LDTA123EM3T5G

LDTA114EM3T5G LRC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

LESHAN RADIO COMPANY, LTD. LDTA114EM3T5G_S-1/11 Bias Resistor Transistors PNP Silicon Surface Mount Transistors With Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-723 package which is designed for low power surface mount applications. LDTA114EM3T5G MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit Collector-Base Voltage VCBO Vdc Collector-Emitter Voltage VCEO Vdc Collector Current IC 100 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation TA = 25°C Derate above 25°C PD 260 (Note 1) 600 (Note 2) 2.0 (Note 1) 4.8 (Note 2) mW Thermal Resistance – Junction-to-Ambient RθJA 480 (Note 1) 205 (Note 2) °C/W Junction and Storage Temperature Range TJ, Tstg –55 to +150 1. FR–4 @ Minimum Pad 2. FR–4 @ 1.0 x 1.0 inch Pad PIN 3 COLLECTOR (OUTPUT) PIN 2 EMITTER (GROUND) PIN 1 BASE (INPUT) xx = Specific Device Code M = Date Code MARKING DIAGRAM XX M mW/°C ƽSimplifies Circuit Design ƽReduces Component Count ƽThe SOT-723 Package can be Soldered using Wave or Reflow. ƽAvailable in 4 mm, 8000 Unit Tape & Reel ƽThese are Pb-Free Devices. ƽReduces Board Space Version 1.0 Series SOT-723

LESHAN RADIO COMPANY, LTD. LDTA114EM3T5G_S-2/11 LDTA114EM3T5G_Series ORDERING INFORMATION, DEVICE MARKING AND RESISTOR VALUES Device Marking R1 (K) R2 (K) Package Shipping LDTA114EM3T5G LDTA124EM3T5G LDTA144EM3T5G LDTA114YM3T5G LDTA114TM3T5G LDTA143TM3T5G LDTA123EM3T5G LDTA143EM3T5G LDTA143ZM3T5G LDTA124XM3T5G LDTA123JM3T5G LDTA115EM3T5G LDTA144WM3T5G 4.7 2.2 4.7 4.7 2.2 100 2.2 4.7 100 SOT−723 (Pb−Free) 8000/Tape & Reel Version 1.0

LESHAN RADIO COMPANY, LTD. LDTA114EM3T5G_S-3/11 LDTA114EM3T5G_Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector−Base Cutoff Current (VCB = 50 V, IE = 0) ICBO 100 nAdc Collector−Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO 500 nAdc Emitter−Base Cutoff Current LDTA114EM3T5G (VEB = 6.0 V, IC = 0) LDTA124EM3T5G LDTA144EM3T5G LDTA114YM3T5G LDTA114TM3T5G LDTA143TM3T5G LDTA123EM3T5G LDTA143EM3T5G LDTA143ZM3T5G LDTA124XM3T5G LDTA123JM3T5G LDTA115EM3T5G LDTA144WM3T5G IEBO 0.5 0.2 0.1 0.2 0.9 1.9 2.3 1.5 0.18 0.13 0.2 0.05 0.13 mAdc Collector−Base Breakdown Voltage (IC = 10 A, IE = 0) V(BR)CBO Vdc Collector−Emitter Breakdown Voltage (Note 3.) (IC = 2.0 mA, IB = 0) V(BR)CEO Vdc ON CHARACTERISTICS (Note 3.) DC Current Gain LDTA114EM3T5G (VCE = 10 V, IC = 5.0 mA) LDTA124EM3T5G LDTA144EM3T5G LDTA114YM3T5G LDTA114TM3T5G LDTA143TM3T5G LDTA123EM3T5G LDTA143EM3T5G LDTA143ZM3T5G LDTA124XM3T5G LDTA123JM3T5G LDTA115EM3T5G LDTA144WM3T5G hFE 160 160 8.0 100 140 140 250 250 140 130 140 150 140 Collector−Emitter Saturation Voltage (IC = 10 mA, IE = 0.3 mA) (IC = 10 mA, IB = 5 mA) LDTA123EM3T5G (IC = 10 mA, IB = 1 mA) LDTA114TM3T5G/LDTA143TM3T5G/ LDTA143ZM3T5G/LDTA124XM3T5G/LDTA143EM3T5G VCE(sat) 0.25 Vdc Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k) LDTA114EM3T5G LDTA124EM3T5G LDTA114YM3T5G LDTA114TM3T5G LDTA143TM3T5G LDTA123EM3T5G LDTA143EM3T5G LDTA143ZM3T5G LDTA124XM3T5G LDTA123JM3T5G (VCC = 5.0 V, VB = 3.5 V, RL = 1.0 k) LDTA144EM3T5G (VCC = 5.0 V, VB = 5.5 V, RL = 1.0 k) LDTA115EM3T5G (VCC = 5.0 V, VB = 4.0 V, RL = 1.0 k) LDTA144WM3T5G VOL 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 Vdc Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k) (VCC = 5.0 V, VB = 0.25 V, RL = 1.0 k) LDTA114TM3T5G LDTA143TM3T5G LDTA123EM3T5G LDTA143EM3T5G VOH 4.9 Vdc 3. Pulse Test: Pulse Width < 300 s, Duty Cycle < 2.0% Version 1.0

Figure 1. Derating Curve

LDTA114EM3T5G_S-11/11 LDTA114EM3T5G_Series PACKAGE DIMENSIONS D E b e A L C H −Y− −X− X 0.08 (0.0032) Y E 1.0 0.039 mm inches 0.40 0.0157 0.40 0.0157 0.40 0.0157 0.40 0.0157 0.40 0.0157 PIN 1. BASE 2. EMITTER 3. COLLECTOR DIM MIN NOM MAX MILLIMETERS A 0.45 0.50 0.55 b 0.15 0.20 0.27 0.25 0.3 0.35 C 0.07 0.12 0.17 D 1.15 1.20 1.25 E 0.75 0.80 0.85 e

0.40 BSC

H 1.15 1.20 1.25 L 0.15 0.20 0.25 0.018 0.020 0.022 0.0059 0.0079 0.0106 0.010 0.012 0.014 0.0028 0.0047 0.0067 0.045 0.047 0.049 0.03 0.032 0.034

0.016 BSC

0.045 0.047 0.049 0.0059 0.0079 0.0098 MIN NOM MAX INCHES E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. SOT−723 SOLDERING FOOTPRINT Version 1.0 LESHAN RADIO COMPANY, LTD.