LC4966

LC4966 SANYO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

The LC4966 is an IC that provides the same functions as the MLC4066B and the MLC4066BH over an expanded usable voltage range. The LC4966 provides four bidirectional switch circuits. These circuits form a low- impedance conducting path between the input and output sides when the corresponding control input (CONT) is set high, and form a high-impedance nonconducting open circuit when the control input is set low. Package Dimensions unit: mm 3003A-DIP14 CMOS LSI 42696HA (OT) No. 1536-1/6 SANYO: DIP14 [LC4966] SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN Quad Bilateral Switch LC4966 Specifications Absolute Maximum Ratings at Ta = 25°C, VSS = 0 V Allowable Operating Ranges at Ta = –40 to +85°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage V DD max V SS – 0.5 to VSS + 40 V Input voltage V IN VSS – 0.5 to VDD + 0.5 V Output voltage V OUT VSS – 0.5 to VDD + 0.5 V Input current I IN ±10 mA Potential difference between input and VI-VO ±0.5 Voutput when on Lead soldering temperature time T sol t = 10 s 260 °C Allowable power dissipation Pd max Ta ≤ 85°C, IIN = ±10 mA 300 mW Operating temperature Topr –40 to +85 °C Storage temperature Tstg –65 to +150 °C Parameter Symbol Conditions Ratings Unit Supply voltage V DD 3 to 37 V Input voltage V IN 0 to VDD V

No. 1536-2/6 LC4966 Equivalent Circuit (1/4 LC4966) Pin Assignment and Equivalent Circuit Block Diagram Electrical Characteristics at Ta = 25 ± 2°C, VSS = 0 V Parameter Symbol Conditions min typ max Unit VDD = 5 V, 3.5 Vfor a current between input and output > 10 µA VDD = 10 V, 8.0 Vfor a current between input and output > 10 µA VDD = 15 V, 12.5 V Input high-level control voltageVIH for a current between input and output > 10 µA VDD = 20 V, 17.0 Vfor a current between input and output > 10 µA VDD = 30 V, 27.0 Vfor a current between input and output > 10 µA VDD = 37 V, 34.0 Vfor a current between input and output > 10 µA VDD = 5 V, 1.0 Vfor a current between input and output < 10 µA VDD = 10 V, 2.0 Vfor a current between input and output < 10 µA VDD = 15 V, 2.5 V Input low-level control voltage VIL for a current between input and output < 10 µA VDD = 20 V, 2.5 Vfor a current between input and output < 10 µA VDD = 30 V, 3.0 Vfor a current between input and output < 10 µA VDD = 37 V, 3.0 Vfor a current between input and output < 10 µA Continued on next page.

No. 1536-3/6 LC4966 Continued from preceding page. Parameter Symbol Conditions min typ max Unit VDD = 5 V, VIN = 5 V, I = ±1 mA 110 220 Ω VDD = 5 V, VIN = 2.5 V, I = ±1 mA 90 180 Ω VDD = 5 V, VIN = 0.25 V, I = ±1 mA 110 220 Ω VDD = 10 V, VIN = 10 V, I = ±3 mA 70 140 Ω VDD = 10 V, VIN = 5 V, I = ±3 mA 50 100 Ω VDD = 10 V, VIN = 0.25 V, I = ±3 mA 70 140 Ω VDD = 15 V, VIN = 15 V, I = ±3 mA 60 120 Ω VDD = 15 V, VIN = 7.5 V, I = ±3 mA 40 80 Ω VDD = 15 V, VIN = 0.25 V, I = ±3 mA 60 120 Ω VDD = 20 V, VIN = 20 V, I = ±3 mA 60 120 Ω VDD = 20 V, VIN = 10 V, I = ±3 mA 40 80 Ω VDD = 20 V, VIN = 0.25 V, I = ±3 mA 60 120 Ω VDD = 30 V, VIN = 30 V, I = ±3 mA 50 100 Ω VDD = 30 V, VIN = 15 V, I = ±3 mA 35 70 Ω VDD = 30 V, VIN = 0.25 V, I = ±3 mA 50 100 Ω VDD = 37 V, VIN = 37 V, I = ±3 mA 45 90 Ω On resistance R ON VDD = 37 V, VIN = 19 V, I = ±3 mA 30 60 Ω VDD = 37 V, VIN = 0.25 V, I = ±3 mA 45 90 Ω VDD = +5 V, VIN = –5 V, VIN = 5 V, I = ±3 mA 70 140 Ω VDD = +5 V, VSS = –5 V, VIN = ±0.25 V, I = ±3 mA 50 100 Ω VDD = +5 V, VSS = –5 V, VIN = –5 V, I = ±3 mA 70 140 Ω VDD = +7.5 V, VSS = –7.5 V, VIN = 5 V, I = ±3 mA 60 120 Ω VDD = +7.5 V, VSS = –7.5 V, VIN = ±0.25 V, I = ±3 mA 40 80 Ω VDD = +7.5 V, VSS = –7.5 V, VIN = –5 V, I = ±3 mA 60 120 Ω VDD = +10 V, VSS = –10 V, VIN = 10 V, I = ±3 mA 60 120 Ω VDD = +10 V, VSS = –10 V, VIN = ±0.25 V, I = ±3 mA 40 80 Ω VDD = +10 V, VSS = –10 V, VIN = –10 V, I = ±3 mA 60 120 Ω VDD = +15 V, VSS = –15 V, VIN = 15 V, I = ±3 mA 50 100 Ω VDD = +15 V, VSS = –15 V, VIN = ±0.25 V, I = ±3 mA 35 70 Ω VDD = +15 V, VSS = –15 V, VIN = –15 V, I = ±3 mA 50 100 Ω VDD = +18.5 V, VSS = –18.5 V, VIN = 18.5 V, I = ±3 mA 45 90 Ω VDD = +18.5 V, VSS = –18.5 V, VIN = ±0.25 V, I = ±3 mA 30 60 Ω VDD = +18.5 V, VSS = –18.5 V, VIN = –18.5 V, I = ±3 mA 45 90 Ω Input off leakage current IOFF VDD = 37 V, VIN = 37 V, VOUT = 0 V ±1 ±500 nA VDD = 37 V, VIN = 0 V, VOUT = 37 V ±1 ±500 nA VDD = 5 V 0.001 1 µA VDD = 10 V 0.001 2 µA VDD = 15 V 0.002 4 µA Quiescent current drain IDD VDD = 20 V 0.004 8 µA VDD = 25 V 0.01 20 µA VDD = 30 V 0.02 40 µA VDD = 35 V 0.04 80 µA VDD = 37 V 0.1 160 µA Input high-level control currentIIH VDD = 37 V, VIN = 37 V 10–4 3 µA Input low-level control current IIL VDD = 37 V, VIN = 0 V –10–4 3 µA Input capacitance C IN Control inputs 5 7.5 pF Switch input and outputs 10 pF

