LM1-NRR1-01-N1 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT142.000 Cree® SMD LED Model # LM-NRR-0-N Data Sheet 120-degree, 3.2 x 2.8-mm, SMT LED in full color with water-transparent lens
Applications
Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 50 25 25 mA Peak Forward Current Note 2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 125 100 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on Note 3 RTHJA 450 400 450 °C/W Junction/ambient 3 chips on Note 3 RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 300 280 300 °C/W Junction/solder point 3 chips on RTHJS 450 430 480 °C/W Notes: Single-color light. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PC Board FR 4 (pad size >=16mm2) Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition Symbol Values Unit R G B Wavelength at peak emission IF = 20 mA λPEAK 620 520 465 nm Dominant Wavelength IF = 20 mA λDOM 610~620 520~540 460~480 nm Spectral bandwidth at 50% IREL max IF = 20 mA λ 24 38 28 nm Viewing Angle at 50% IV IF = 20 mA 2θ½ 120 120 120 °C Forward Voltage IF = 20 mA VF(avg) 2.0 3.4 3.4 V VF(max) 2.5 4.0 4.0 V Luminous Intensity IF = 20 mA IV(min) 112 180 45 mcd IV(avg) 180 250 70 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Standard Bins for LM-NRR-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-NRR1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. T or above S R U or above T S R or above Q P Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of dominant wavelength is ±1 nm. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu- ment. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 620 nm610 nm 540 nm520 nm 480 nm460 nm Dominant Wavelength (λD) Luminous Intensity (IV) Dominant Wavelength (λD) Luminous Intensity (IV) Dominant Wavelength (λD) Luminous Intensity (IV) 280 mcd 180 mcd 112 mcd 450 mcd 280 mcd 180 mcd 112 mcd 71 mcd 45 mcd
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 4/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-NRR1-01-N1 Rev. No. 02 GGrraapphhss
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 5/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-NRR1-01-N1 Rev. No. 02 GGrraapphhss -60-90 50% Power Angle : 0%906030-30 0 20% 100% 80% 40% 60% FAR FIELD PATTERN IF(mA) 200 RED GREEN IF(mA) GREEN RED BLUE BLUE 8040 60 0 20 T( C) 1008040 60 IF(mA) 200 BLUE BLUE GREEN RED 8060 40 IF(mA) GREEN T( C) 1008040 RED 100 T( C) 100 T( C)
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 6/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-NRR1-01-N1 Rev. No. 02 GGrraapphhss the color coordinates of the mixed light can be expected within the area of the color triangle marked a). the achromatic point (x=0.33,y=0.33) is marked“+” Items Signatures Date Revision History Prepared by Meiliping 2005-12-14 Rev.No Date Change Description Checked by XieJH 2005-12-14 02 2005-12-14 Change IV Rank of G from R, S, T to S,T. Approved by DavidLiu 2005-12-14 FCN# FCN20050422 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”. The achromatic point (x=0.33,y=0.33) is marked “+”.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-NRR1-01-N1 Rev. No. 02 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Indoor and outdoor displays - Backlighting - Coupling into light guides - RGB full color displays AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Absolute maximum RatingItems Symbol R G B Unit Forward Current*1 IF 50 25 25 mA Peak Forward Current*2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 125 100 100 mW Operation Temperature Topr -40~+100 °C Storage Temperature Tstg -40~+100 °C Junction Temperature Tj +110 +110 +110 °C Junction/ambient 1 chips on*3 Rth JA 450 400 450 °C/W Junction/ambient 3 chips on*3 Rth JA 650 580 680 °C/W Junction/solder point 1 chips on Rth JS 300 280 300 °C/W Junction/solder point 3 chips on Rth JS 450 430 480 °C/W *1 single color light *2 pulse width <=0.1msec duty <=1/10 *3 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Values Parameter Condition Symbol R G B Unit Wavelength at peak emission IF=20mA Opeak 620 520 465 nm Dominant wavelength IF=20mA Odom 610~620 520~540 460~480 nm Spectral bandwidth at 50% Irel max IF=20mA O 24 38 28 nm Viewing angle at 50% IV IF=20mA 2 T½ 120 120 120 Deg. VF(avg) 2.0 3.4 3.4 V Forward voltage IF=20mA VF(max) 2.5 4.0 4.0 V Iv(Min) 112 180 45 mcd Luminous Intensity IF=20mA Iv(Avg) 180 250 70 mcd Reverse current (max.) VR=5V IR 10 10 10 PA
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description Contact Cree Sales SMD 120 Full Color, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N