LCW200 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- 200W convection cooled
- Active PFC
- Integrated connector cover
- ITE & industrial approvals
- Class B conducted & radiated emissions
- Input voltage range 85-305VAC
- Regulated single outputs from 5.0V to 48VDC
- Output voltage trim
- Efficiency to 90%
- Short circuit, overvoltage & overload protection
- Conformal coating option
- -30°C to +70°C operating temperature
- 3 year warranty Industrial Electronics Instrumentation TechnologyRobotics
Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage - Operating 85 115/230 305 VAC Derate output power linearly from 100% at 100VAC to 80% at 85VAC. LCW200PS05 derate output power linearly from 100% at 115VAC to 60% at 85VAC 120 430 VDC Alternative input. Not to be used in addition to AC input. DC input not included in safety approvals, external DC rated fuse required. Derate output power linearly from 100% at 120VDC to 80% at 100VDC. LCW200PS05 derate output power linearly from 100% at 160VDC to 50% at 120VDC Input Frequency 47 50/60 63 Hz Power Factor 0.98 115VAC at full load 0.95 230VAC at full load Input Current - Full Load 2.5 3.0 A 115VAC 1.3 2.0 230VAC No Load Input Power 0.5 W Inrush Current A 115VAC cold start at 25°C ambient 65 230VAC cold start at 25°C ambient Earth Leakage Current 2.0 mA 277VAC/50Hz (T yp) Input Protection T6.3A/300VAC Internal fuse fitted in line Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 4.5 50.4 VDC See Models & Ratings table Initial Set Accuracy LCW200PS05, full load ±1 All other models, full load Voltage Adjustment ±10 LCW200PS05 max value ±5 All other models Minimum Load 0 A No minimum load required Start Up Delay 250 400 ms 115/230VAC full load Hold Up Time ms LCW200PS05 115/230VAC
12 All other models
Line Regulation ±0.5 % 100-264VAC, full load Load Regulation LCW200PS05 0-100% load ±0.5 All other models Transient Response 10 % Recovery within 1% in less than 5ms for a 50-75% and 75-50% load step Ripple & Noise mV pk-pk See Models & Ratings table Over/Undershoot 10 % Full load 5ms recovery Overvoltage Protection 7. 0 VDC LCW200PS05 Auto recovery, hiccup mode
16.2 LCW200PS12
21.8 LCW200PS15
32.4 LCW200PS24
60.0 LCW200PS48
LCW200PS05 Nominal output current, auto recovery hiccup mode105 200 All other models Temperature Coefficient ±0.03 %/°C Short Circuit Protection Continuous, hiccup with auto recovery
Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 88 % 230VAC Full load (see Models & Ratings table) Isolation: Input to Output Input to Ground Output to Ground
4000 VAC
Class I construction, 60s test with leakage current <10mA2000 VAC
500 VAC
Switching Frequency 65 kHz Power Density 4.42 W/in3 LCW200PS05
6.16 All other models
Mean Time Between Failure 250 khrs MIL-HDBK-217F , 25°C GB Weight 1.65 (750) lb(g) LCW200PS05 1.04 (475.0) All other models Case Material Aluminium chassis with vented galvanized steel cover Conformal Coating Option Acrylic resin, UL94V-0 rated, certified (UL No. E351072), minimum 30μm coating thickness. Add suffix -E to part number Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -30 +70 °C See derating curve Overtemperature Protection Hiccup mode with auto recovery, temperature measured internally Storage Temperature -40 +85 °C Cooling Natural convection Humidity 5 90 %RH Non-condensing Operating Altitude 5000 m Derate output linearly from 2000m to 85% at 5000m Shock and Vibration T ested according to EN60068-2-27 , 10 - 500Hz, 5g (1H) for each X, Y and Z plane Overtemperature Protection Hiccup mode, auto recovery EMC: Emissions Phenomenon Standard T est Level Notes & Conditions Conducted EN55032 Class B Radiated EN55032 Class B Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3
EMC: Immunity Phenomenon Standard T est Level Criteria Notes & Conditions ESD Immunity EN61000-4-2 3 A Contact ±6kV/Air ±8kV Radiated Immunity EN61000-4-3 3 A 10V/m EFT EN61000-4-4 A LCW200PS05 ±2kV
4 All other models ±4kV
A LCW200PS05 Line to line ±1kV , line to ground ±2kV Installation class 4 All other models Line to line ±2kV , line to ground ±4kV Conducted EN61000-4-6 3 A 10Vrms Dips EN61000-4-11 Dip. 100% (0VAC), 10ms A Dip. 100% (0VAC), 20ms B Dip. 60% (88VAC), 200ms A Dip. 30% (154VAC), 500ms A Dip. 20% (176VAC), 5000ms A Interruptions Int. 100% (0VAC), 5000ms B AC-DC POWER SUPPLIESLCW200 Series Safety Approvals Certification Standard Notes & Conditions UL UL62368-1 Information T echnology EN EN62368-1 Information T echnology CE Meets all applicable directives UKCA Meets all applicable legislation
AC-DC POWER SUPPLIESLCW200 Series T emperature Derating Application Notes -30 -10 10 20 30 40 45 500 Ambient temperature (°C) 100 Output power (%) 60 70-20 (12V, 15V, 24V, 48V) (5V)
‘ON’ LED V Out Adj. 2x M4x0.7 Thread - Both Sides Max. Penetration = 5mm 4x M4x0.7 Thread Max. Penetration = 3mm Pitch (Typ.) Typ. < Pin 1 < Pin 9 LCW320-C 1.181 (30.0) 8.465 (215.0) 1.868 (47.5) 1.280 (32.5) 5.906 (150.0) 2x 5.906 (150.0) 2x 1.280 (32.5) 0.323 (8.2) 0.374 (9.5) 4.528 (115.0) 1.445 (36.7) 1. All dimensions are in inches (mm). 3. General tolerances: ±0.039 (±1.00). 4. Chassis must be connected to protective earth. 5. Use 22-14 AWG wire range for connector. Notes: LCW200 Series Mechanical Details LCW200PS05 Pin-Out Pin Function 1 +Vo 2 +Vo 3 +Vo 4 -Vo 5 -Vo 6 -Vo
7 GND
8 AC(N)
9 AC(L)
Connector torque: M3.5, 0.8Nm
V Out Adj. ‘ON’ LED 2x M4x0.7 Thread - Both Sides Max. Penetration = 4mm 4x M4x0.7 Thread Max. Penetration = 4mm Typ. Pitch (Typ.) < Pin 1 < Pin 7 LCW200-C 4x 0.079 (2.0) 0.984 (25.0) 4.606 (117.0) 7.047 (179) 1.181 (30.0) 3.898 (99.0) 2x 5.906 (150.0) 2x 0.709 (18.0) 2x 1.969 (50.0) 2x 1.043 (26.5) 0.374 (9.5) 0.323 (8.2)
712 Aug 2021
- All dimensions are in inches (mm). 3. General tolerances: ±0.039 (±1.00). 4. Chassis must be connected to protective earth. 5. Use 22-14 AWG wire range for connector. Notes: Pin-Out Pin Function 1 +Vo 2 +Vo 3 -Vo 4 -Vo
5 GND
6 AC(N)/DC(-)
7 AC(L)/DC(+)
Connector torque: M3.5, 0.8Nm All other models