LINEAR-AXIS AEROTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 15
Technical content
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com1www.aerotech.com LaserTurn2 and LaserTurn5 Linear/Rotary Motion Platform The LaserTurnTM series of products are the first dedicated motion subsystems targeted directly at cylindrical laser processing applications. The integrated linear-rotary system combines automated material handling functionality and wet cutting operation with high performance direct-drive linear and rotary motion. The pneumatically actuated 3-jaw gripper has a clear aperture for product feedthrough and can be configured for O.D., I.D., or odd form gripping with various jaw geometries, while the ER collet supports tubing diameters from 0.5 mm to 30 mm. Integral Tooling Platform The LaserTurnTM series can be equipped with front and rear tooling platforms that include tapped holes on four surfaces for various fixture mounting. The tooling platform is bolted directly to the base of the linear stage providing a stiff, common inertial frame of reference. Custom fixtures such as bushing alignment, part collection, or automated material advance assemblies can easily be attached. Metric or English-based hardware and hole patterns are available as are custom configurations with application specific features. Automated Material Handling The LaserTurnTM is a complete motion and material handling subsystem. The system includes an automated, pneumatically activated 3-jaw gripper or ER collet for part holding. The 3-jaw gripper has a clear aperture for product feedthrough and can be configured for O.D., I.D., or odd High integration linear/rotary motion platform Pneumatically actuated 3-jaw gripper or ER collet Clear aperture for product feedthrough Optional front and rear tooling platforms Direct-drive linear and rotary motor technology Configure for wet or dry cutting High-speed rotary option for rotational speeds up to 2000 rpm form gripping with various jaw geometries. The ER collet chuck also has a clear aperture for product feedthrough and can support tubing diameters from 0.5 mm (0.020 inch) to 30 mm (1.18 inch). Direct-Drive Technology The LaserTurnTM series utilizes direct-drive noncontact motor and encoder technology for both the linear and rotary axes. Direct-drive motors exhibit significantly higher throughput and maintenance-free operation when compared to gear and screw-driven technology. Linear and rotary encoders coupled directly to the load have the highest level of system accuracy and repeatability over the operating lifetime of the stage. Scalable Product Solutions Three platforms – the LaserTurnTM1, LaserTurnTM2, and the LaserTurnTM5 – are available to provide support for different price and performance requirements. Each product features the automated material handling capabilities and modular tooling platforms. The LaserTurnTM 2 has a smaller overall footprint and reduced load carrying capability while providing similar accuracy and repeatability to the larger LaserTurnTM5. The LaserTurnTM5’s deeper cross section and larger bearings provide higher throughput and dynamic tracking accuracy for a given load when compared to the LaserTurnTM 2. Advanced Control Architecture The LaserTurnTM is available with a powerful, yet intuitive Aerotech’s advanced control system, with which a user can conveniently optimize the current, velocity, and position servo loops for maximum performance. Advanced
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com2 www.aerotech.com LaserTurn2/LaserTurn5 Standard and custom tooling platforms available at the front and rear for simple integration of application specific fixtures. Shown with optional 3 jaw gripper for large diameter or odd- form materials. trajectory generation capabilities such as multi-block look ahead minimize geometry errors in tight profiles by transparently regulating cutting speed. Aerotech’s Position Synchronized Laser Firing Output (PSO) functionality automatically adjusts the laser pulse frequency to match the current cutting speed to maintain optimal laser power coupling.
