LM1-PBL1-11-N1

LM1-PBL1-11-N1 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT146.000 Cree® SMD LED Model # LM-PBL--N Data Sheet 120-degree, 3.2 x 2.7 mm, power SMD in blue color with water-transparent lens

Applications

Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current IF 30 mA Peak Forward Current Note 1 IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient Note 2 RTHJA 350 °C/W Junction/Solder Point RTHJS 200 °C/W Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 30 mA V 3.6 4.2 Reverse Current IR VR = 5 V μA 10 Luminous Intensity IV IF = 30 mA mcd 140 200 Dominant Wavelength λD IF = 30 mA nm 460 470 480 50% Power Angle 2θ½ IF = 30 mA deg 120

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT46.000 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LM-PBL--N (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-PBL1-11-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 30 mA. X3 X4 X5 X6 T2 or above Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of dominant wavelength is ±1 nm. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu- ment. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 480 nm460 nm 465 nm 470 nm 475 nm Dominant Wavelength (λD) Luminous Intensity (IV) 355 mcd 280 mcd 224 mcd 180 mcd 140 mcd

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT46.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 4/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PBL1-11-N1 Rev. No. 02 GGrraapphhss 0-10-20-30 0.0 -40 Vr(V) -50 Ir(uA) -50.0 -30.0 -40.0 -10.0 -20.0 5.0 Vf(V) 100% 75% 50% FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=28nm Domi WL= 470nm 100% 700500 600 WL(nm) WL(nm) Ie(%) 80% 60% 40% 20% 0%60300 90 400300 WAVELENGTH. If(mA) 100.0 -30-60-90100 T ( C) FIG.4 RELATIVE LUMINOUS INTENSITY VS. 50% Power Angle : FIG.6 FAR FIELD PATTERN. 25% If (mA) 100.0 4.23.4 3.8 80.0 40.0 60.0 20.0 0.0 3.0 2.5 2.0 1.5 1.0 FORWARD VOLTAGE. 60.020.0 40.0 Rth j-s=200 C/W 0.0 IF(mA) FORWARD CURRENT 0.0 Rth j-a=350 C/W 80 6040 20 0.5 FIG.1 FORWARD CURRENT VS. 4.6 TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.5 MAXIMUM FORWARD DC CURRENT VS FIG.3 RELATIVE LUMINOUS INTENSITY VS. 80.0 Items Signatures Date Revision History Prepared by Rev.No Date Change Description Meiliping 2005-07-27 Checked by 02 2005-07-27 Release. XieJH 2005-07-27 Approved by DavidLiu 2005-07-27 FCN# FCN20050260 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT46.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PBL1-11-N1 Rev. No. 02 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Indicators - Illuminations - LCD Back Lights - Automobile’s Applications AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit Forward Current IF 30 mA Peak Forward Current* IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ + 100 °C Storage Temperature Tstg -40 ~ + 100 °C Junction temperature Tj +110 °C Junction/ambient ** Rth JA 350 °C/W Junction/solder point Rth JS 200 °C/W *pulse width<=0.1msec duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 30mA --- 3.6 4.2 V Reverse Current IR VR = 5V --- --- 10 PA Luminous Intensity IV IF =30mA 140 200 --- mcd Dominant Wavelength OD IF =30mA 460 470 480 nm 50% Power Angle 2 T½ IF = 30mA --- 120 --- deg

Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT46.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM1-PBL1-11-N1-00001 SMD 120 Blue 470nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N