LC7500M SANYO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
= Unrecorded area sense unit and 3-musical piece = {nitialization circuit to be used at the time of cuing logic unit are built in. application of power supply is built in.* ® Unrecorded area sense time and recorded area + For LC7510, no musical piece programmed sense time are set independently by external mode is initialized. CR, so that stable operation is made possible + For LC7512, preceding or following 1 against pulse noise in unrecorded area and musical piece programmed mode is sound cut in recorded area. initialized, = For programming the number of musical pieces . . | to be cued, 2 methods are available as follows: = For LC7512, itis possible to automatically re- + Direct set (Using 3 switches) program preceding or following 1 musical piece + Serial set (Using 1 switch) immediately after cuing. _ Therefore, preceding = For drive output of plunger which locks FF (or or following 1 musical piece can be cued only REW) lever while cuing, 2 types are available as by operating FF (or REW) lever. follows. These are capable of meeting 2 kinds ® Input sensitivity is 250mV (typ.) of deck mechanism. = It is possible to direct drive LED (red or + Plunger on while cuing _ ' green) for displaying the number of prog- Cuing } Play rammed musical pieces. TL ® Wide operating supply voltage range (Vpp=4.0 n to 11.0V) + Plunger off while cuing