LDTC114EM3T5G

LDTC114EM3T5G_15 LRC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

LESHAN RADIO COMPANY, LTD. Bias Resistor Transistors NPN Silicon Surface Mount Transistors With Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-723 package which is designed for low power surface mount applications. LDTC114EM3T5G MAXIMUM RATINGS A = 25°C unless otherwise noted) Rating Symbol Value Unit Collector-Base Voltage V CBO Vdc Collector-Emitter Voltage V CEO Vdc Collector Current I C 100 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation T A = 25°C Derate above 25°C P D 260 (Note 1) 600 (Note 2) 2.0 (Note 1) 4.8 (Note 2) mW Thermal Resistance – Junction-to-Ambient R θJA 480 (Note 1) 205 (Note 2) °C/W Storage Temperature Range T stg –55 to +150 xx = Specific Device Code M = Date Code MARKING DIAGRAM XX M mW/ °C ƽ Simplifies Circuit Design ƽ Reduces Component Count ƽ The SOT-723 Package can be Soldered using Wave or Reflow. ƽ Available in 4 mm, 8000 Unit Tape & Reel ƽThese are Pb-Free Devices. ƽ Reduces Board Space Series SOT-723 PIN 3 COLLECTOR (OUTPUT) PIN 2 EMITTER (GROUND) PIN 1 BASE (INPUT) T J 150Junction Temperature 1. FR–4 @ Minimum Pad 2. FR–4 @ 1.0 x 1.0 inch Pad Rev.O 1/14 LDTC114EM3T5G S-LDTC114EM3T5G Series ƽ and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. S- Prefix for Automotive and Other Applications Requiring Unique Site

LESHAN RADIO COMPANY, LTD. DEVICE MARKING AND RESISTOR VALUES Device Marking R1 (K) R2 (K) Package Shipping LDTC114EM3T5G LDTC124EM3T5G LDTC144EM3T5G LDTC114YM3T5G LDTC114TM3T5G LDTC143TM3T5G LDTC123EM3T5G LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G LDTC115EM3T5G LDTC144WM3T5G LDTC144TM3T5G 4.7 2.2 4.7 4.7 2.2 100 2.2 4.7 100 SOT−723 8000/Tape & Reel Rev.O 2/14 S-LDTC114EM3T5G S-LDTC124EM3T5G S-LDTC144EM3T5G S-LDTC114YM3T5G S-LDTC114TM3T5G S-LDTC143TM3T5G S-LDTC123EM3T5G S-LDTC143EM3T5G S-LDTC143ZM3T5G S-LDTC124XM3T5G S-LDTC123JM3T5G S-LDTC115EM3T5G S-LDTC144WM3T5G S-LDTC144TM3T5G ;S-S-LDTC114EM3T5GS-LDTC114EM3T5G Series

LESHAN RADIO COMPANY, LTD.

