LBA716 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

Description

Ordering Information

Switching Characteristics of Normally Open (Form A) Devices Switching Characteristics of Normally Closed (Form B) Devices LBA716 is 60V, 1A, 0.4Ω dual Solid State Relay integrating independent 1-Form-A and 1-Form-B relays into a single package. It features a superior combination of low on-resistance and enhanced peak load current (5A max.) handling capability.  Telecommunications  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Utility Meters (gas, oil, electric and water)  Medical Equipment-Patient/Equipment Isolation  Security  Aerospace  Industrial Controls  UL Recognized Component: File # E76270  CSA Certified Component: Certificate # 1175739  EN/IEC 60950-1 Compliant  100% Solid State  Small 8-Pin Package  Low Drive Power Requirements (TTL/CMOS Compatible)  Arc-Free With No Snubbing Circuits  3750Vrms Input/Output Isolation  No EMI/RFI Generation  Machine Insertable, Wave Solderable  Surface Mount Versions  Tape & Reel available + Control - Normally Closed – Control - Normally Closed + Control - Normally Open – Control - Normally Open Normally Closed Normally Open CONTROL 10% 90% TONTOFF ILOAD CONTROL ILOAD 10% 90% TON TOFF

www.clare.com2 LBA716 R01 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Form-A (Normally Open) Characteristics Load Current Continuous -I L --1 A Peak t < 10ms I LPK --5 On-resistance I L=1A R ON - 0.21 0.4 Ω Off-State Leakage Current V L=60V I LEAK --1 μA Output Capacitance 50V , f=1MHz C OUT - 105 - pF Switching Speeds T urn-On I F=5mA, VL=10V tON - 0.7 5 ms T urn-Off t OFF - 0.09 5 Form-B (Normally Closed) Characteristics Load Current Continuous -I L - - 0.5 A Peak t < 10ms I LPK - - 1.2 On-resistance I L=0.5A R ON - 1.63 2 Ω Off-State Leakage Current V L=60V , IF=5mA I LEAK --1 μA Output Capacitance I F=5mA, 50V , f=1MHz C OUT - 280 - pF Switching Speeds T urn-On IF=5mA, VL=10V tON - 0.58 5 ms T urn-Off t OFF - 0.76 5 Input Characteristics @ 25°C Form-A and Form-B Characteristics Input Control Current I L=Load Current I F --2 m A Input Dropout Current - I F 0.1 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Current V R=5V I R -- 1 0 μA Common Characteristics @ 25°C Capacitance, Input to Output - C I/O -3- p F *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation val ue. Parameter Ratings Units Blocking Voltage 60 V P Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA Input Power Dissipation 1 150 mW T otal Power Dissipation 2 800 mW Isolation Voltage, Input to Output 3750 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Electrical absolute maximum ratings are at 25°C Absolute Maximum Ratings

Electrical Characteristics

www.clare.com 3R01 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage Drop (V) Device Count (N) 1-Form-A & 1-Form-B Relays Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) On-Resistance (Ω) Device Count (N) 1-Form-A Relay Typical On-Resistance (N=50, TA=25ºC, IL=1A, IF=5mA) On-Resistance (Ω) Device Count (N) 1-Form-B Relay Typical On-Resistance (N=50, TA=25ºC, IL=5mA, IF=0mA) Blocking Voltage (VP) Device Count (N) 1-Form-A Relay Typical Blocking Voltage (N=50, TA=25ºC) Blocking Voltage (VP) 75 76 77 78 79 80 Device Count (N) 1-Form-B Relay Typical Blocking Voltage (N=50, TA=25ºC, IF=5mA) LED Forward Current (mA) Device Count (N) 1-Form-A Relay Typical IF for Switch Operation (N=50, TA=25ºC, IL=200mA) LED Forward Current (mA) Device Count (N) 1-Form-B Relay Typical IF for Switch Operation (N=50, TA=25ºC, IL=200mA) Turn-Off Time (ms) Device Count (N) 1-Form-A Relay Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) Turn-On Time (ms) Device Count (N) 1-Form-A Relay Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) Turn-On Time (ms) Device Count (N) 1-Form-B Relay Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) Turn-Off Time (ms) Device Count (N) 1-Form-B Relay Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA)

