LA0152CS SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

For Ultra-small illumination Sensor Photo IC LA0152CS Overview The LA0152CS is a photo IC for micro-sized illumination sensor which has the characteristics of spectral response similar to that of human eyes. It is suitable for applications like mobile phone, laptop computer, PDA, DSC and Camcorder. Characteristic

  • Smallest OD-CSP package in the world (1.01mm x 1.01mm x thickness: 0.6mm)
  • Low variation and Optical Output Current in low temperature fluctuation.
  • Integrated Sleep function.
  • Low current consumption. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage VCC 6V Operating temperature Topr -30 to +85 °C Storage temperature Tstg -40 to +100 °C Recommended operating conditions and operating voltage range at Ta = 25°C Ratings Parameter Symbol Conditions min typ max Unit SW pin low voltage Vl Sleep mode 0 0.4 V SW pin high voltage Vh Active mode 1.4 VCC V Specifications of any and all SANYO Semiconductor Co.,L td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer 's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer 'sp r o d u c t so r equipment. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use. D1609 SY 20091202-S00005 No.A1633-1/6

Electrical and optical characteristics at Ta = 25°C, V CC = 3.3V Ratings Parameter Symbol Conditions min typ max Unit Recommended Supply Voltage VCC 2.2 3.3 5.5 V Current dissipation *1, *3 ICC Ev = 1000 lux, RL = 5kΩ 90 150 210 μA Sleep Current(1) *3 ISL1 Ev= 0 lux 0.1 μA Sleep Current(1) *3 ISL2 Ev= 1000 lux 0.3 μA Output current (2) *1, *3 IO1 Ev = 100 lx 6 8 10 μA Output current (2) *1, *3 IO2 Ev = 1000 lx 60 80 100 μA Dark current *3 Ileak Ev = 0 lx 0.1 μA Temperature coefficient *2 Itc Ev = 100 lx 0.34 %/°C Rise time *4 Tr Ev = 1000 lx, RL = 5kΩ 15 40 μs Fall time *4 Tf Ev = 1000 lx, RL = 5kΩ 150 500 μs Peak sensitivity wave length *2 λp 550 nm Saturation output voltage *1, *3 VO Ev = 1000 lx, RL = 150kΩ 3.0 3.2 V *1. Measured with the standard light source A. White LED is used instead in the mass production line. *2. Design guaranteed item *3. Test circuit for measuring curren t dissipation and output current Ipd LA0152CS VCC OUT A A Light source *4. Measuring method of rise time (Tr) and fall time (Tf) Ipd VOUT 90% 10% TfTr GND Ipd LA0152CS VCC OUT Pulse drive White LED 1.5V No.A1633-2/6

unit : mm (typ) 3350A SANYO : ODCSP4(1.01X1.01) 0.5 0.5 0.18 1.01 1.01(0.5)0.1

0.67 MAX

TOP VIEW SIDE VIEW BOTTOM VIEW Pad layout 4 1 3 2 1 4 2 3 <Bottom View><Top View> Pin No. Pin Name Function

1 V CC Power supply

2 EN Enable

3 GND Ground

4 OUT Output

Ball pitch : 0.5mm, Ball size : 0.18mm Pad layout (Photos) Top View Bottom View 1,VCC 2,EN 3,Gnd 4,Out Photo diode. Only this part looks dark on the product. Pin 1 mark It is located at the center of the bottom of the pakage. * The photo diode is located in pin 3. Be careful not to mistake the pin 1 mark for the photo diode. No.A1633-3/6

Chip pattern and photo-receiving pattern diagrams * Pin 1 is on the upper left. LA0152CS chip pattern diagram (top view) LA0152CS photo-receiving pattern enlarged diagram (effective area) No.A1633-4/6

0.1 100 1000 100 1000 1 10010 1k 100 1k10k 0.001 0.001 10 1 1 23 57 23 57 23 57 23 57 23 5710 100 1k 10k 100k 200 400 600 800 1000 0.2 0.4 0.6 0.8 1.2 1.4 0.2 0.4 0.6 0.8 1.2 1.4 2345 3456 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.8 0.2 0.4 0.6 1.4 1.2 --60 --40 --20 0 20 40 60 80 100 0 20 40 60 80 100120 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 --60 --40 --20 120 1 10 10k LA0152CSHuman eye @1000lx @1000lx IO - Llluminance Illuminance -- lx Illuminance -- lx ICC -- Illuminance Supply voltage, VCC -- V No.A1633-5/6 Relative output current ratio, RIO RIO -- VCC Supply voltage, VCC -- V Relative current drain ratio, RICC -- ratio RICC -- VCC RIO -- Ta Ambient temperature, Ta -- C O ID -- Ta Ambient temperature, Ta -- C ratio --ratio --Relative output current ratio, RI Illuminance -- lx O VO -- Illuminance Relative sensitivity, RS -- ratio V --Output voltage, V

0.0001 0.01 0.1 1 10010 1k 10k 0.20 0.40 0.60 0.80 1.00 1.20 -90 -60 -30 0 60 0.001 100 0 1.50.5 2 30 90 @1000lx 1 2.5 3 Angle, deg -- ° Photopic luminous efficiency, PLE -- ratio PLE -- deg N gainSleep current - Illuminance Illuminance -- lx Output current, IO -- μA Output Current - EN voltage EN voltage , - V SANYO Semiconductor Co.,Ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. When designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. Such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equi pment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor C o.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. This catalog provides information as of December, 2009. Specifications and inform ation herein are subject to change without notice. PS No.A1633-6/6