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com3www.aerotech.com LaserTurn2 SPECIFICATIONS Mechanical Specifications Linear Axis Rotary Axis Travel 200 mm 300 mm ±360 deg. continuous Accuracy With -E2 Encoder Option Calibration: ±1 µm Uncalibrated: ±5 µm ±73 µrad (±15 arc sec) With -E1 Encoder Option Calibrated: ±1 µm Uncalibrated: ±8 µm Calibrated: ±1 µm Uncalibrated: ±12 µm Bidirectional Repeatability ±0.5 µm ±15 µrad (±3 arc sec) Straightness ±4 µm ±6 µm N/A Flatness ±4 µm ±6 µm N/A Pitch 39 µrad (8 arc sec) 58 µrad (12 arc sec) N/A Yaw 39 µrad (8 arc sec) 58 µrad (12 arc sec) N/A Maximum Speed(1) 2 m/s 800 rpm 2000 rpm (-HS option) Tube Capacity N/A 10 mm (ER16, Dry Cut) 5.8 mm (ER16, Wet Cut) Maximum Force (Continuous) 106.7 N N/A Maximum Torque (Continuous) N/A 2.3 N·m (Dry Cut)
1.6 N·m (Wet Cut)
Load Capacity(2) Axial 3.0 kg Radial 2.0 kg Moment 3 N·m Moving Mass (Unloaded) 10 kg N/A Rotor Inertia (Unloaded) N/A 0.0006 kg·m2 Stage Mass with Tooling Platforms 26 kg 30 kg N/A Collet Type(3) N/A ER16 Collet Runout(4) N/A <25 µm Minimum System Air Pressure(5) 100 psig Material Hardcoated Aluminum Stage Body; Stainless Steel Collet Chuck MTBF (Mean Time Between Failure) 10,000 Hours Electrical Specifications Drive System Direct-drive servomotor Feedback System Non-contact optical encoder, 1 Vpp Sinusoidal output Maximum Bus Voltage 340 VDC Notes: 1. Maximum speed based on stage capability. Requires selection of appropriate amplifier with sufficient voltage and current. 2. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech if part load requirements exceed specifications. 3. Collect chuck accepts Rego-fix ER collets manufactured to DIN6499 specifications only. 4. Measured TIR of precision gage pin chucked with an ultra-precision ER collet (DIN6499) 10 mm away from collet face. 5. Collet chuck mechanism is normally-closed. Collet mechanism required air to open collet chuck. Air supply much be dry and oil-less OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 1 microns particle size or better.
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com4 www.aerotech.com LaserTurn5 ASR SPECIFICATIONS Mechanical Specifications Linear Axis Rotary Axis Travel 200 mm 300 mm ±360 deg. continuous Accuracy With -E2 Encoder Option Calibrated: ±1 µm Uncalibrated: ±5 µm ±73 µrad (±15 arc sec) With -E1 Encoder Option Calibrated: ±1 µm Uncalibrated: ±8 µm Calibrated: ±1 µm Uncalibrated: ±12 µm Bidirectional Repeatability ±0.5 µm ±15 µrad (±3 arc sec) Straightness ±2 µm ±3 µm N/A Flatness ±2 µm ±3 µm N/A Pitch 39 µrad (8 arc sec) 49 µrad (10 arc sec) N/A Yaw 39 µrad (8 arc sec) 49 µrad (10 arc sec) N/A Maximum Speed(1) 2 m/s 800 rpm 2000 rpm (-HS option) Tube Capacity N/A 10 mm (ER16, Dry Cut) 5.8 mm (ER16, Wet Cut) Maximum Force (Continuous) 197.2 N N/A Maximum Torque (Continuous) N/A 2.3 N·m (Dry Cut) Load Capacity(2) Axial 3.0 kg Radial 2.0 kg Moment 3 N·m Moving Mass (Unloaded) 18 kg N/A Rotor Inertia (Unloaded) N/A 0.0006 kg·m2 Stage Mass with Tooling Platforms 65 kg 69 kg N/A Collet Type(3) N/A ER16 Collet Runout(4) N/A <25 µm Minimum System Air Pressure(5) 100 psig Material Hardcoated Aluminum Stage Body; Stainless Steel Collet Chuck MTBF (Mean Time Between Failure) 10,000 Hours Electrical Specifications Drive System Direct-drive servomotor Feedback System Non-contact optical encoder, 1 Vpp Sinusoidal output Maximum Bus Voltage 340 VDC Notes: 1. Maximum speed based on stage capability. Requires selection of appropriate amplifier with sufficient voltage and current. 2. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech if part load requirements exceed specifications. 3. Collect chuck accepts Rego-fix ER collets manufactured to DIN6499 specifications only. 4. Measured TIR of precision gage pin chucked with an ultra-precision ER collet (DIN6499) 10 mm away from collet face. 5. Collet chuck mechanism is normally-closed. Collet mechanism required air to open collet chuck. Air supply much be dry and oil-less OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 1 microns particle size or better.