www.clare.com4 LBA716 R01 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (A) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Form-A Relay Typical Load Current vs. Temperature (IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 1-Form-A Relay Typical Leakage vs. Temperature Measured Across Pins 5 & 6 (VL=60V) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) 1-Form-A Relay Typical Blocking Voltage vs. Temperature Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn On Time (ms) 0.5 1.0 1.5 2.0 2.5 1-Form-A Relay Typical Turn-On vs. Temperature (IL=100mA) IF=2mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn Off Time (μs) 1-Form-A Relay Typical Turn-Off vs. Temperature (IL=100mA) IF=2mA IF=5mA LED Forward Current (mA) 0 1 02 0 3 04 05 0 Turn-On (μs) 200 400 600 800 1000 1200 1-Form-A Relay Typical Turn-On vs. LED Forward Current (IL=100mA) LED Forward Current (mA) 0 1 02 0 3 04 05 0 Turn-Off Time (μs) 77.1 77.2 77.3 77.4 77.5 77.6 77.7 77.8 1-Form-A Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 AC On-Resistance (Ω) 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 1-Form-A Relay Typical On-Resistance (AC) vs. Temperature (IL=500mA, IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Current (mA) 0.70 0.75 0.80 0.85 0.90 0.95 1-Form-A Relay Typical IF for Switch Operation vs. Temperature (IL=200mA) Voltage (V) Current (A) -1.0 -0.5 0.0 0.5 1.0 1-Form-A Relay Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) Time 10μs 100 μs 1ms 10ms 100ms 1s 10s 100s Load Current (A) 1-Form-A Relay Energy Rating Curve

www.clare.com 5R01 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (A) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 Form-B Relay Typical Load Current vs. Temperature (IF=0mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 100 150 200 250 300 350 1-Form-B Relay Typical Leakage vs.Temperature Measured Across Pins 7&8 (IF=5mA, VL=60V) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) 1-Form-B Relay Typical Blocking Voltage vs. Temperature (IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (μs) 100 200 300 400 500 600 700 800 1-Form-B Relay Typical Turn-On vs. Temperature (IL=100mA) IF=2mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (ms) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 1-Form-B Relay Typical Turn-Off vs. Temperature (IL=100mA) IF=2mA IF=5mA LED Forward Current (mA) 0 1 02 0 3 04 05 0 Turn-On Time (μs) 417 418 419 420 421 422 423 1-Form-B Typical Turn-On vs. LED Forward Current (IL=100mA) LED Forward Current (ma) 0 1 02 0 3 04 05 0 Turn-Off Time (ms) 0.5 1.0 1.5 2.0 2.5 1-Form-B Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (Ω) 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1-Form-B Relay Typical On-Resistance vs. Temperature (IL=100mA, IF=0mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Current (mA) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 1-Form-B Relay Typical IF for Switch Operation vs. Temperature (IL=100mA) Voltage (V) Current (A) -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 1-Form-B Relay Typical Load Voltage vs. Load Current (TA=25ºC, IF=0mA) Time 10μs 100 μs 1ms 10ms 100ms 1s 10s 100s Load Current (A) 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1-Form-B Relay Energy Rating Curve

www.clare.com6 LBA716 R01 MECHANICAL DIMENSIONS Manufacturing Information RoHS 2002/95/EC e3Pb Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 0.457 ± 0.076 (0.018 ± 0.003) 9.652 ± 0.381 (0.380 ± 0.015) 8-Pin DIP Through-Hole Package 7.239 TYP . (0.285) 3.302 (0.130) 9.144 TYP . (0.360 TYP .) 7.620 ± 0.254 (0.300 ± 0.010)

4.064 Typ

(0.160 Typ) 0.889 ± 0.102 (0.035 ± 0.004) PC Board Pattern Dimensions mm (inches) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 8-Pin Surface Mount Package 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 6.350 ± 0.127 (0.250 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.318 ± 0.005) (0.160 Typ) 0.889 ± 0.102 (0.035 ± 0.004) Recommended PCB Land Pattern Dimensions mm (inches) 3.302 (0.130) 4.445 ± 0.127 (0.175 ± 0.005) 7.620 ± 0.254 (0.300 ± 0.010) 0.635 ± 0.127 (0.025 ± 0.005) 0.254 ± 0.127 (0.010 ± 0.0005) 2.54 (0.10) 8.90 (0.3503)1.65 (0.0649) 0.65 (0.0255)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Exce pt as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LBA716-R01 ©Copyright 2008, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/23/08 For additional information please visit our website at: www.clare.com LBA716 MECHANICAL DIMENSIONS Embossment Embossed Carrier Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 330.2 DIA. (13.00 DIA.) P = 12.00 (0.472) User Direction of Feed W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Ao = 10.30 (0.406) K1 = 4.20 (0.165) Top Cover Tape K0 = 4.90 (0.193) Tape and Reel Packaging for 8-Pin Surface Mount Package NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Dimensions mm (inches)