LB6005A PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

< 4-channel < On/Off delay < Mounting in Zone 2, Class I/Div.2 or in the safe area < Positive or negative logic selectable < Simulation mode for service operations (forcing) < Permanently self-monitoring < Output with watchdog < Module can be exchanged under voltage Function The device features 4 independent channels. The device can be used to switch solenoids, sounders, or lamps. The device can perform general switching operations, such as switching auxiliary power circuits. The outputs are galvanically isolated from the bus and the power supply. Connection Zone 2 COM I II III IV IV I Technical Data Slots Occupied slots 2 Supply Connection backplane bus Rated voltage Ur 12 V DC , only in connection with the power supplies LB9*** Power dissipation 1.05 W Power consumption 1.05 W Internal bus Connection backplane bus Interface manufacturer-specific bus to standard com unit Digital output Release date: 2021-12--

01 Date of

Release date: 2021-12-01 Date of issue: 2021-12-01 Filename: 254817_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Connection channel I: 1-2 NC, 3; channel II: 6-7 NC, 8; channel III: 9-10 NC, 11; channel IV: 14-15 NC, 16 Relay Switching voltage DC: 30 V AC: 150 V Switching current 1 A DC / AC resistive load Switch power DC: 30 W , AC: 60 W Minimum load 1 V 1 mA Electrical life 0.1 mio. cycles Contact Material AgPd gold plated Response time 20 ms (depending on bus cycle time) Watchdog within 0.5 s the device goes in safe state, e.g. after loss of communication Indicators/settings LED indication Power LED (P) green: supply Status LED (I) red: communication error Coding optional mechanical coding via front socket Directive conformity Electromagnetic compatibility Directive 2014/30/EU EN 61326-1:2013 Low voltage Directive 2014/35/EU EN 61010-1 Conformity Electromagnetic compatibility NE 21 Degree of protection IEC 60529 Environmental test EN 60068-2-14 Shock resistance EN 60068-2-27 Vibration resistance EN 60068-2-6 Damaging gas EN 60068-2-42 Relative humidity EN 60068-2-56 Ambient conditions Relative humidity 95 % non-condensing Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 when mounted on backplane Connection removable front connector with screw flange (accessory) Mass approx. 130 g Dimensions 32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch) Data for application in connection with hazardous areas Certificate PF 08 CERT 1234 X Marking 1 II 3 G Ex nA nC IIC T4 Gc Galvanic isolation Output/power supply, internal bus safe electrical isolation acc. to EN 61010-1 Directive conformity Relay output LB6005A Release date: 2021-12-01 Date of issue: 2021-12-01 Filename: 254817_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 EN 60079-15:2010 International approvals UL approval E106378 IECEx approval BVS 09.0037X Approved for Ex nA nC IIC T4 Gc General information System information The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2 or Zone 22) the module must be installed in an appropriate enclosure. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Assembly P I Front view Status LED red Power LED green Sockets for removable plugs green (accessory) Relay output LB6005A Release date: 2021-12-01 Date of issue: 2021-12-01 Filename: 254817_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091