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com5www.aerotech.com LaserTurn5 ACS Series SPECIFICATIONS Mechanical Specifications Linear Axis Rotary Axis Travel 200 mm 300 mm ±360 deg. continuous Accuracy With -E2 Encoder Option Calibrated: ±1 µm Uncalibrated: ±5 µm Calibrated(1): ±24 µrad (±5 arc sec) Uncalibrated: ±146 µrad (±30 arc sec) With -E1 Encoder Option Calibrated: ±1 µm Uncalibrated: ±8 µm Calibrated: ±1 µm Uncalibrated: ±12 µm Bidirectional Repeatability ±0.5 µm ±15 µrad (±3 arc sec) Straightness ±2 µm ±3 µm N/A Flatness ±2 µm ±3 µm N/A Pitch 39 µrad (8 arc sec) 49 µrad (10 arc sec) N/A Yaw 39 µrad (8 arc sec) 49 µrad (10 arc sec) N/A Maximum Speed(2) 2 m/s 300 rpm Tube Capacity N/A 0.5-16 mm (ER25, Dry Cut) 1-12 mm (ER25, Wet Cut) 16-30 mm (ER40) Maximum Force (Continuous) 197.2 N N/A Maximum Torque (Continuous) N/A 5.06 N·m Load Capacity(3) Axial 10 kg (ER25), 15 kg (ER40) Radial 5 kg (ER25), 10 kg (ER40) Moment 6 kg (ER25), 12 kg (ER40) Moving Mass (Unloaded) 23 kg N/A Rotor Inertia (Unloaded) N/A 0.006 kg·m2 Stage Mass with Tooling Platforms 70 kg 75 kg N/A Collet Type(4) N/A ER25, ER40 Collet Runout(5) N/A <25 µm Minimum System Air Pressure(6) 100 psig Material Hardcoated Aluminum Stage Body; Stainless Steel Collet Chuck MTBF (Mean Time Between Failure) 10,000 Hours Electrical Specifications Drive System Direct-drive servomotor Feedback System Non-contact optical encoder, 1 Vpp Sinusoidal output Maximum Bus Voltage 340 VDC Notes: 1. Requires Aerotech controller and part programming as a rotary axis. 2. Maximum speed based on stage capability. Requires selection of appropriate amplifier with sufficient voltage and current. 3. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech if part load requirements exceed specifications. 4. Collect chuck accepts Rego-fix ER collets manufactured to DIN6499 specifications only. 5. Measured TIR of precision gage pin chucked with an ultra-precision ER collet (DIN6499) 10 mm away from collet face. 6. Collet chuck mechanism is normally-closed. Collet mechanism required air to open collet chuck. Air supply much be dry and oil-less OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 1 microns particle size or better.
