MSP430 KENTECDISPLAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
1.1 Overview
MSP430 LaunchPad Value Line Development Kit (see Figure 1). Figure 1. Capacitive Sense BoosterPack With LaunchPad directly with the onboard LEDs.
1.2 Kit Contents
- One ITO Glass Capacitive Touch sensor with five function keys and FPC pinout (Figure 2)
- One converter board for connected the ITO glass sensor to the MSP-EXP430G2 MCU board (Figure 3) MSP430 LaunchPad (MSP-EXP430G2) with Capacitive Touch BoosterPack (KT35S430-S1) User Guide
Figure 2. ITO Glass Capacitive Touch sensor Figure 3. Connector board
2 Hardware Preparation
LaunchPad LEDs from P1.0 and P1.6. 2.3. Remove R34 and C24 on the LaunchPad to disconnect it from P1.3. Development Kit and insert it in the LaunchPad MCU socket. text are in the same direction as the text on the Launchpad. 2.6. Connect the LaunchPad with an USB cable to a PC. NOTE: The 32-kHz crystal/oscillator on pins 12 and 13 is not required for the ITO Capacitive Sensor demo.
3 Software Preparation
Bellow attachment is the source code for the projects, compile and download it to the LaunchPad.
1 Source code package
4 ITO Capacitive Touch BoosterPack Hardware
Table 1. BoosterPack Interface
1 VCC VCC Supply voltage
10 RST/SBWTDIO NC Reset line for SBW JTAG data, not connected to BoosterPack
11 TEST/SBWTCK CN Test line for SBW JTAG clock, not connected to BoosterPack
14 GND GND Supply ground
Figure 4. ITO Capacitive Sensor
5 Schematics and PCB Layout
5.1 Schematics
Figure 5. Converter board schematic
5.2 PCB Layout
Figure 6. Converter board layout, Top layer Figure 7. Converter board layout, Bottom layer