KTE3001GQ0 SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
OEM pressure transmitters for industrial media 1/6December 2008 / 626 www.sensortechnics.com
FEATURES
- For many industrial gases and liquids 4...20 mA output
- Field interchangeable
- For industrial use SPECIFICATIONS 10,11 Maximum ratings Supply voltage (reverse polarity protection) KTx3...4 2 7...32 V Maximum load current Source/Sink 1 mA Temperature limits Storage -40...100°C Operating -25...85°C Compensated 0...70°C Humidity limits 0 - 95 %RH Vibration (5 to 500 Hz) 10 g RMS Mechanical shock 50 g Proof pressure 3 2 x rated pressure MEDIA COMPATIBILITY Wetted materials: PPS, ceramic Al2O 3 and NBR8 Housing: stainless steel 1.4404 (316L), protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X ELECTRICAL CONNECTION 4... 20 mA output +Vs Vout -Vs Sensor GND V 13 (8, 9)...32 V Internal connection (do not connect) Sensor -Vs L V R GND 7...32 V+Vs N/C Internal connection (do not connect)
OEM pressure transmitters for industrial media 2/6December 2008 / 626 www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS (VS = 15 V, RL > 100 kΩ, tamb = 25°C) scitsiretcarahC. niM. pyT. xaMt inU erusserpgnitarepO. ..1003ETK ...G10N3ETK ...G10P3ETK ...2003ETK ...5003ETK ...0103ETK ...6103ETK ...0203ETK ...5203ETK ...5303ETK ...0503ETK rab ...5103UTK ...G51N3UTK ...G51P3UTK ...0303UTK ...0503UTK ...0013UTK ...0023UTK ...0033UTK ...0053UTK ...0573UTK 51- 51- 001 002 003 005 057 isp stceffelamrehT )C°07...0( tesffO napS 20.0 20.0 50.0
50.0 C°/OSF%stceffelamrehT
30.0 30.0 )LSB(siseretsyh,ytiraenil-noNa y tilibataeperdn 5 1.0±3 .0± OSF%ytilibatsmretgnoL 6 3.0± )zHk1<f<0(esiontuptuO 40.0± )%09ot01(emitesnopseR 15 s m noitcejerylppusrewoP 500.0 V/OSF% Specification notes: 10. 11. IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. Non-linearity refers to the B est S traight Line fit measured for offset, full scale span and 1/2 full scale span. Long term stability is the change in output after one year or 1 million pressure cycles. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. Other sealing materials are available on request. Test are in accordance with EN61000-6-2, April 1999. CE-labelling is in accordance with 89/336/EEC. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC.
OEM pressure transmitters for industrial media 3/6December 2008 / 626 www.sensortechnics.com scitsiretcarahC. niM. pyT. xaMt inU Vsrehtolla3 0.08 0.0 srehtolla5 9.40 .55 0.5 ecnadepmituptuO 52 Ω )daolon(noitpmusnoctnerruC 35 A m scitsiretcarahC. niM. pyT. xaMt inU Vsrehtolla3 0.01 .0 srehtolla9 .90 11 .01 ecnadepmituptuO 52 Ω )daolon(noitpmusnoctnerruC 35 A m INDIVIDUAL PERFORMANCE CHARACTERISTICS 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) 0...5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) scitsiretcarahC. niM. pyT. xaMt inU Vsrehtolla5 4.05 .05 5.0 srehtolla5 9.345 0.4 ecnadepmituptuO 52 Ω )daolon(noitpmusnoctnerruC 35 A m 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) scitsiretcarahC. niM. pyT. xaMt inU Amsrehtolla9 .30 .41 .4 srehtolla9 .510 .611 .61 I(noitpmusnocrewoP L )Am02=0 52W m scitsiretcarahC. niM. pyT. xaMt inU Vsrehtolla5 9.01 5 0.1 srehtolla5 9.40 .55 0.5 ecnadepmituptuO 52 Ω )daolon(noitpmusnoctnerruC 35 A m 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C)
OEM pressure transmitters for industrial media 4/6December 2008 / 626 www.sensortechnics.com operating pressure KTx3P... -40-100-80 -60 -20 0 +20 Vout V KTx3N... +100+40 +60 +80 % all other operating pressure -100 +100+40+60+80 % Vout V KTx3P... all other KTx3N... OUTPUT CHARACTERISTICS 4...20 mA output version operating pressure -100 +100+80+40 +60 % Iout mA KTx3N... KTx3P... all other operating pressure KTx3P... -40-100-80 -60 -20 0 +20 Vout V KTx3N... +100+40 +60 +80 % all other operating pressure KTx3P... -40-100-80 -60 -20 0 +20 Vout V KTx3N... +100+40 +60 +80 % all other
OEM pressure transmitters for industrial media 5/6December 2008 / 626 www.sensortechnics.com LOAD LIMITATION 4...20 mA output version OUTLINE DRAWING mass: 210 g dimensions in mm (inches) 30 (1.18) vent hole G1/4" (1/4" BSP) 27.0 (1.06) diam. (0.47) 8.5 (0.33) NOM 68 (2.86)12 (0.47) 4.5 (0.18) 600 0 75 200 400 800 1000 Ohm 1200 1400 3020 25 supply voltage 32 V operating range RECOMMENDED ACCESSORY Plug DIN EN 175301-803 A and profile washer included in delivery. For a complete connector/cable assembly use order no. ZK0001 10-x (x=cable lenghts in m). dimensions in mm Note: For proper function of all gage devices the gage port must be vented to the atmosphere through the connector/cable assembly. Profile washer
OEM pressure transmitters for industrial media 6/6December 2008 / 626 www.sensortechnics.com KTx3 xxx x x x
ORDERING INFORMATION
0: 0...10 V 1: 1...6 V 4: 4...20 mA 7: 0...5 V Fitting size Q: G 1/4" (1/4" BSP) male Other fittings on special request Pressure mode G : gage pressure A : absolute pressure KTE3000 series KTU3000 series 001: 0 to 1 bar 015: 0 to 15 psi N01: -1 to +1 bar N15: -15 to +15 psi P01: -1 to 0 bar P15: -15 to 0 psi 002: 0 to 2 bar 030: 0 to 30 psi 005: 0 to 5 bar 050: 0 to 50 psi 010: 0 to 10 bar 100: 0 to 100 psi 016: 0 to 16 bar 200: 0 to 200 psi 020: 0 to 20 bar 300: 0 to 300 psi 025: 0 to 25 bar 500: 0 to 500 psi 035: 0 to 35 bar 750: 0 to 750 psi 050: 0 to 50 bar E: bar calibration U: psi calibration ELECTROMAGNETIC CAPABILITY 9 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Note: Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. snoitidnoctseTn oiretirC ecnerefretnI ycneuqerfoidar,detaidaR )IFR(ytinummidleifcitengamortcele :3-4-00016NEz HM0001ot08,m/V01,3edarG )zHk1(CMA%08 AO SF%1< /tneisnarttsaflacirtcelE )TFE(ytinummitsrub :4-4-00016NEV k2±,3edarG BO SF%1< ytinummiegrahcsidcitatsortcelE )DSE(tset :2-4-00016NEe grahcsidtcatnoc,Vk8±,4edarG BO SF%1< secnabrutsiddetcudnocotytinummI sdleifycneuqerf-oidarybdecudni :6-4-00016NEz HM08ot51.0,3edarG )zHk1(CMA%08,V01 AO SF%1<