KTU1120 KINETIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Over-Voltage Protection  24VDC Tolerance on CC1/2, SBU1/2  CC1/2 OVP = 5.8V  SBU1/2 OVP = 3.83V  Ultra-Fast 15ns Response Time
  • IEC61000-4-5 Surge Protection  ±40V Surge Tolerance on CC1/2  ±30V Surge Tolerance on SBU1/2
  • IEC61000-4-2 ESD Protection  ±15kV air gap on CC1/2, SBU1/2  ±8kV contact on CC1/2, SBU1/2  ±2kV HBM on all pins (JEDEC JS-001-2017)
  • CC Switches:  1.25A, 270mΩ, 40pF, 140MHz  Automatic 5.1kΩ dead battery pull-down
  • SBU Switches:  3Ω, 11pF, 800MHz
  • 2.5V to 5.5V Operating Supply Voltage Range
  • -40°C to 85°C Operating Temperature Range
  • 16-bump WLCSP 1.7mmx1.7mm (0.4mm pitch)
  • RoHS and Green Compliant Brief Description The KTU1120 provides four conducting paths with over- voltage protection (OVP) for USB Type-C, CC, and SBU signals. Once an over -voltage event is detected, it will shut down all paths to protect circuits in system side, like PD controller from damage. All t he SBU and CC switches have very low on - capacitance for broad bandwidth to allow high -speed signal passing through without loss. The CC1/2 switches have low on -resistance for passing V CONN power up to 1.25A. During dead battery conditions, internal 5.1kΩ resistors automatically pull down on CC1/2 to ensure that the up- stream source provides 5V on VBUS. The KTU1120 is packaged in RoHS and Green compliant 16-bump WLCSP 1.7mmx1.7mm package.

Applications

  • Notebook PCs, Netbooks, Tablets, Monitors, TVs
  • Gaming Devices, Set-Top Boxes, Networking Typical Application KTU1120 SBU SWITCHES SB1S SB2S DP AUX, UART, ADC, etc. CC SWITCHES CC1 CC2 CC1S CC2S SBU1 SBU2 TYPE-C PD PORT CNTLRU S B P O R T VBUS SYSTEM CPU GND VSYS 1uF VCC CESD GND 0.1uF INTERFACE LOGIC FLAG RPD_G1 RPD_G2 USB Type-C Port Protector for CC and SBU Pins For full datasheet, click HERE.

August 2021 - Revision 04a Page 2 Kinetic Technologies Confidential

Ordering Information

Part Number Marking1 Operating Temperature Package KTU1120EGAB-TA RMXXYYZZZZ -40°C to +85°C WLCSP44-16 1. XX = Date Code, YY = Assembly Code, ZZZZ = Serial Number Kinetic Technologies cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Kinetic Technologies product. No intellectual property or circuit patent licenses are implied. Kinetic Technologies reserves the right to change the circuitry and specifications without notice at any time.