ELECTRICAL CHARACTERISTICS

A = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector−Base Cutoff Current (V CB = 50 V, I E = 0) I CBO 100 nAdc Collector−Emitter Cutoff Current (V CE = 50 V, I B = 0) I CEO 500 nAdc Emitter−Base Cutoff Current LDTC114EM3T5G EB = 6.0 V, I C = 0) LDTC124EM3T5G LDTC144EM3T5G LDTC114YM3T5G LDTC114TM3T5G LDTC143TM3T5G LDTC123EM3T5G LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G LDTC115EM3T5G LDTC144WM3T5G LDTC144TM3T5G I EBO 0.5 0.2 0.1 0.2 0.9 1.9 2.3 1.5 0.18 0.13 0.2 0.05 0.13 0.2 mAdc Collector−Base Breakdown Voltage (I C = 10 /C0109A, I E = 0) V (BR)CBO Vdc Collector−Emitter Breakdown Voltage (Note 3) C = 2.0 mA, I B = 0) V (BR)CEO Vdc ON CHARACTERISTICS (Note 3) DC Current Gain LDTC114EM3T5G CE = 10 V, I C = 5.0 mA) LDTC124EM3T5G LDTC144EM3T5G LDTC114YM3T5G LDTC114TM3T5G LDTC143TM3T5G LDTC123EM3T5G LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G LDTC115EM3T5G LDTC144WM3T5G LDTC144TM3T5G h FE 160 160 8.0 160 100 140 140 350 350 200 150 140 150 140 350 Collector−Emitter Saturation Voltage (I C = 10 mA, I B = 0.3 mA) C = 10 mA, I B = 5 mA) LDTC123EM3T5G C = 10 mA, I B = 1 mA) LDTC143TM3T5G/LDTC114TM3T5G/ LDTC143EM3T5G/LDTC143ZM3T5G/ LDTC124XM3T5G/LDTC144TM3T5G V CE(sat) 0.25 Vdc Output Voltage (on) CC = 5.0 V, V B = 2.5 V, R L = 1.0 k/C0087) LDTC114EM3T5G LDTC124EM3T5G LDTC114YM3T5G LDTC114TM3T5G LDTC143TM3T5G LDTC123EM3T5G LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G CC = 5.0 V, V B = 3.5 V, R L = 1.0 k/C0087) LDTC144EM3T5G LDTC144TM3T5G CC = 5.0 V, V B = 5.5 V, R L = 1.0 k/C0087) LDTC115EM3T5G CC = 5.0 V, V B = 4.0 V, R L = 1.0 k/C0087) LDTC144WM3T5G V OL 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 Vdc 3. Pulse Test: Pulse Width < 300 /C0109s, Duty Cycle < 2.0%. Rev.O 3/14 ;S-S-LDTC114EM3T5GS-LDTC114EM3T5G Series

LESHAN RADIO COMPANY, LTD. A = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit ON CHARACTERISTICS (Note 4) Characteristic Symbol Min Typ Max Unit Output Voltage (off) (V CC = 5.0 V, V B = 0.5 V, R L = 1.0 k/C0087) CC = 5.0 V, V B = 0.25 V, R L = 1.0 k/C0087) LDTC143TM3T5G LDTC143ZM3T5G LDTC114TM3T5G LDTC144TM3T5G V OH 4.9 Vdc Input Resistor LDTC114EM3T5G LDTC124EM3T5G LDTC144EM3T5G LDTC114YM3T5G LDTC114TM3T5G LDTC143TM3T5G LDTC123EM3T5G LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G LDTC115EM3T5G LDTC144WM3T5G LDTC144TM3T5G 7.0 15.4 32.9 7.0 7.0 3.3 1.5 3.3 3.3 15.4 1.54 32.9 32.9 4.7 2.2 4.7 4.7 2.2 100 28.6 61.1 6.1 2.9 6.1 6.1 28.6 2.86 130 61.1 61.1 k/C0087 Resistor Ratio LDTC114EM3T5G/LDTC124EM3T5G/ LDTC144EM3T5G/LDTC115EM3T5G LDTC114YM3T5G LDTC143TM3T5G/LDTC114TM3T5G/LDTC144TM3T5G LDTC123EM3T5G/LDTC143EM3T5G LDTC143ZM3T5G LDTC124XM3T5G LDTC123JM3T5G LDTC144WM3T5G R 0.8 0.17 0.8 0.055 0.38 0.038 1.7 1.0 0.21 1.0 0.1 0.47 0.047 2.1 1.2 0.25 1.2 0.185 0.56 0.056 2.6 4. Pulse Test: Pulse Width < 300 /C0109s, Duty Cycle < 2.0%. Figure 1. Derating Curve

D E b e A L C H −Y− −X− X0.08 (0.0032) Y E1 2 1.0 0.039 /C0466 mm inches /C0467 0.40 0.0157 0.40 0.0157 0.40 0.0157 0.40 0.0157 0.40 0.0157 PIN 1. BASE 2. EMITTER 3. COLLECTOR DIM MIN NOM MAX MILLIMETERS A 0.45 0.50 0.55 b 0.15 0.20 0.27 b1 0.25 0.3 0.35 C 0.07 0.12 0.17 D 1.15 1.20 1.25 E 0.75 0.80 0.85 e 0.40 BSC H 1.15 1.20 1.25 L 0.15 0.20 0.25 0.018 0.020 0.022 0.0059 0.0079 0.0106 0.010 0.012 0.014 0.0028 0.0047 0.0067 0.045 0.047 0.049 0.03 0.032 0.034

