LCA125

LCA125 CLARE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Description

Single Pole OptoMOS® Relay

Ordering Information

Part # Description LCA125 6 Pin DIP (50/Tube) LCA125S 6 Pin Surface Mount (50/Tube) LCA125STR 6 Pin Surface Mount (1000/Reel) LCA125 Units Load Voltage 300 V Load Current 170 mA Max RON 16 Ω Pin Configuration /K43/K4F/K4E/K54/K52/K4F/K4C /K4C/K4F/K41/K44 /K31/K30/K6D/K73 /K31/K30/K25 /K31/K30/K25 /K39/K30/K25 /K2B /K54 /K4F/K4E /K54 /K4F/K46/K46 /K2B /K2B + Control – Control Do Not Use Load Do Not Use Load AC/DC Configuration LCA125/LCA125L Pinout + Control – Control Do Not Use + Load – Load DC Only Configuration LCA125/125L Pinout Switching Characteristics of Normally Open (Form A) Devices

www.clare.com LCA125 Rev. 8 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Power Dissipation - - 800 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C

Electrical Characteristics

Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Voltage (Peak) - V L - - 300 V Load Current (Continuous) AC/DC Configuration - I L - - 170 mA DC Configuration - I L - - 300 mA Peak Load Current 10ms I L - - 400 mA On-Resistance AC/DC Configuration I L=170mA R ON -1 0 1 6 Ω DC Configuration I L=300mA R ON -4 5 Ω Off-State Leakage Current V L=300V I LEAK -- 1 µ A Switching Speeds Turn-On I F=5mA, VL=10V T ON -- 5 m s Turn-Off I F=5mA, vL=10V T OFF -- 5 m s Output Capacitance 50V; f=1MHz C OUT - 50 - -pF Input Characteristics @ 25°C Input Control Current I L=170mA I F 5- 5 0m A Input Dropout Current - - 0.4 0.7 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R -- 5 V Reverse Input Current V R=5V I R - - 10 µA Input to Output Capacitance - C I/O -3 - p F Input to Output Isolation - V I/O 3750 - - V RMS

www.clare.comRev. 8 PERFORMANCE DATA* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. LCA125 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC LED Forward Voltage (V) Device Count (N) LCA125 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) On-Resistance (Ω ) Device Count (N) LCA125 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Blocking Voltage (V) Device Count (N) LCA125 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) LED Current (mA) Device Count (N) LCA125 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC LED Current (mA) Device Count (N) LCA125 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) Turn-On (ms) Device Count (N) LCA125 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) Turn-Off (ms) Device Count (N) LCA125 Typical Load Current vs. Temperature Temperature (°C) Load Current (mA) 300 250 200 150 100 -40 -20 0 20 40 60 80 120 100 20mA 10mA 5mA LCA125 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Temperature (°C) Leakage (µA) -40 0.100 0.090 0.080 0.070 0.060 0.050 0.040 0.030 0.020 0.010 -20 0 20 40 60 80 100 LCA125 Typical Blocking Voltage vs. Temperature Temperature (°C) Blocking Voltage (VRMS ) -40 340 335 330 325 320 315 310 305 -20 0 20 40 60 80 100 LCA125 Typical Turn-On vs. Temperature (Load Current = 170mADC) Temperature (°C) 5mA 10mA 20mA Turn-On (ms) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 LCA125 Typical Turn-Off vs. Temperature (Load Current = 170mADC) Temperature (°C) Turn-Off (ms) -40 0.300 0.250 0.200 0.150 0.100 0.050 -20 0 20 40 60 80 100 5mA

www.clare.com4 LCA125 Rev. 8 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. LCA125 Typical IF for Switch Dropout vs. Temperature (Load Current = 170mADC) Temperature (°C) Current (mA) -40 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 -20 0 20 40 60 80 100 LCA125 Typical Turn-Off vs. LED Forward Current (Load Current = 170mADC) LED Forward Current (mA) Turn-Off (ms) 0 5 1 01 52 02 53 03 54 04 5 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 LCA125 Typical Turn-On vs. LED Forward Current (Load Current = 170mADC) LED Forward Current (mA) Turn-On (ms) 0 5 1 01 52 02 53 03 54 04 5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 LCA125 Typical On-Resistance vs. Temperature (Load Current = 170mADC; IF = 5mADC) Temperature (°C) On-Resistance (Ω ) -40 60.000 50.000 40.000 30.000 20.000 10.000 -20 0 20 40 60 80 100 LCA125 Typical IF for Switch Operation vs. Temperature (Load Current = 170mADC) Temperature (°C) LED Current (mA) -40 1.800 1.600 1.400 1.200 1.000 0.800 0.600 0.400 0.200 -20 0 20 40 60 80 100 LCA125 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC Load Voltage (V) Load Current (mA) 200 150 100 -50 -100 -150 -200 LCA125 Energy Rating Curve Time Load Current (A) 1.2 1.0 0.8 0.6 0.4 0.2 10µs 1ms 100ms 10s100µs 10ms 1s 100s LCA125 Typical LED Forward Voltage Drop vs. Temperature Temperature (°C) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 50mA 30mA 20mA 10mA 5mA

www.clare.com 5Rev. 8 Dimensions mm (inches) Mechanical Dimensions PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005) 4.445 ± .127 (.175 ± .005) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) .457 ± .076 (.018 ± .003) .254 TYP. (.010) .635 TYP. (.025)

6 Pin DIP Surface Mount (“S” Suffix)

Tape and Reel Packaging for 6 Pin Surface Mount Package 7.493 ± .102 (.295 ± .004) 12.090 (.476) 330.2 DIA. (.069 ± .004) 3.987 ± .102 (.157 ± .004) 1.498 ± .102 (.265) .406 MAX. (.016) 4.877 (.192) Top Cover Tape 2.007 ± .102 (.079 ± .004) 11.989 ± .102 (.472 ± .004) User Direction of Feed .050R TYP. 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossment Embossed Carrier Top Cover Tape Thickness .102 MAX. (.004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) PC Board Pattern (Top View) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 6-.800 DIA. (6-.031 DIA.) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.144 (.360) .457 ± .076 (.018 ± .003)

6 Pin DIP Through Hole (Standard)

7.239 TYP. (.285) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 9.144 ± .508 (.360 ± .020)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup- port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCA125 -R8.0 ©Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 7/10/02 For additional information please visit our website at: www.clare.com