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com6 www.aerotech.com LaserTurn 2 ASR DIMENSIONS FRONT ALIGNMENT GRIPPER (-FT3/-FT6) W/ REAR TOOLING PLATFORM (-RT1/-RT2) FRONT GRIPPER (-FT2/-FT5) NO TOOLING FRONT TOOLING (-FT1/-FT4) & REAR TOOLING (-RT1/-RT2) FRONT TOOLING (-FT1/-FT4) D F 7.9 CLEARANCE E C STAGE LENGTH WITH TOOLING OPTIONS F15 TYP -WCUT ONLY TOOLING PLATFORM TO WORK POINT WORK POINT OFFSET FROM TOOLING PLATFORM L D WRENCH FLATS MOTOR/FEEDBACK 6MM TUBE WET CUT WATER SUPPLY (-WCUT ONLY) 1/4 NPT 4MM TUBE COLLET AIR SUPPLY 152.4 150 G 190 H J 100 K 190.5101.6 K J OPTIONAL FRONT TOOLING PLATFORM STAGE MOUNTING M8 OF 3/8" HARDWARE OPTIONAL REAR TOOLING PLATFORM 181.3140 REF. 102.5 205 1/2 HARDSTOP C 1/2 NOMINAL A B 1/2 LIMIT LaserTurn2 (ER16 COLLET) STAGE SHOWN AT MID TRAVEL REVISIONS MCN REV. DESCRIPTION DATE APPROVED M18108 A UPDATED OPTION CODES, ADDED MORE DETAIL TO OPTIONS DRAWINGS, DIM "J" WAS BACKWARDS FOR TRAVEL OPTIONS 12-JAN-17 CSMITH BASE MODEL TRAVEL A B C D E F G H J K L ALC MODEL BY: MODEL FILENAME: LaserTurn2 A LaserTurn2 PART CODE: LaserTurn2-CAT PART NAME: DWG. NO. REV LaserTurn2 Linear/Rotary Motion Platform SHEET 1 OF 2 DATE BPO DRAWN ALC ALC NAME CHECKED ENG APPR. 9/06
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com7www.aerotech.com LaserTurn 2 ASR DIMENSIONS TYP 45 LEFT/FRONT/RIGHT 125 REF
25 TYP
15 TYP
40 TYP 25
10 TYP
150 REF
M6x1.0 9 TOP: 21X FRONT: 12X LEFT: 6X RIGHT: 6X (PATTERN ON RIGHT SIDE IS A MIRROR OF THE LEFT SIDE) REF 127
43.7 TYP
TYP 25.4 26.3 TYP 25.4 REF 152.4 10.5 TYP 25.4 1/4 - 20 .375" TOP: 21X FRONT: 12X LEFT: 6X RIGHT: 6X (PATTERN ON RIGHT SIDE IS A MIRROR OF THE LEFT SIDE)
25.4 TYP
TYP 25.4 LEFT/RIGHT TYP 10.5 LEFT/RIGHT 13.6 TYP 25.4 TYP 25.4 31.8 8X 1/4-20 .375" ENGLISH (-FT5) 13.5 TYP TYP METRIC (-FT2) 8X M6x1.0 9 121
13.5 TYP (-FT3)
13.7 TYP (-FT6)
25 TYP (-FT3)
25.4 TYP (-FT6)
(-FT3) 32 (-FT6) 31.8 +/- 0.75MM ADJUSTMENT ALL DIRECTIONS (-FT3) 8X M6X1.0 9 AJAW MATERIAL NON-MARRING RUBBER GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING DETAIL A SCALE 1 : 4 4X 3.2 [.1255"] REAM 4X M5x0.8 GRIPPER STROKE GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING JAW MATERIAL NON-MARRING RUBBER TOOLING PLATFORM, METRIC (-FT1/-RT1) GRIPPER OPTION TOOLING PLATFORM, ENGLISH (-FT4/-RT2) ALIGNMENT GRIPPER OPTION
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com8 www.aerotech.com LaserTurn 5 ASR DIMENSIONS 279.4 244 139.7 169.2 REF. 102 D STAGE REAR WET CUT 3/8 NPT MOTOR/FEEDBACK 6MM TUBE WET CUT WATER SUPPLY 250 254 G H 254 250 TYP J TYP K STAGE MOUNTING M8 OR 3/8" HARDWARE OPTIONAL FRONT TOOLING PLATFORM LaserTurn5-ASR FRONT GRIPPER w/ REAR TOOLING OPTION LaserTurn5-ASR FRONT GRIPPER TOOLING OPTION LaserTurn5-ASR NO TOOLING OPTION LaserTurn5-ASR FRONT TOOLING OPTION LaserTurn5-ASR FRONT/REAR TOOLING OPTION 1/2 NOMINAL A 1/2 HARDSTOP C 1/2 LIMIT B TOOLING PLATFORM TO WORK POINT F LaserTurn5-ASR WORK POINT OFFSET FROM TOOLING PLATFORM D EF C CLEARANCE LaserTurn5-ASR STAGE LENGTH WITH TOOLING OPTIONS 4MM TUBE COLLET AIR SUPPLY 3/8 NPT LaserTurn5-ASR ER16 COLLET DIMENSIONS - MILLIMETER STAGE REAR DRY CUT BASE MODEL TRAVEL A B C D E F G H J K LaserTurn5-ASR-200 200 100 105 110 586 25 100 450 457.2 125 127 LaserTurn5-ASR-300 300 150 155 160 686 25 100 500 508 150 152.4 REVISIONS ECN ZONE REV. DESCRIPTION DATE APPROVED
