LCL150_14 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- SingleOu tputIndustrialSupplies
- High Efficiency
- Low Co st
- 150 W Co nvectionCooled
- 300 W & 500 W with InternalFans
- Ou tputsfrom 12 V to48 V
- 3 YearWa rranty LCL Series Input InputVoltage • 85-264 VAC (127-370 VDC) (see note 1) InputFrequency • 47-63 Hz InputCurrent • 2.1 A max for LCL150, 4.5 A max for LCL300, 6.6 A max for LCL500 InrushCurrent • 40 A max for LCL150,
60 A max for LCL300 & 500
cold start at 25 °C, 230 VAC Power Factor • >0.9 EarthLeakage Current • <2 mA at 264 VAC, 60 Hz InputProtection • LCL150: T3.15 A/250 V, LCL300: T6.3A/250 V, LCL500: T10A/250 V, internal fuse fitted in line Output Output Voltage • See tables Output VoltageTrim • See tables InitialSet Accuracy • ±100 mV at 50% load Minimum Load • None required StartUp Delay • 2 s max for LCL150, 1.5 s max for LCL300 , 0.8 s max for LCL500 StartUp RiseTime • 50 ms max for LCL150, 35 ms max for LCL300 & LCL500 Hold Up Time • 10 ms min at 115 VAC and full load LineRegulation • ±0.5% max for LCL150, ±0.3% for LCL300 & LCL500 Load Regulation • ±1% max TransientResponse • 4% max deviation recovery to within 1% in 500 µs for a 50% load change Ripple& Noise • See tables OvervoltageProtection • 110-140%, recycle input to reset Overtemperature • Output turns off when OTP triggered, Protection measured internally, auto recovery OverloadProtection • 110-150% of rated output power. Delayed by 1 s min to allow for peak loads. ShortCircuitProtection • Trip and restart (hiccup mode), auto recovery Remote Sense • Fitted to LCL500 only, compensates for
0.25 V max each line
Remote On/Off • Fitted on LCL500 only, On = logic low or open circuit, Off = logic high xppow er.com Ge neral Efficiency • 88% typical at full load & 230 VAC Isolation • 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
SwitchingFrequency • 90-110kHz main converter& 45-190kHz PFC for LCL150,80-190kHz main converter & 62-65 kHz PFC for LCL300 & 500 Power Density • 2.7 W/in 3 LCL150, 4.4 W/in 3 LCL300,
4.9 W/in 3 LCL500
MTBF • LCL150: >489 kHrs, LCL300: >235 kHrs, LCL500: >211 kHrs to MIL-HBK-217F at 25 °C, GB Environm ental OperatingTemperature • -10 °C to +70 °C, derate from 100% load at 50 °C to 50% load at 70 °C Cooling • LCL150 convection cooled, LCL300 & LCL500 have internal fans OperatingHumidity • 5% to 90% non condensing StorageTemperature • -40 °C to +85 °C OperatingAltitude • 3000 m Vibration • 10-500 Hz, 2 g, 10 mins per cycle on 3 axes EMC & Safety Emissions • EN55022 level B conducted, level A radiated Harmonic Currents • EN61000-3-2 class A LCL150:EN61000-3-2classC forloads≥40% LCL300 & LCL500: EN61000-3-2 class C for loads ≥20% VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±4 kV contact, ±8 kV air discharge, Performance Criteria A RadiatedImmunity • EN61000-4-3, level 2 Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A Conducted Immunity • EN61000-4-6, level 2 Perf Criteria A Magnetic Field • EN61000-4-8, 1 A/m Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B SafetyApprovals • EN60950-1, UL60950-1, CSA60950 No 22.2
- O utputpow erderateslinearly from 100% at90 VAC to 90% at85 VAC. 2. M easuredw ith20 MH z bandwidth. Output Power (1) Output Voltage Trim Range Output Current Ripple& Noise (2) Model Number 150 W 12.0 V 11.0-13.0 V 12.5 A 100 mV pk-pk LCL150PS12 13.5 V 12.5-14.5 V 11.1 A 100 mV pk-pk LCL150PS13 15.0 V 14.0-16.0 V 10.0 A 100 mV pk-pk LCL150PS15 24.0 V 23.0-25.0 V 6.3 A 150 mV pk-pk LCL150PS24 27.0 V 26.0-28.0 V 5.6 A 150 mV pk-pk LCL150PS27 48.0 V 47.0-49.0 V 3.1 A 250 mV pk-pk LCL150PS48 Output Power (%) Ambient Temperature (°C) 0 10 -10 20 30 40 50 60 70 100 Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 Notes 1.02 (26.0) 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 1.97 (50.0) 0.90 (23.0) 0.57 (14.5) 4.64 (118.0) 0.57 (14.5) 0.90 (23.0) 4.64 (118.0) 1.02 (26.0) 7 .55 (192.0) T erminal Block, M4 Screw 7 pins 0.37 (9.5) centre 3.74 (95.0) 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 2 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration Pin Function 1 +Vout 2 +Vout 3 -Vout 4 -Vout
5 Ground
6 Neutral
7 Line
- All dimensions shown in inches (mm). 2. Weight: 1.39 lbs (630 g) approx. 3. Tolerance is ±0.05 (±0.2) maximum.
