33 /G31 /G29 /G31 /G35 /G2E /G37 /G33 /G20 /G28 /G30 /G2E /G36 /G31 /G39 /G29 /G30 /G2E /G35 /G30 /G20 /G28 /G30 /G2E /G30 /G32 /G30 /G29 /G30 /G2E /G32 /G36 /G20 /G28 /G30 /G2E /G30 /G31 /G30 /G29 /G30 /G2E /G37 /G36 /G28 /G30 /G2E /G30 /G33 /G30 /G29 /G6D /G69 /G6E /G2E /G31 /G33 /G32 G/IG-Package (TO-257) SMD (SMD 1) 1 3 2.41 (0.095) (0.030) min. 0.127 (0.005) (0.296) 10.16 (0.400) 0.76 (0.030) min. 3.175 (0.125) Max. 0.50 (0.020) max. 7.54 0.76 2.41 (0.095) 0.127 (0.005) (0.286) 7.26
16 PLCS
0.50(0.020) 0.127 (0.005) 220M-Package (TO-220) R-Package (TO-66) SMD-05 (SMD 0.5)