LDC60F-2-SN

LDC15F Cosel

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

V1 +5V 2.0 (Peak 3.0)A +5V 2.0(Peak 3.0)A V2 +12V 0.3 (Peak 0.6)A +15V 0.3(Peak 0.6)A V3 -12V 0.2 (Peak 0.3)A -15V 0.2(Peak 0.3)A SPECIFICATIONS MODEL LDC15F-1 LDC15F-2 INPUT VOLTAGE[V] AC85 -2 64 1f or DC110-370 CURRENT[A] ACIN 100V 0.4typ (Io=100%) FREQUENCY[Hz] 47 -4 40 or DC EFFICIENCY[%] ACIN 100V 70typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 25typ (Io=100%) ACIN 200V 50typ (Io=100%) LEAKAGE CURRENT[mA] 0.75max (60Hz, Accordingt oUL, CSA, VDEa nd DEN-AN) OUTPUT VOLTAGE[V] +5 +12 -12 +5 +15 -15 LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max LOAD REGULATION[mV] 100max 120max 120max 100max 150max 150max RIPPLE[mVp-p] 0t o +50C*2 100max 120max 120max 100max 120max 120max -10-0 C*2 140max 160max 160max 140max 160max 160max RIPPLE NOISE[mVp-p] 0t o +50C*2 120max 150max 150max 120max 150max 150max -10-0 C*2 160max 180max 180max 160max 180max 180max TEMPERATURE REGULATION[mV] 0t o +50C 50max 350max 350max 50max 350max 350max -10t o +50C 60max 420max 420max 60max 420max 420max DRIFT[mV] *3 20max xx xx 20max xx xx START-UP TIME[ms] 100max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%), 100typ (ACIN 200V, Io=100%) OUTPUTV OLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Workso ver 105 %o frating and recovers automatically OVERVOLTAGE PROTECTION Workso ver 115%o frating by zener diode clamping(+5V only) OPERATING INDICATION Not provided REMOTE SENSING Not provided REMOTE ON/OFF Not provided ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) OUTPUT-FG AC500V1 minute, Cutoff current=100mA , DC500V 50MW min (At RoomT emperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V1 minute, Cutoff current=100mA , DC100V 10MW min (At RoomT emperature) ENVIRONMENT OPERATINGT EMP.,HUMID.ANDA LTITUDE -10 to +60C, 20-90%RH (Non condensing)( Refer to DERATING CURVE), 3,000m (10,000feet) STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y andZaxis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Y and Z axis SAFETYA ND NOISE REGULATIONS AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2N o.60950-1 Complies with DEN-AN and IEC60950-1 CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B OTHERS CASE SIZE/WEIGHT 50X26X127mm [1.97X1.02X5 inches] (WXHXD) /150g max (with chassis & cover : 300g max) COOLING METHOD Convection *1 P eak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 16W, -2: 17.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current. Measured b y 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101). Dr ift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output. Please contact us about saf ety approvals for the model with option. A void prolonged use under over-load. Der ating is required when operated with chassis and cover. LDC15F AC-DC Power Supplies Open Frame/Enclosed Type LD C 15 F -1 - O

Ordering information

1 Series name

Optional *4 C : with Coating G Lo w leakage current S with Chassis SN : with Chassis & co ver Y with Potentiometer R 1 2 3 4 5 6 March 13, 2019

¡DERATING CURVE¡OVERCURRENT CHARACTERISTICS (LDC15F-1) ¡RISE TIME & FALL TIME (LDC15F-1)¡STATIC CHARACTERISTICS (LDC15F-1) External view ¶ Weight: 150g max(with chassis & cover : 300g max) ¶ Tolerance: t1[t0.04] ¶ Dimensions in mm,[ ]=inches ¶ PCB Material: Glass composite(CEM3) ¶ Chassis and cover is optional. ¶ Mounting torque: 0.6N·m(6.3kgf·cm)max 4- f3.5 [0.14] f3.5 [0.14] 50 [1.97] 57 [2.24] 28.5 [1.12] [0.91] 127 [5] 147 [5.79] 19 [0.95] PCB t=1.6 [0.06] 3.5 [0.14] 3.5 [0.14] 3.5 [0.14] 3max [0.12] 3.5 [0.14] [0.39] [0.75] [1.50] 6 [0.24] 6 [0.24] [0.59] f3.5 [0.14] 4.75 [0.19] 43±0.5 [1.69] 120±0.5 [4.72] 135±0.5 [5.31] 135±0.5 [5.31] 25±0.5 [0.98] Performance data LDC15F March 13, 2019

