LM3-EWN1-01-N2

LM3-EWN1-01-N2 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT165.000 Cree® SMD LED Model # LM3-EWN-0-N2 Data Sheet 120-degree, 2.7 x 2.0 mm, SMT LED in white color with water-transparent lens

Applications

Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current IF 25 mA Peak Forward Current Note 1 IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient Note 2 RTHJA 450 °C/W Junction/Solder Point RTHJS 300 °C/W Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 20 mA V 3.4 4.0 Reverse Current IR VR = 5 V NjA 10 Luminous Flux ǼV IF = 20 mA mlm 4000 Luminous Intensity IV IF = 20 mA mcd 1120 1500 Chromaticity Coordinates x IF = 20 mA 0.30 y IF = 20 mA 0.29 50% Power Angle 2LJ½ IF = 20 mA deg 120

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT65.000 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LM3-EWN-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM3-EWN1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA. k1 k2 k3 k4 k5 k6 X2 or above Rank k1 k2 k3 Chromaticity Coordinates Rank k4 k5 k6 Chromaticity Coordinates Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of the color coordinates is ±0.01. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document. Please refer to the “Cree LED Lamp Reliability Test Parameters” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface. Chromaticity Coordinates (x,y) Luminous Intensity (IV) 2240 mcd 1800 mcd 1400 mcd 1120 mcd

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT65.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram 4/5 Format #: COTCO-D-074 REV.4 Document No. SPE/ LM3-EWN1-01-N1 Rev. No. 03 CIE Chromaticity Diagram CIE 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 X Y 520 530 540 560 570 580 590 600 610 620 630 510 490 480 470 460 ˾ˇ ˾ˈ

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT65.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 5/5 Format #: COTCO-D-074 REV.4 Document No. SPE/ LM3-EWN1-01-N1 Rev. No. 03 GGrraapphhss -90 -60 -30 900 30 60 0% 20% 40% 60% 80% 50% Power Angle : Ie(%) 0 100% 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. 100% WAVELENGTH. 25% 75% 50% 500400 600 800 REVERSE VOLTAGE. FIG.2 REVERSE CURRENT VS. Half Power WL=150nm Vr(V) -50 -40 -30 -20 -50.0 -40.0 Ir(uA) 0.0 -30.0 -10.0 -20.0 -10 0 FIG.6 FAR FIELD PATTERN 0.0 FORWARD CURRENT FIG.3 RELATIVE LUMINOUS INTENSITY VS. IF(mA) FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C 0.0 10060 8040 T ( C) Rth j-s=300 C/W Rth j-a=450 C/W If (mA) FORWARD VOLTAGE. FIG.1 FORWARD CURRENT VS. 0.0 2.0 1.0 3.0 4.0 5.0 3.0 80.0 40.0 20.0 60.0 100.0 If(mA) Vf(V) Items Signatures Date Revision History Prepared by Rev.No Date Change Description WangFJ 2007-05-08 Add ĭV (typ) 4000 mlm and important notes: 8) and Change Chromaticity Coordinates (X,Y) and CIE DiagramChecked by 02 2007-03-05XieJH 2007-05-08 Release. Change CIE from 1/4bin(a21-b24) to 1/2bin(k1-k6), typ(x)0.31 to 0.30,(y)0.32 to 0.29 Approved by 03 2007-04-10DavidLiu 2007-05-08 FCN# 04 2007-05-08FCN20070120 Change dimension drawing Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT65.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/5 Format #: COTCO-D-074 REV.4 Document No. SPE/ LM3-EWN1-01-N1 Rev. No. 03 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Indicators - Illuminations - LCD Back Lights - Automobile’s Applications AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit 25I mAForward Current F 100I mAPeak Forward Current* FP 5V VReverse Voltage R 100P mWPower Dissipation D -40 ~ + 100 °CTOperation Temperature opr -40 ~ + 100 T °CStorage Temperature stg Junction temperature Tj +110 °C Junction/ambient ** R 450 °C/Wth JA Junction/solder point R 300 °C/Wth JS 2*pulse width<=0.1msec duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage V I = 20mA --- 3.4 4.0 VF F Reverse Current I V = 5V --- --- 10 PAR R ӥ˩Luminous Flux IF = 20mA mlm--- 4000 --- Luminous Intensity I IV F = 20mA mcd1120 1500 --- Chromaticity Coordinates 50% Power Angle I = 20mA --- 120 --- deg2 T½ F

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT65.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM3-EWN1-01-N1-00001 SMD 120 White, FULL RANK, Tape & Reel LM3-EWN1-01-N1-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N