AC-DC LCL300 M odeland Ratings Mec hanicalDetails DeratingCurves 1. O utputpow erderates linearly from 100% at90 VAC to90% at85 VAC. 2. Mea suredwith20 M H z bandwidth. Output Power (1) Output Voltage Trim Range Output Current Ripple& Noise (2) Model Number 300 W 12.0 V 11.0-13.0 V 25.0 A 150 mV pk-pk LCL300PS12 13.5 V 12.5-14.5 V 22.0 A 150 mV pk-pk LCL300PS13 15.0 V 14.0-16.0 V 20.0 A 150 mV pk-pk LCL300PS15 310 W 24.0 V 23.0-25.0 V 13.0 A 150 mV pk-pk LCL300PS24 315 W 27.0 V 26.0-28.0 V 11.7 A 200 mV pk-pk LCL300PS27 320 W 48.0 V 47.0-49.0 V 6.70 A 240 mV pk-pk LCL300PS48 Output Power (%) Ambient Temperature (°C) 100 0 10 -10 20 30 40 50 60 70 Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 Notes 1. All dimensions shown in inches (mm 2. Weight: 1.94 lbs (880 g) approx. 3. Tolerance is ±0.05 (±0.2) maximum. 4. Airflow direction is out of the unit at fan. Notes 1.97 (50.0) 0.63 (16.0) 8.07 (205.0) 1.97 (50.0) 0.94 (24.0) 0.63 (16.0) 6.81 (173.0) 6.81 (173.0) 1.97 (50.0) 0.98 (25.0) 0.50 (12.5) 4.33 (110.0) 7 .44 (189.0) T erminal Block, M4 Screw 9 pins 0.37 (9.5) centre 3 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 3 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration J1 PinConnections Pin Function 1 +Vout 2 +Vout 3 +Vout 4 -Vout 5 -Vout 6 -Vout
7 Ground
8 Neutral
9 Line
Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 Mec hanicalDetails 1. O utputpow erderateslinearly from 100% at90 VAC to 90% at85 VAC. 2. M easuredw ith20 MH z bandwidth. Output Power (1) Output Voltage Trim Range Output Current Ripple& Noise (2) Model Number 500 W 12.0 V 11.0-13.0 V 42.0 A 120 mV pk-pk LCL500PS12 13.5 V 12.5-14.5 V 37.0 A 150 mV pk-pk LCL500PS13 15.0 V 14.0-16.0 V 34.0 A 150 mV pk-pk LCL500PS15 24.0 V 23.0-25.0 V 21.0 A 150 mV pk-pk LCL500PS24 27.0 V 26.0-28.0 V 18.5 A 150 mV pk-pk LCL500PS27 48.0 V 47.0-49.0 V 10.5 A 240 mV pk-pk LCL500PS48 † Output Power (%) Ambient Temperature (°C) 100 0 10 -10 20 30 40 50 60 70 Notes 1.Dimensions shown in inches (mm). 2. Weight: 3.2 lbs (1.45 kg) approx. 3. Tolerance is ±0.05 (±0.2) maximum. Applying >4.5 V to Pin 2 with respect to Pin 1 turns output off. Applying <0.8 V to Pin 2 with respect to Pin 1 or open circuit turns output on. Mating Connectors (J2): WST P4-I25002 housing WST I25002BS contacts Notes 1.41 (36.0) 2.08 (53.0) 0.60 (15.0) 1.00 (25.5) 5.00 (127 .0) 9.21 (234.0) 9.84 (250.0) (15.0) 1.00 (25.5) 1.41 (0.36) (36.0) 3.54 (90.0) T erminal Block, M4 Screw 9 pins 0.37 (9.5) centre AIRFLOW 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration 4 x M4 x 0.7 THD 0.15 (3.8) Max Screw Penetration J1 PinConnections Pin Function 1 +Vout 2 +Vout 3 +Vout 4 -Vout 5 -Vout 6 -Vout