V1 +5V 3.0 (Peak 4.5)A +5V 3.0(Peak 4.5)A V2 +12V 1.2 (Peak 2.0)A +15V 1.0(Peak 2.0)A V3 -12V 0.3 (Peak 0.45)A -15V 0.3(Peak 0.45)A SPECIFICATIONS MODEL LDC30F-1 LDC30F-2 INPUT VOLTAGE[V] AC85 -2 64 1f or DC110-370 CURRENT[A] ACIN 100V 0.8typ (Io=100%) FREQUENCY[Hz] 47 -4 40 or DC EFFICIENCY[%] ACIN 100V 72typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 25typ (Io=100%)( At cold start) ACIN 200V 50typ (Io=100%)( At cold start) LEAKAGE CURRENT[mA] 0.75max (60Hz, Accordingt oU L, CSA, VDEa nd DEN-AN) OUTPUT VOLTAGE[V] +5 +12 -12 +5 +15 -15 LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max LOAD REGULATION[mV] 100max 120max 150max 100max 120max 150max RIPPLE[mVp-p] 0t o +50C*2 100max 120max 120max 100max 120max 120max -10-0 C*2 150max 160max 160max 150max 160max 160max RIPPLE NOISE[mVp-p] 0t o +50C*2 120max 150max 150max 120max 150max 150max -10-0 C*2 170max 180max 180max 170max 180max 180max TEMPERATURE REGULATION[mV] 0t o +50C 50max 350max 350max 50max 350max 350max -10t o +50C 60max 420max 420max 60max 420max 420max DRIFT[mV] *3 20max xx xx 20max xx xx START-UP TIME[ms] 100max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%), 100typ (ACIN 200V, Io=100%) OUTPUTV OLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Workso ver 105%o frating and recovers automatically OVERVOLTAGE PROTECTION Worksa t 115-140%o fr ating (+5V only) OPERATING INDICATION Not provided REMOTE SENSING Not provided REMOTE ON/OFF Not provided ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) OUTPUT-FG AC500V1 minute, Cutoff current=100mA , DC500V 50MW min (At RoomTemperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V1 minute, Cutoff current=100mA , DC100V 10MW min (At RoomTemperature) ENVIRONMENT OPERATINGT EMP.,HUMID.ANDA LTITUDE -10 to +60C, 20-90%RH (Non condensing)( Refer to DERATING CURVE), 3,000m (10,000feet) STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y andZaxis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Y and Z axis SAFETYA ND NOISE REGULATIONS AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2N o.60950-1 Complies with DEN-AN and IEC60950-1 CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B OTHERS CASE SIZE/WEIGHT 65X26X140mm [2.56X1.02X5.51 inches] (WXHXD) / 220g max (with chassis & cover : 400g max) COOLING METHOD Convection *1 P eak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 33W, -2: 34.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current. Measured b y 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101). Dr ift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output. Please contact us about saf ety approvals for the model with option. A void prolonged use under over-load. Der ating is required when operated with chassis and cover. LDC30F AC-DC Power Supplies Open Frame/Enclosed Type LD C 30 F -1 - O Optional *4 C : with Coating G Lo w leakage current S with Chassis SN : with Chassis & co ver Y with Potentiometer R 1 2 3 4 5 6 March 13, 2019

¡DERATING CURVE¡OVERCURRENT CHARACTERISTICS (LDC30F-1) ¡RISE TIME & FALL TIME (LDC30F-1)¡STATIC CHARACTERISTICS (LDC30F-1) External view ¶ Weight: 220g max(with chassis & cover : 400g max) ¶ Tolerance: t1[t0.04] ¶ Dimensions in mm,[ ]=inches ¶ PCB Material: Glass composite(CEM3) ¶ Chassis and cover is optional. ¶ Mounting torque: 0.6N·m(6.3kgf·cm)max 4- f3.5 [0.14] f3.5 [0.14] 65 [2.56] 72 [2.83] 36 [1.42] [0.91] 140 [5.51] 160 [6.30] 57.5 [2.26] PCB t=1.6 [0.06] 4 [0.16] 3.5 [0.14] 3.5 [0.14] 3max [0.12] [0.16] [0.39] [0.75] [1.50] 5 [0.20] 5 [0.20] [1.02] 2-f3.5 [0.14] 9.25 [0.36] 57±0.5 [2.24] 132±0.5 [5.20] 150±0.5 [5.91] 150±0.5 [5.91] 20±0.5 [0.79] [0.63] 40±0.5 [1.57] Performance data LDC30F March 13, 2019