11202 A CHANGED VIEWS TO NEW WETCUT OPTION 6/26/2008 AFAZZINI
11429 B UPDATED VIEWS TO SHOW NEW DRY CUT REAR
ADDED STAGE REAR DRY CUT VIEW 06-OCT-08 RCAVAGNARO MCN18107 C ADDED THIRD ANGLE PROJECTION SYMBOL AND CHANGED LASERTURN5 TO LaserTurn5. 1/12/2017 EMOSIER JHAAG MODEL BY: MODEL FILENAME: LaserTurn5-ASR C PART CODE: ER16 COLLET LASERTURN5-ASR-CAT PART NAME: DWG. NO. REV LASERTURN5-ASR SHEET 1 OF 2 DATE BPO DRAWN JGH JGH NAME CHECKED ENG APPR. 9/06
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com9www.aerotech.com LaserTurn 5 ASR DIMENSIONS 200 TYP TYP M6x1.0 HELICOIL 175 32.5 TYP 32.5 177.8 25.4 32.5 TYP 31.1 203.2 25.4 18.4 76.2 25.4 11.9 25.4 TYP 50.8 TYP 50.8 25.4 24.6 1/4-20 HELICOIL GRIPPER STROKE TYP TYP 18.75 TYP 45.54 REF M6x1.0 HELICOIL JAW MATERIAL NON-MARRING RUBBER GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING 152 +/-0.75MM ADJUSTMENT ALL DIRECTIONS A JAW MATERIAL NON-MARRING RUBBER GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING METRIC ENGLISH 25.4 TYP 25.4 TYP 18.6 TYP 45.3 REF 1/4-20 HELICOIL DETAIL A SCALE 1 : 4 1/8" REAM (4-PLACES) M5x0.8 TAP (4-PLACES) TOOLING PLATFORM METRIC TOOLING PLATFORM ENGLISH GRIPPER OPTION ALIGNMENT GRIPPER OPTION
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com10 www.aerotech.com LaserTurn 5 ACS DIMENSIONS 279.4 244 102 169.2 REF 139.7 D MOTOR/FEEDBACK M3X0.5 x 4.5 DP EQ. SPACED ON 19 B.C. (8 PLACES) DRY CUT 250 254 G H 254 250 TYP J TYP K STAGE MOUNTING M8 OR 3/8" HARDWARE OPTIONAL FRONT TOOLING PLATFORM LaserTurn5-ACS FRONT GRIPPER w/ REAR TOOLING OPTION LaserTurn5-ACS FRONT GRIPPER TOOLING OPTION LaserTurn5-ACS NO TOOLING OPTION LaserTurn5-ACS FRONT TOOLING OPTION LaserTurn5-ACS FRONT/REAR TOOLING OPTION 1/2 NOMINAL A 1/2 HARDSTOP C 1/2 LIMIT B LaserTurn5-ACS
300 STAGE LENGTH WITH WET CUT
F LaserTurn5-ACS WORK POINT OFFSET FROM TOOLING PLATFORM D EF C CLEARANCE LaserTurn5-ACS STAGE LENGTH WITH TOOLING OPTIONS 1/2 LIMIT B 1/2 NOMINAL A 1/2 HARDSTOP C LaserTurn5-ACS
200 STAGE LENGTH WITH DRY CUT
-ER25 & -ER40 COLLET DIMENSIONS - MILLIMETER BASE MODEL TRAVEL A B C D E F G H J K LaserTurn5-ACS-200 200 100 105 110 586 25 100 450 457.2 125 127 LaserTurn5-ACS-300 300 150 155 160 686 25 100 500 508 150 152.4 REVISIONS MCN REV. DESCRIPTION DATE APPROVED MCN11430 A UPDATED TO SHOW WET CUT ROTARY UNION ADDED WET CUT PLAN VIEW ADDED WET CUT REAR VIEW CHANGED NOTE ON STAGE REAR MOUNTING 06-OCT-08 RCAVAGNARO MCN18106 B ADDED THIRD ANGLE PROJECTION SYMBOL AND CHANGED LASERTURN5 TO LaserTurn5. 1/12/2017 EMOSIER JHAAG MODEL BY: MODEL FILENAME: LaserTurn5-ACS B PART CODE: LASERTURN5-ACS-CAT PART NAME: DWG. NO. REV LASERTURN5-ACS SHEET 1 OF 2 DATE BPO DRAWN JGH JGH NAME CHECKED ENG APPR. 9/06
