LB1205_08 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • 4-unit, high withstand voltage design (65V), large-current (1.5A) Darlington driver.
  • PNP input type (low active).
  • On-chip spark killer diodes.
  • On-chip input protection diodes.
  • Capable of being driven directly from 5V operated CMOS, TTL. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit VDD max 7.0 V Maximum supply voltage VCC max 62 V Output supply voltage V O max 65 V Input supply voltage V IN max V IN ≥ GND V DD-7.0 to VDD-10.0 V Output current I O max 1.5 A Spark killer diode forward current I FS 1.5 A Independent IC 1.9 W Allowable power dissipation Pd max Mounted on the recommended PCB 2.6 W Operating temperature Topr -20 to +75 °C Storage temperature Tstg -55 to +150 °C Monolithic Digital IC High-Voltage, Large-Current Darlington Driver

No.1831-2/3 Allowable Operating Conditions at Ta = 25°C Parameter Symbol Conditions Ratings Unit Supply voltage range V DD 3.5 to 7.0 V Input “ON” level voltage V INon V IN ≥ GND, IO = 1.0A V DD-7.0 to VDD-2.6 V Input “OFF” level voltage V INoff I O ≤ 30µA V DD-0.3 to VDD+10.0 V Electrical Characteristics at Ta = 25°C, VDD = 5V Ratings Parameter Symbol Conditions min typ max Unit VOsat1 V IN = VDD-5.0V, IO = 0.5A 1.2 V VOsat2 V IN = VDD-5.0V, IO = 1.0A 1.5 V Output saturation voltage VOsat3 V IN = VDD-5.0V, IO = 1.5A 2.0 V Output sustain voltage V Osus I O = 100mA 65 V Input current I IN V DD = 7.0V, VIN = VDD-7.0V 1.0 mA Spark killer diode forward voltage V FS I FS = 1.5A 3.0 V Spark killer diode reverse current I RS V CC = 62V, VO = 0V 30 µA Package Dimensions unit : mm (typ) 3054B SANYO : DIP16F(300mil) 1 8 16 9 0.5 (3.46) 3.5 4.26max 0.51min(0.61) 2.54 19.0 1.3 0.4 7.62 6.45 1.65 1.25 Pin Assignment 1 2 3 4 5 6 7 8 VCC OUT1 IN1 GND IN2 NCGND OUT2 16 15 14 13 12 11 10 9 OUT4 IN4 V DD GND GND IN3 OUT3 V CC Top view Note: VCC (pins 1 and 9) is shorted internally. Recommended PCB 80×60mm2 Cu-foiled (GND) 3cm2 -20 0 20 40 60 80 1000 3.0 2.0 1.5 1.0 0.5 Pd max -- Ta 2.5 2.6 1.9 1.14 1.56 Ambient temperature, Ta -- °C Allowable power dissipation, Pd max -- W Independent IC Mounted on the recommended PCB

PS No.1831-3/3 SANYO Semiconductor Co.,Ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. When designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. Such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equi pment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor C o.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. VOsat -- IO 72 3 5 72 30.1 1.0 1.0 Output current, IO -- A Output saturation voltage, VOsat -- V Equivalent Circuit VCC OUT1 IN1 GND IN2 OUT2 OUT4 IN4 VDD IN3 OUT3 8kΩ 13kΩ 1.25kΩ20kΩ 2kΩ This catalog provides information as of October, 2008. Specifications and information herein are subject to change without notice.