V1 +5V 5.0 (Peak 7.0)A +5V 5.0(Peak 7.0)A V2 +12V 2.5 (Peak 3.5)A +15V 2.0(Peak 3.5)A V3 -12V 0.5 (Peak 0.7)A -15V 0.5(Peak 0.7)A SPECIFICATIONS MODEL LDC60F-1 LDC60F-2 INPUT VOLTAGE[V] AC85 -2 64 1f or DC110-370 CURRENT[A] ACIN 100V 1.4typ (Io=100%) FREQUENCY[Hz] 47 -4 40 or DC EFFICIENCY[%] ACIN 100V 72typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 30typ (Io=100%)( At cold start) ACIN 200V 60typ (Io=100%)( At cold start) LEAKAGE CURRENT[mA] 0.75max (60Hz, Accordingt oU L, CSA, VDEa nd DEN-AN) OUTPUT VOLTAGE[V] +5 +12 -12 +5 +15 -15 LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max LOAD REGULATION[mV] 100max 150max 150max 100max 150max 150max RIPPLE[mVp-p] 0t o +50C*2 100max 120max 120max 100max 120max 120max -10-0 C*2 150max 160max 160max 150max 160max 160max RIPPLE NOISE[mVp-p] 0t o +50C*2 120max 150max 150max 120max 150max 150max -10-0 C*2 170max 180max 180max 170max 180max 180max TEMPERATURE REGULATION[mV] 0t o +50C 50max 350max 350max 50max 350max 350max -10t o +50C 60max 420max 420max 60max 420max 420max DRIFT[mV] *3 20max xx xx 20max xx xx START-UP TIME[ms] 200max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%), 100typ (ACIN 200V, Io=100%) OUTPUTV OLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Workso ver 105%o frating and recovers automatically OVERVOLTAGE PROTECTION Workso ver 115%o frating by zener diode clamping(only available withV1, V2) OPERATING INDICATION Not provided REMOTE SENSING Not provided REMOTE ON/OFF Not provided ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current=10mA , DC500V 50MW min (At Room Temperature) OUTPUT-FG AC500V1 minute, Cutoff current=100mA , DC500V 50MW min (At RoomTemperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V1 minute, Cutoff current=100mA , DC100V 10MW min (At RoomTemperature) ENVIRONMENT OPERATINGT EMP.,HUMID.ANDA LTITUDE -10 to +60C, 20-90%RH (Non condensing)( Refer to DERATING CURVE), 3,000m (10,000feet) STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y andZaxis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Y and Z axis SAFETYA ND NOISE REGULATIONS AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2N o.60950-1 Complies with DEN-AN and IEC60950-1 CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B OTHERS CASE SIZE/WEIGHT 83X26X185mm [3.27X1.02X7.28 inches] (WXHXD) / 300g max (with chassis & cover : 550g max) COOLING METHOD Convection *1 P eak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 61W, -2: 62.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current. Measured b y 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101). Dr ift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output. Please contact us about saf ety approvals for the model with option. A void prolonged use under over-load. Der ating is required when operated with chassis and cover. LDC60F AC-DC Power Supplies Open Frame/Enclosed Type LD C 60 F -1 - O Optional *4 C : with Coating G Lo w leakage current S with Chassis SN : with Chassis & co ver Y with Potentiometer R 1 2 3 4 5 6 March 13, 2019

¡DERATING CURVE¡OVERCURRENT CHARACTERISTICS (LDC60F-1) ¡RISE TIME & FALL TIME (LDC60F-1)¡STATIC CHARACTERISTICS (LDC60F-1) External view ¶ Weight: 300g max(with chassis & cover : 550g max) ¶ Tolerance: t1[t0.04] ¶ Dimensions in mm,[ ]=inches ¶ PCB Material: Glass composite(CEM3) ¶ Chassis and cover is optional. ¶ Mounting torque: 1.5N·m(16kgf·cm)max 5- f3.5 [0.14] f4.5 [0.18] 83 [3.27] 92 [3.62] 46 [1.81] [0.91] 185 [7.28] 210 [8.27] 40.75 [1.60] PCB t=1.6 [0.06] 4 [0.16] 4.5 [0.18] 4.5 [0.18] 3max [0.12] 4 [0.16] [0.43] [0.75] [1.50] [0.28] 7 [0.28] [1.22] 2-f4.5 [0.18] [0.31] 39±0.5 [1.54] 75±0.5 [2.95] 111±0.5 [4.37] 177±0.5 [6.97] 195±0.5 [7.68] 195±0.5 [7.68] 30±0.5 [1.18] [0.83] 50±0.5 [1.97] Performance data LDC60F March 13, 2019 Powered by TCPDF (www.tcpdf.org)