LCB716 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Description

Ordering Information

Switching Characteristics of Normally Closed (Form B) Devices LCB716 is a 1-Form-B solid state relay that uses optically coupled relay technology to provide an enhanced 3750V rms isolation barrier between the input and the output of the relay. The efficient MOSFET switches use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED.  Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (gas, oil, electric and water)  Medical Equipment-Patient/Equipment Isolation  Security  Aerospace  Industrial Controls  UL Recognized Component: File # E76270  Small 6-Pin DIP Package  Low Drive Power Requirements (TTL/CMOS Compatible)  No Moving Parts  High Reliability  Arc-Free With No Snubbing Circuits  3750Vrms Input/Output Isolation  No EMI/RFI Generation  Machine Insertable, Wave Solderable  Tape & Reel, Surface Mount Version Available CONTROL 10% 90% TONTOFF ILOAD + Control – Control Do Not Use Load Do Not Use Load AC/DC Configuration + Control – Control Do Not Use + Load – Load DC Only Configuration

www.clare.com2 LCB716 R01 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current AC/DC Configuration, Continuous - IL - - 500 mA DC Configuration, Continuous - - - 1000 Peak t < 10ms I LPK - - 1.2 A On-Resistance IL=500mA - 1.63 2 AC/DC Configuration RON Ω DC Configuration I L=1000mA - 0.4 0.5 Off-State Leakage Current I F=2mA, VL=60V ILEAK --1 μA Output Capacitance I F=2mA, 50V , f=1MHz C OUT - 280 - pF Switching Speeds T urn-On tON - 0.58 3IF=5mA, VL=10V ms T urn-Off t OFF - 0.76 3 Input Characteristics @ 25°C Input Control Current I L=500mA I F --2 m A Input Dropout Current - I F 0.1 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Current V R=5V I R -- 1 0 μA Common Characteristics @ 25°C Capacitance, Input to Output - C I/O -3- p F Parameter Ratings Units Blocking Voltage 60 V P Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA Input Power Dissipation 1 100 mW T otal Power Dissipation 2 800 mW Isolation Voltage, Input to Output 3750 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Electrical absolute maximum ratings are at 25°C Absolute Maximum Ratings

Electrical Characteristics

www.clare.com 3R01 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage Drop (V) Device Count (N) Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) On-Resistance (Ω) Device Count (N) Typical On-Resistance (N=50, TA=25ºC, IL=5mA, IF=0mA) Blocking Voltage (VP) 75 76 77 78 79 80 Device Count (N) Typical Blocking Voltage (N=50, TA=25ºC, IF=2mA) LED Forward Current (mA) Device Count (N) Typical IF for Switch Operation (N=50, TA=25ºC, IL=200mA) Turn-On Time (ms) Device Count (N) Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) Turn-Off Time (ms) Device Count (N) Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (A) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 Typical Load Current vs. Temperature (IF=0mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 100 150 200 250 300 350 Typical Leakage vs.Temperature Measured Across Pins 7&8 (IF=5mA, VL=60V) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) Typical Blocking Voltage vs. Temperature (IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (μs) 100 200 300 400 500 600 700 800 Typical Turn-On vs. Temperature (IL=100mA) IF=2mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (ms) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Typical Turn-Off vs. Temperature (IL=100mA) IF=2mA IF=5mA LED Forward Current (mA) 0 1 02 0 3 04 05 0 Turn-On Time (μs) 417 418 419 420 421 422 423 Typical Turn-On vs. LED Forward Current (IL=100mA)

www.clare.com4 LCB716 R01 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Current (ma) 0 1 02 0 3 04 05 0 Turn-Off Time (ms) 0.5 1.0 1.5 2.0 2.5 Typical Turn-Off vs. LED Forward Current (IL=100mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (Ω) 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Typical On-Resistance vs. Temperature (IL=100mA, IF=0mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Current (mA) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Typical IF for Switch Operation vs. Temperature (IL=100mA) Time 10μs 100 μs 1ms 10ms 100ms 1s 10s 100s Load Current (A) 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1-Form-B Relay Energy Rating Curve Load Voltage (V) Load Current (A) -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 Typical Load Voltage vs. Load Current (TA=25ºC, IF=0mA)

www.clare.com 5R01 MECHANICAL DIMENSIONS Manufacturing Information RoHS 2002/95/EC e3Pb Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. 6.350 ± 0.127 (0.250 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 5.080 ± 0.127 (0.200 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 6-Pin DIP Thru-Hole Package PC Board Pattern

0.254 TYP

(0.010 TYP) 9.144 ± 0.508 (0.360 ± 0.020)

7.239 TYP

(0.285 TYP) 7.620 ± 0.254 (0.300 ± 0.010) 3.302 ± 0.051 (0.130 ± 0.002)

4.064 TYP

(0.160 TYP) 0.457 ± 0.076 (0.018 ± 0.003) Dimensions mm (inches) 8.382 ± 0.381 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 1.651 ± 0.254 (0.065 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 7.620 ± 0.254 (0.300 ± 0.010) 0.635 ± 0.127 (0.025 ± 0.005) 6-Pin Surface Mount Package (”S” Suffix) Recommended PCB Land Pattern Dimensions mm (inches) 3.302 ± 0.051 (0.130 ± 0.002) 4.445 ± 0.254 (0.175 ± 0.010) 2.54 (0.10) 8.90 (0.3503)1.65 (0.0649) 0.65 (0.0255) 8.382 ± 0.381 (0.100 ± 0.005) 9.524 ± 0.508 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 1.651 ± 0.254 (0.065 ± 0.010)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Exce pt as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCB716-R01 ©Copyright 2008, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/30/08 For additional information please visit our website at: www.clare.com LCB716 MECHANICAL DIMENSIONS W = 16.00 MAX (0.63 MAX) B0 = 10.10 (0.400) A0 = 10.10 (0.400) P = 12.00 (0.472) K1 = 3.80 (0.15) K0 = 4.90 (0.19) Top Cover Tape User Direction of Feed NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Dimensions mm (inches) Embossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) Tape and Reel Packaging for 6-Pin “S” Suffix Parts