LB1272 SANYO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
+ Ideally suited for 18-digit printer because of built-in 6 units. + With built-in protective diodes against negative inputs. + Ideally suited for printer mechanism with load current 85 mA, Absolute Maximum Ratings at Tg=25°C unit Output Supply Voltage Vout 0.3 to +22 Vv Input Supply Voltage VIN —40 to +12 Vv Pin 8 Supply Voltage Vec —0,3 to +20 v Output Flow-in Current louT Per unit 100 mA Instantaneous Output lop Per unit, duty=10% 150 mA Flow-in Current Pulse width< 20ms Spark Killer Diode Forward Current 1F(S) " 150 mA GND Pin Flow-out Current IGP " —900 to 0 mA Pin 8 Instantaneous Flow-out lecp a —900 to 0 mA Current Pin 8 Flow-out Current loc —600 to 0 mA Allowable Power Dissipation Pg max 770 mA Operating Temperature Topr -20 to +80 °c Storage Temperature Tstg ~A0 to +125 °c Allowable Operating Conditions at Ta = 25°C unit Output Supply Voltage VouT 22 V max Input High Level Voltage VIH Output pin current=100mA 3 to 12 Vv Input Low Level Voltage VIL Output pin current=100uA —-35 to +1 Vv Load Inductance tL Using protective diode 100 mH max (Continued on next page) Equivalent Circuit 1 %2 B23 a4 ns m6 9 Package Dimensions 3003A-D14IC 9 96 ee) 00 oR 09 9 (unit : mm) eee led [ed [ed lee : , oF Ke Ke Ke Ke Ke he = =a to ta Dif ra re ta TT 4 ) ay ARP moh EJ “RTE!
2 UU UY ”
Unit (resistance: 2) x79 SANYO: DIP14 SANYO Electric Co.,Ltd. Semiconductor Business Headquarters TOKYO OFFICE Tokyo Bldg.,1-10,1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN ° O3095YK/ 7097KI/8215KI/7213KI,TS )!l /7241KI,TS No783-1/2
a Operating Characteristics at Tg=25°C min typ) max unit Output Voltage VouT(1) — VIN=3V, louT=150mA 1.7 Vv Vout(2) VIN=3V, IouT=100mA 14 Vv Output Sustain Voltage VouTis) Vin=open, IoUT=150mA 22 Vv Applied time < 10us Output Leakage Current loft VIN=1V, Vout#22V 100 BA Input Current lIN Vin=3V : 1 mA Output Current lout VN=0.3mA, VoUT=1.4V 100 mA Input Leakage Current Neak VIN=-35V —10 HA Spark Killer Diode Leakage Neak(s) VouT=OV, Pin8=20V 30 BA Current Spark Killer Diode Foward VF(S) Ie(3)=150mA 1,7 v Voltage Igut - Collector duty cycle S Pg max - Ta xt E 900 ett] | TTT Ty] opi Ty TT] roof | | | TP | Pry a8 TT «0 = m—! TX aeEren | PTT oe N 3S A gol {AAT TT gs NT © 120 s Poe eH PN g g & 6, | [N Ns TT | 24 Ni 2° PF Nt rip} S_q | | | TN E mS] Es a z ste ZB [Ropottvettecuonoe — TS TTT Coltector Conducting Duty Cycle — % a Ambient Temperature, Tg — °C IHNo products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss, WM Anyone purchasing any products described or contained herein for an-above-mentioned use shall: © Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: ® Not impose any responsibility for any fault or negligence which may ‘be cited in any such claim or litigation on SANYO ELECTRIC CO, LTD, its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Hi Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guarant- eed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees pr are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. , No783-2/2