DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Education Lab and Training Institution Research & Design Quality Assurance Verification Full Measuring Functions with DUT V/I Monitor Wide Test Frequency 20Hz~10/5/1MHz 0.1% Basic Accuracy & 6 Digits Measurement Resolution Large LCD Display with Intuitive User Interface DC Resistance Measurement Multi Step Mode Graph Mode Standard RS-232C / GPIB Interface

FEATURES

APPLICATIONS

10MHz / 5MHz / 1MHz PRECISION LCR METER The Smarter Way to Characterize Components The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price. Pass/fail Function With Judgment Alarm In the Pass/Fail test, primary parameter measurement result is compared with user-defined limits and the pass or fail result is then displayed. Three methods, including absolute limit, percentage and delta limit, are available for Hi(high) and Lo(low) limit setting based on the nominal test value. The Pass/Fail test checks whether the parameter measurement result sits within the limits, then display "PASS" for within the limits, or "LO" for lower than the low limit, or "HI" For higher than the high limit. A scale and bar for displaying measurement result is shown at the center of the screen to give a graphical identification, which greatly reduces operator's load in a long time inspection work. This scale and bar also facilitate the adjustment of the variable components. Either Pass or Fail result can be set with a buzzer alarm, which makes component or material sorting easy with sound identification. Wide Frequency Range With Friendly Intuitive User Interface The LCR-8000G Series is designed to perform precision impedance measurements over a wide frequency range of 20Hz ~ 10MHz for LCR-8110G, 20Hz ~ 5MHz for LCR-8105G and 20Hz ~1MHz for LCR-8101G. The instrument is capable of measuring 11 different parameters with 0.1% basic accuracy, which meets the precision measurement requirements of components and modules used in the RF circuits. The large LCD display with single-layer operation menu of LCR-8000G Series provides users with ultimate convenience to plug and play without much learning time. The graph function shows the component characteristics in visual manner. Either voltage sweep or frequency sweep can be selected for horizontal scale. Just select the parameter, and set the start/stop voltage or the start/stop frequency of the sweep, LCR -8000G will run through the sequence of measurements and show the results on a graph. This graphical parameter measurement performs the characteristic verification of components and materials over the response to the changes in AC test frequency or AC test voltage without the need of complex programming of an external controller. When the graph gets out of the vertical range, the LCR- 8000G Series can automatically adjust the scale to get full test information. On the graph the marker operation is available for detailed observation. Graph Mode The Multi-Step mode is capable of running a series of measurements of a component at a number of user- defined steps in sequence automatically. Total 64 programs can be saved into the non-volatile memory, and each program contains up to 30 test steps. The parameter and Hi/Lo limits can be set respectively for each test step. After a program being properly edited, the instrument can run through all the measurement steps either at a press of the button under the Manual Trigger selection, or automatically run the program by detecting the connection of a DUT under the Auto Trigger selection. When all the test steps are completed, the screen shows the measurement reading of the parameter being selected for each step with Pass, HI, or LO measurement result. Multi Step Mode PASS/FAIL Function ( abs , % , ) with Judgment Alarm Average 1 ~ 256 Times Simply Reliable