0.016 BSC

0.045 0.047 0.049 0.0059 0.0079 0.0098 MIN NOM MAX INCHES E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. SOT−723 SOLDERING FOOTPRINT LESHAN RADIO COMPANY, LTD. Rev.O 11/14 ;S-S-LDTC114EM3T5GS-LDTC114EM3T5G Series

cavity for the product when sealed with the “peel–back” cover tape. one full reel for each line item, and orders are required to be in increments of the single reel quantity. Table 1. EMBOSSED TAPE AND REEL ORDERING INFORMATION

K t B K See Note 1 Top Cover Tape D A B P Embossment P P

10 Pitches Cumulative Tolerance on

E WF Center Lines of Cavity D For Components 2.0mm x 1.2mm and Larger User Direction of Feed Bar Code Label *Top Cover Tape Thickness(t 0.10mm (0.004’’ )Max. Embossed Carrier Embossment EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS R Min Tape and Components Shall Pass Around Radius “R” Without DamageBending Radius Maximum Component Rotation Typical Component Cavity Center Line 100 mm (3.937 ’’) 250 mm (9.843’’) 1 mm(.039’’ ) Max 1 mm Max o Typical Component Center Line For Machine Reference Only Including Draft and RADII Concentric Around B Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm Tape DIMENSIONS Tape Size B Max D D EF K P P RMin TMax WMax 4.55mm (.179’’) 8.2mm (.323’’) 12.1mm (.476’’) 20.1mm (.791’’) 1.5+0.1mm - 0.0 (.059+.004’’ - 0.0) 1.0Min (.039’’) 1.5mm Min (.060’’) 1.75 ± 0.1mm (.069 ± .004) 3.5 ± 0.05mm (.138±.002’’) 5.5 ± 0.05mm (.217 ± .002’’) 7.5 ± 0.10mm (.295 ± .004’’) 11.5 ± 0.1mm (.453 ± .004’’) 2.4mm Max (.094’’) 6.4mm Max (.252’’) 7.9mm Max (.311’’) 11.9mm Max (.468’’) 4.0 ± 0.1mm (.157 ± .004’’) 2.0 ± 0.1mm (.079 ± .002’’) 25mm (.98’’) 30mm (1.18’’) Metric dimensions govern - English are in parentheses for reference only. NOTE 1: A , B , and K are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to.50 mm max., NOTE 2: the component cannot rotate more than 10 o within the determined cavity. NOTE 3: If B exceeds 4.2 mm (.165”) for 8 mm embossed tape, the tape may not feed through all tape feeders. 0.6mm (.024’’) 8.3mm (.327’’) 12 ± .30mm (.470 ± .012’’) 16.3mm (.642’’) 24.3mm (.957’’) 8mm 12mm 16mm 24mm LESHAN RADIO COMPANY, LTD. Rev.O 13/14

Metric Dimensions Govern –– English are in parentheses for reference only EMBOSSED TAPE AND REEL DATA FOR DISCRETES A T Max Outside Dimension Measured at Edge G Inside Dimension Measured Near Hub 20.2mm Min (.795’’) 1.5mm Min (.06’’) 13.0mm ± 0.5mm (.512 ±.002’’) 50mm Min (1.969’’) Full Radius Size A Max G T Max 8 mm 12mm 16mm 24 mm 330mm (12.992’’) 330mm (12.992’’) 360mm (14.173’’) 360mm (14.173’’) 8.4mm+1.5mm, -0.0 12.4mm+2.0mm, -0.0 16.4mm+2.0mm, -0.0 24.4mm+2.0mm, -0.0 14.4mm (.56’’) 18.4mm (.72’’) 22.4mm (.882’’) 30.4mm (1.197’’) LESHAN RADIO COMP ANY , LTD. Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) Rev.O 14/14