LM6-EWN1-03-N3 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT166.000 Cree® SMD LED Model # LM6-EWN-03-N3 Data Sheet 120-degree, 3.3 x 3.5 mm, SMT LED in white color with water-transparent lens
Applications
Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current IF 3 x 30 mA Peak Forward Current Note 1 IFP 3 x 100 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 120 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient Note 2 RTHJA 3 x 350 °C/W Junction/Solder Point RTHJS 3 x 250 °C/W Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 3 x 20 mA V 3.4 4.0 Reverse Current IR VR = 5 V μA 100 Luminous Intensity IV IF = 3 x 20 mA mcd 2800 4000 Luminous Flux ФV IF = 3 x 20 mA mlm 11000 Chromaticity Coordinates x IF = 3 x 20 mA 0.31 y IF = 3 x 20 mA 0.32 50% Power Angle 2θ½ IF = 3 x 20 mA deg 120
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT66.000 Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LM6-EWN-03-N3 (IF = 3 x 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM6-EWN1-03-N3 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 20 mA. A1 A2 B1 B2 c Z2 or above Rank A1 A2 B1 Chromaticity Coordinates Rank B2 c Chromaticity Coordinates Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of the color coordinates is ±0.01. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface. Chromaticity Coordinates (x,y) Luminous Intensity (IV) 5600 mcd 4500 mcd 3550 mcd 2800 mcd
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT66.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram 4/5 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PWN1-11-N1 Rev. No. 03 CIE Chromaticity Diagram CIE 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 X Y 520 530 540 550 560 570 580 590 600 610 620 630 510 490 480 470 460 c
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT66.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 5/5 Format #: COTCO-D-074 REV.4 Document No. SPE/ LM6-EWN1-03-N3 Rev. No. 02 GGrraapphhss FIG.4 RELATIVE LUMINOUS INTENSITY VS. 700 50% 75% 25% 500 WAVELENGTH. 400 600 800 Half Power WL=150nm FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. 100% Vr(V) -50 -40 -30 -20 -40.0 -50.0 Ir(uA) 0.0 -20.0 -10.0 -30.0 -10 0 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Rth j-a=350C/W 0 60 40 80 Rth j-s=250 C/W IF(mA) 100 T ( C) 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 3.0 0.0 20.0 60.0 40.0 80.0 3.8 3.4 4.2 100.0 If (mA) Vf(V) 5.0 80.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. 0.0 FORWARD CURRENT 0.0 40.020.0 60.0 1.0 2.0 100.0 If(mA) FIG.6 FAR FIELD PATTERN 50% Power Angle : -60-90 -30 100% 80% 40% 20% 60% 30 60 90 Ie(%) 3.0 4.0 5.0 Items Signatures Date Revision History Prepared by WangFJ 2007-05-08 Rev.No Date Change Description Checked by XieJH 2007-05-08 02 2007-05-08 Change Dimension drawing Approved by DavidLiu 2007-05-08 FCN# FCN20070120 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT66.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/5 Format #: COTCO-D-074 REV.4 Document No. SPE/ LM6-EWN1-03-N3 Rev. No. 02 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Indicators - Illuminations - LCD Back Lights - Automobile’s Applications AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit Forward Current IF 3 x 30 mA Peak Forward Current* IFP 3 x 100 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 120 mW Operation Temperature Topr -40 ~ + 100 °C Storage Temperature Tstg -40 ~ + 100 °C Junction temperature Tj +110 °C Rth 3 x 350 °C /WJunction/ambient ** JA Rth 3 x 250 °C /WJunction/solder point JS *pulse width<=0.1msec duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit = 3 x 20mA --- 3.4 4.0 VForward Voltage V IF F Reverse Current I V = 5V --- --- 100 PAR R Luminous Intensity I IV F = 3 x 20mA mcd2800 4000 --- ӥ˩Luminous Flux IF = 3x20mA mlm--- 11000 --- Chromaticity Coordinates = 3 x 20mA --- 120 --- deg50% Power Angle 2 T½ IF
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT66.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM6-EWN1-03-N3-00001 SMD 120 White, FULL RANK, Tape & Reel LM6-EWN1-03-N3-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N