No. 1536-4/6 LC4966 Switching Characteristics at Ta = 25 ± 2°C Note 1. Vis is a ±2.5 Vp-p sine wave; fmax: 20log (Vos/Vis) = the –3 dB frequency. 2. Vis is a ±2.5 Vp-p sine wave. 3. Vis is a ±2.5 Vp-p sine wave. Frequency (feedthrough): 20log(Vos/Vis) = –50 dB Parameter Symbol Conditions min typ max Unit VDD = 5 V, RL = 10 kΩ , CL = 50 pF 15 45 ns VDD = 10 V, RL = 10 kΩ , CL = 50 pF 10 30 ns VDD = 15 V, RL = 10 kΩ , CL = 50 pF 8 25 ns Transmission time (IN to OUT)tPLH , tPHL VDD = 20 V, RL = 10 kΩ , CL = 50 pF 8 25 ns VDD = 25 V, RL = 10 kΩ , CL = 50 pF 8 25 ns VDD = 30 V, RL = 10 kΩ , CL = 50 pF 7 25 ns VDD = 35 V, RL = 10 kΩ , CL = 50 pF 7 25 ns VDD = 37 V, RL = 10 kΩ , CL = 50 pF 7 25 ns VDD = 5 V, RL = 10 kΩ , CL = 50 pF 100 200 ns VDD = 10 V, RL = 10 kΩ , CL = 50 pF 40 70 ns VDD = 15 V, RL = 10 kΩ , CL = 50 pF 35 60 ns Transmission time tPLH , tPHL VDD = 20 V, RL = 10 kΩ , CL = 50 pF 35 60 ns (control fi OUT) VDD = 25 V, RL = 10 kΩ , CL = 50 pF 35 60 ns VDD = 30 V, RL = 10 kΩ , CL = 50 pF 35 60 ns VDD = 35 V, RL = 10 kΩ , CL = 50 pF 35 60 ns VDD = 37 V, RL = 10 kΩ , CL = 50 pF 35 60 ns VDD = 5 V, CL = 15 pF 1.0 MHz VDD = 10 V, CL = 15 pF 1.0 MHz Maximum control input frequencyf max (c) VDD = 20 V, CL = 15 pF 1.0 MHz VDD = 30 V, CL = 15 pF 1.0 MHz VDD = 37 V, CL = 15 pF 1.0 MHz VDD = +5 V, VSS = –5 V, RL = 10 kΩ , CL = 15 pF*1 35 MHz Maximum transmission frequencyf max (I-O) VDD = +10 V, VSS = –10 V 40 MHz VDD = +15 V, VSS = –15 V 50 MHz VDD = +18.5 V, VSS = –18.5 V 50 MHz VDD = +5 V, VSS = –5 V, RL = 10 kΩ , f = 1 kHz*2 0.010 % Sine wave total harmonic VDD = +10 V, VSS = –10 V 0.005 % distortion VDD = +15 V, VSS = –15 V 0.005 % VDD = +18.5 V, VSS = –18.5 V 0.005 % VDD = +5 V, VSS = –5 V, RL = 10 kΩ *3 1 MHz Feedthrough (switch off state) VDD = +10 V, VSS = –10 V 1 MHz VDD = +15 V, VSS = –15 V 1 MHz VDD = +18.5 V, VSS = –18.5 V 1 MHz

No. 1536-5/6 LC4966 Test Circuits and Waveforms Unit (resistance: Ω , capacitance: F) 1. tPLH , tPHL (IN-OUT) Test Circuit 2. tPLH , tPHL (Control-OUT) Test Circuit 3. R ON Test Circuit 4. Feedthrough Test Circuit 5. Crosstalk 6. Frequency Response (f max) and Total Harmonic Distortion

No. 1536-6/6 LC4966 This catalog provides information as of December, 1997. Specifications and information herein are subject to change without notice. n No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. n Anyone purchasing any products described or contained herein for an above-mentioned use shall: À Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: \` Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. n Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.