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com11www.aerotech.com LaserTurn 5 ACS DIMENSIONS 200 TYP TYP M6x1.0 HELICOIL 175 32.5 TYP 32.5 177.8 25.4 32.5 TYP 31.1 203.2 25.4 18.4 76.2 25.4 11.9 25.4 TYP 50.8 TYP 50.8 25.4 24.6 1/4-20 HELICOIL GRIPPER STROKE TYP TYP 18.75 TYP 45.5 REF M6x1.0 HELICOIL JAW MATERIAL NON-MARRING RUBBER GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING 152 +/-0.75MM ADJUSTMENT ALL DIRECTIONS A JAW MATERIAL NON-MARRING RUBBER GRIPPER OPEN/CLOSE 4MM TUBE PNEUMATIC FITTING METRIC ENGLISH 25.4 TYP 25.4 TYP 18.6 TYP 45.3 REF 1/4-20 HELICOIL DETAIL A SCALE 1 : 4 1/8" REAM (4-PLACES) M5x0.8 TAP (4-PLACES) TOOLING PLATFORM METRIC TOOLING PLATFORM ENGLISH GRIPPER OPTION ALIGNMENT GRIPPER OPTION
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com12 www.aerotech.com LaserTurn2 Linear/Rotary Motor Platform ORDERING INFORMATION Travel (Required) -200 200 mm linear axis travel -300 300 mm linear axis travel Feedback (Required) -E1 Incremental linear encoder, 1 Vpp (linear axis) -E2 High-accuracy incremental linear encoder, 1 Vpp (linear axis) Rotary Speed (Required) -SS Standard speed rotary axis -HS High speed rotary axis Cutting Configuration (Required) -DCUT Dry cutting configuration -WCUT Wet cutting configuration with fluid rotary union Front Tooling (Optional) -FT1 Metric front tooling platform -FT2 Metric front tooling platform with gripper -FT3 Metric front tooling platform with alignment gripper -FT4 English front tooling platform -FT5 English front tooling platform with gripper -FT6 English front tooling platform with alignment gripper Gripper Jaws (Optional) -J1 Gripper jaws for 0-10 mm tube diameters Rear Tooling (Optional) -RT1 Metric rear tooling platform -RT2 English rear tooling platform Metrology - Linear (Required) -PL1 Metrology, uncalibrated with performance plots -PL2 Metrology, calibrated (halar) with performance plots Metrology option applies to linear axis only. Integration (Required) Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system. -TAS Integration - Test as system Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration. -TAC Integration - Test as components Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system. Accessories (to be ordered as separate line item) Collet-ER16-CLTxxx ER16 collet - consult with Aerotech for available sizes RingSeal-ER16-RSxx Ring seal for wet cutting - consult with Aerotech for available sizes CGF Collet and Gripper Filtration Kit
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com13www.aerotech.com LaserTurn5-ASR Linear/Rotary Motion Platform ORDERING INFORMATION Travel (Required) -200 200 mm linear axis travel -300 300 mm linear axis travel Feedback (Required) -E1 Incremental linear encoder, 1 Vpp (linear axis) -E2 High-accuracy incremental linear encoder, 1 Vpp (linear axis) Rotary Speed (Required) -SS Standard speed rotary axis -HS High speed rotary axis Cutting Configuration (Required) -DCUT Dry cutting configuration -WCUT Wet cutting configuration with fluid rotary union Front Tooling (Optional) -FT1 Metric front tooling platform -FT2 Metric front tooling platform with gripper -FT3 Metric front tooling platform with alignment gripper -FT4 English front tooling platform -FT5 English front tooling platform with gripper -FT6 English front tooling platform with alignment gripper Gripper Jaws (Optional) -J1 Gripper jaws for 0-10 mm tube diameters Rear Tooling (Optional) -RT1 