ORDERING INFORMATION

Specifications subject to change without notice. LCR-8110G 10 MHz Precision LCR Meter LCR-8105G 5 MHz Precision LCR Meter LCR-8101G 1 MHz Precision LCR Meter ACCESSORIES OPTION FREE DOWNLOAD PC Software LCR. Exe. OPTIONAL ACCESSORIES SELECTION GUIDE BRIEF DESCRIPTIONACCESSORY MODEL LCR-8110G LCR-8105G LCR-8101G LCR-05 LCR-06B LCR-07 LCR-08 LCR-09 LCR-13 LCR-12 GTL-234 GRA-404 Test Fixture for axial & radial lead components Test Lead with Kelvin clip (4 wire type) Test Lead with Alligator clip (2 wire type) Test Lead with Kelvin clip (4 wire type) Test Fixture (Tweezers) for SMD/Chip components Test Fixture for SMD/Chip components Test Fixture for SMD/Chip components RS-232C Cable Rack Adapter Panel (19", 4U) Note " " means the accessories work with a frequency limitation (under 1MHz)： LCR-06B LCR-05 LCR-07 LCR-08 LCR-09 LCR-13 LCR-12 Test Signal Level (rms)Test Frequency Step Accuracy 10mV ~ 2V3MHz 1mV/10mV 2% 5mV ± 10mV ~ 1V> 3MHz 1mV/10mV 2% 5mV ± R, Z, X, Rdc Mode G, Y , B L C D Q 0.1m ~ 100MΩΩ 0.01m ~ 100MΩΩ Measure Range 10nS ~ 1000S 0.1nH ~ 100kH 0.01pF ~ 1F 0.00001 ~ 9.9999 0.1 ~ 9999.9 -180 ~ +180 TEST FREQUENCY INPUT IMPEDANCE BASIC ACCURACY TEST SPEED TEST SIGNAL LEVELS SHORT CIRCUIT CURRENT MEASUREMENT RANGES MEASUREMENT PARAMETERS SERIES OR PARALLEL EQUIVALENT CIRCUIT SERIES EQUIVALENT CIRCUIT ONLY PARALLEL EQUIVALENT CIRCUIT ONLY POLAR FORM LCD DISPLAY AVERAGE INTERFACE POWER SOURCE DIMENSIONS & WEIGHT 20Hz ~ 10MHz/5MHz/1MHz, 5 Digits, 0.005%± 100Ω ±0.1% (R, Z, X, G, Y , B, L, C) AC (>2kHz) - MAX: 75mS, FAST: 150mS, MEDIUM: 450mS, SLOW: 600mS DC - MAX: 30mS, FAST: 60mS, MEDIUM: 120mS, SLOW: 900mS Max. 20mA Impedance (Z), Phase Angle ( ), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc) C + R, C + D, C + Q, L + R, L + Q, L + D X + R, X + D, X + Q C + G, B + G, B + D, B + Q, B + R, L + G Z + Phase Angle, Y + Phase Angle 320 x 240 DOT-MATRIX 1 ~256 times RS-232C, GPIB 330(W) x 170(H) x 340(D)mm, Approx. 5kg AC 115V (+10%/-25%), AC 230V (+15% / -14%)(Selectable), 50/60Hz Note : Basic accuracy varies with the temperture, frequency, AC signal level and impedance of the device under test. SPECIFICATIONS User manual x 1 , Power cord x 1 , Test lead LCR-12 x 1 Opt. 02 DC Bias Box (up to 200V) DC BIAS BOX Opt. 01 GTL-251 GPIB-USB-HS(High Speed) U.S.A. Subsidiary INSTEK AMERICA CORP. 5198 Brooks Street Montclair, CA 91763, U.S.A. TF+1-909-399-3535 +1-909-399-0819 E-mail: sales@instekamerica.com Japan Subsidiary TEXIO TECHNOLOGY CORPORATION. Korea Subsidiary Room No.503, Gyeonginro 775 (Mullae-Dong 3Ga, Ace Hightech-City B/D 1Dong), Yeongduengpo-Gu, Seoul 150093, Korea. +82-2-3439-2205 +82-2-3439-2207TF E-mail : gwinstek@gwinstek.co.kr GOOD WILL INSTRUMENT KOREA CO., LTD. 7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin Yokohama, Kohoku-ku, Yokohama, Kanagawa, 222-0033 Japan +81-45-620-2305 +81-45-534-7181TF E-mail: info@texio.co.jp No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan GOOD WILL INSTRUMENT CO., LTD. Global Headquarters TF+886-2-2268-0389 +886-2-2268-0639 E-mail: marketing@goodwill.com.tw China Subsidiary E-mail: marketing@instek.com.cn Malaysia Subsidiary No. 1-3-18, Elit Avenue, Jalan Mayang Pasir 3,

11950 Bayan Baru, Penang, Malaysia

TF+604-6111122 +604-6115225 E-mail: sales@goodwill.com.my GOOD WILL INSTRUMENT (SEA) SDN. BHD. GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011 China TF+86-512-6661-7177 +86-512-6661-7277 GOOD WILL INSTRUMENT EURO B.V. De Run 5427A, 5504DG Veldhoven, THE NETHERLANDS TF+31(0)40-2557790 +31(0)40-2541194 Europe Subsidiary Simply Reliable www.gwinstek.com www.facebook.com/GWInstek