L703 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS The Connor Winfield L703 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±100ppm, 0 to 85°C overall overall frequency tolerance, LVDS Differential Outputs and Tri-state Enable / Disable function. The L703 is designed using a 2X or 4X PLL multiplication to achieve the high output frequencies. L703 - 333MHz CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION LVDS DIFFERENTIAL OUTPUTS ENABLE / DISABLE LOW JITTER <3pS RMS OVERALL FREQUENCY TOLERANCE ±100ppm TEMPERATURE RANGE: 0 to 85°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT CERAMIC SURFACE MOUNT 3.3V LVDS 5x7.0mm HIGH FREQUENCY CLOCK OSCILLATOR L703 Ds022 05/18/06 CW L703 333M 0538 ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 125 Supply Voltage (Vcc) -0.5 4.6 Vdc Input Voltage (Vcc) -0.5 Vcc+0.5 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 200 800 MHz Total Frequency Tolerance -100 100 ppm Operating Temperature Range Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) mA Jitter (BW=10Hz to 20MHz) ps rms Jitter (BW=12kHz to 80MHz) ps rms SSB Phase Noise at 10Hz offset -75 dBc/Hz SSB Phase Noise at 100Hz offset -95 dBc/Hz SSB Phase Noise at 1KHz offset -110 dBc/Hz SSB Phase Noise at 10KHz offset -125 dBc/Hz SSB Phase Noise at 100KHz offset -120 dBc/Hz INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (Low) (Vil) 0.3Vcc Vdc Enable Input Voltage (High) (Vih) 0.7Vcc Vdc LVDS OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD 100 Ohms Output Differential Voltage (Vod) 250 450 mV Duty Cycle at 50% Level Rise / Fall Time 0.6 1.0 nS PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package with grounded metal cover. PROCESS RECOMMENDATIONS TABLE 6.0 Solder Reflow SMD product suitable for Convection Reflow soldering. Peak temperature 260°C. Maximum time above 220°C, 60 seconds. 1.0 Notes Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2.0 When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3.0 Vod measured with 100-ohm resistor between the true output and the complementary output. 4.0 Duty Cycle measured at 50% of output swing.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS TABLE 7.0 Pin Function Enable / Disable N/C Ground (Case) Output Q Comp Output Q Vcc TABLE 8.0 Enable / Disable Function (Pad 1) Output High or Open Enable Low Disable (High Impedance) .070 (1.8mm) CW L703 333M 0538 MAX MAX MAX E/D N/C 100 ohm 100 ohm Vod Vod Q Q 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Pin Connection Enable / Disable Function Package Outline and Dimensions Suggested Pad Layout Output Waveform Test Circuit Solder Profile Ds022 05/18/06