KPS-3227SP1C TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© 20 19 Kingbright. All Rights Reserved. Spec No: DSAG5419 / 1207100002 Rev No: V.16 Date: 01/17/2019 Page 1 / 3 DESCRIP TION z T he KPS-3227SP1C is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting appliances and the device is sensitive to the visible spectrum

FEATURES

nent in accordance with RoHS z Ada pted to human eye responsive z W ide angle of half sensitivity z Moistur e sensitivity level: 3 z Packag e: 2000 pcs / reel APPLIC ATIONS Detection of ambi ent light to control display backlighting in: z Mobil e phones z PDAs z Note books z Vide o cameras PACKAGE DI MENSIONS ABSOLUTE MAXIMUM RATINGS at TA=25°C N ote: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. KPS-3227SP1C Ambient Light Photo Sensor RECOMMENDED SOLDERING PATTERN (units : mm ; tolerance : ± 0.1) Parameter Sy mbol Va lue Unit Notice Collector Emitter Voltage Vce o 60 V Iceo = 100 μ A Emitter-Collector Voltage Vec o 4 V Ieco = 100 μ A Operating Temperature Topr -40 to +85 °C - S torage Temperature Tst g -40 to +85 - °C Notes: All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Kingbright 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAG5419 / 1207100002 Rev No: V.16 Date: 01/17/2019 Page 2 / 3 100 1000 10000 1 10 100 1000 10000 Illuminance vs. Output Phtocurrent Illuminance Ev (Lux) Output current (µA) Ta = 25 °C,Vce = 5V Flourescent Light Incandescent Lamp 20% 40% 60% 80% 100% 300 400 500 600 700 800 900 1000 1100 Ta = 25 °C Relative Spectral Responsivity vs. Wavelength Wav elength (nm) Relative spectral sensitivity (a. u.) CONVERTING PHOTOCURRENT TO VOLTAGE ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C KPS-3227SP1C Parameter Symbol Value Unit Conditions Typ. Max. Collector Emitter Breakdown Voltage BVceo - - V Iceo = 100 μ A Emitter Collector Breakdown Voltage BVeco - - V Ieco = 100 μ A Collector dark current ID 10 100 nA VCE = 5V EV = 0Lx Light Current (1) IPH1 6 - μ A VCE = 5V, Ev = 100 Lx [1] Light Current (2) IPH2 130 - μ A VCE = 5V, Ev = 1000 Lx [1] Angle of half sensitivity 2θ1/2 120 - deg Min. Wavelength of peak sensitivity λp - 580 - nm Saturation Output Voltage Vo 4.5 4.7 - V VCC = 5V, EV = 1000Lx [1], RL = 75K Ω Range of spectral bandwidth λ 0.1 390 - 950 nm Light Current (3) IPH3 - 950 - μ A VCE = 5V, Ev = 1000 Lx [2] Light Current (4) IPH4 - 420 - μ A VCE = 5V, Ev = 1000 Lx [3] Collector Emitter Saturation Voltage VCE (sat) - - 0.4 V IC = 10 mA Response Wavelength λ 390 - 700 nm >10% Response Notes: 1. White Fluorescent light (Color Temperature = 6200K) is used as light source. 2. Illuminance by CIE standard illuminant-A/2856K,incandescet lamp. 3. Sunlight (Color Temperature = 4600K) is used as light source. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and Output saturation voltage: Vout (max) = lout (max.) XRL ≤ Vout (saturation) = Vcc-0.3V Fig.1 Fig.2 Kingbright A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAG5419 / 1207100002 Rev No: V.16 Date: 01/17/2019 Page 3 / 3 TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS KPS-3227SP1C Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.kingbright.com/application_notes REEL DIMENSION (units : mm) Kingbright A ll data sheet.com