Metric rear tooling platform -RT2 English rear tooling platform Metrology - Linear (Required) -PL1 Metrology, uncalibrated with performance plots -PL2 Metrology, calibrated (halar) with performance plots Metrology option applies to linear axis only. Integration (Required) Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system. -TAS Integration - Test as system Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration. -TAC Integration - Test as components Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system. Accessories (to be ordered as separate line item) Collet-ER16-CLTxxx ER16 collet - consult with Aerotech for available sizes RingSeal-ER16-RSxx Ring seal for wet cutting - consult with Aerotech for available sizes CGF Collet and Gripper Filtration Kit
LaserTurn2/LaserTurn5 Laser and Medical Systems www.aerotech.com14 www.aerotech.com LaserTurn 5 ACS Series ORDERING INFORMATION Travel (Required) -200 200 mm linear axis travel -300 300 mm linear axis travel Feedback (Required) -E1 Incremental linear encoder, 1 Vpp (linear axis) -E2 High-accuracy incremental linear encoder, 1 Vpp (linear axis) Collet Style (Required) -ER25 ER25 ultra-precision collet chuck -ER40 ER40 ultra-precision collet chuck Cutting Configuration (Required) -DCUT Dry cutting configuration -WCUT Wet cutting configuration with fluid rotary union Front Tooling (Optional) -FT1 Metric front tooling platform -FT2 Metric front tooling platform with gripper -FT3 Metric front tooling platform with alignment gripper -FT4 English front tooling platform -FT5 English front tooling platform with gripper -FT6 English front tooling platform with alignment gripper Gripper Jaws (Optional) -J1 Gripper jaws for 0-10 mm tube diameters -J2 Gripper jaws for 8-18 mm tube diameters -J3 Gripper jaws for 16-26 mm tube diameters -J4 Gripper jaws for 24-34 mm tube diameters Rear Tooling (Optional) -RT1 Metric rear tooling platform -RT2 English rear tooling platform Metrology - Linear (Required) -PL1 Metrology, uncalibrated with performance plots -PL2 Metrology, calibrated (halar) with performance plots Metrology option applies to linear axis only. Metrology - Rotary (Required) -PL1 Metrology, uncalibrated with performance plots -PL2 Metrology, calibrated (halar) with performance plots Metrology option applies to linear axis only
Laser and Medical Systems LaserTurn2/LaserTurn5 www.aerotech.com Integration (Required) Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system. -TAS Integration - Test as system Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration. -TAC Integration - Test as components Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system. Accessories (to be ordered as separate line item) Collet-ER25-CLTxxx ER25 Collet - Consult with Aerotech for available sizes Collet-ER40-CLTxxx ER40 Collet - Consult with Aerotech for available sizes RingSeal-ER25-RSxx Ring Seal for Wet Cutting, ER25 Collet - Consult with Aerotech for available sizes RingSeal-ER40-RSxx Ring Seal for Wet Cutting, ER40 Collet - Consult with Aerotech for available sizes CGF Collet and Gripper Filtration Kit (add link to data sheet) LaserTurn 5 ACS Series ORDERING INFORMATION