KPFA-3011BZ1RGZ1C-132-F TO-GRACE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
z 3.0 x1.5x1.0mm right angle SMD LED, 1.0mm thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Des criptions z Th e Blue source color devices are made with InGaN Light Emitting Diode. z The Hyper Red device is based on light emitting diode chip made from AlGaInP. z The Green source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Packag e Dimensions Not es: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Kingbright 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Parameter Condition Symbol Value Unit B R G Wavelength at Peak emission IF=20mA λ peak 465 631 520 nm Dominant Wavelength [1] IF=20mA λ dom 470 624 525 nm Spectral bandwidth at 50%Φ REL MAX IF=20mA Δλ 22 20 35 nm Forward Voltage [2] IF=20mA VF [typ.] VF [max.] 3.3 4.0 2.1 2.5 3.2 4.0 V Reverse Current VR=5V IR [max.] 10 10 10 uA Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit B R G Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C Junction Temperature TJ 100 100 100 °C Power dissipation PD 120 175 120 mW Total Power dissipation [3] P total 240 mW DC Forward Current [1] IF 30 70 30 mA Peak Forward Current [2] IFM 100 200 100 mA Reverse Voltage VR 5 5 5 V 8000 3000 8000 V Junction/ambient 1 chip on Rthj-a 290 400 400 °C/W Junction/ambient 3 chip on Rthj-a 630 590 610 °C/W Electrostatic Discharge Threshold (HBM) Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Iv (mcd) [2] @B:R:G=18.9mA: 10.6mA:20mA Dice Chroma- ticity Coordinates Viewing Angle [1] KPFA-3011BZ1RGZ1C-132/F Blue (InGaN) Water Clear 55 110 1270 0.3 0.3 Hyper Red (AlGaInP) 400 660 Green (InGaN) 500 780 150° Notes: 1. Single-color light 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. Value for total power dissipation when two and more chips are lit simultaneously. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Kingbright A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 0.0 0.2 0.4 0.6 0.8 1.0 - 9 0 - 7 5 - 6 0 - 4 5 - 3 0 - 1 50 1 53 04 56 07 59 0 R G B Ta = 25 °C RGB Spatial Distribution Angle (°) Kingbright A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 Kingbright A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 Full color (White Rank) Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. F1 F2 F3 F4 x y x y x y x y F5 F6 F7 F8 x y x y x y x y F9 F10 F11 F12 x y x y x y x y F13 F14 F15 F16 x y x y x y x y 0.20 0.25 0.30 0.35 0.40 x y F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 Kingbright A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 KPFA-3011BZ1RGZ1C-132/F Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) Kingbright A ll data sheet.com
SPEC NO: DSAN5594 REV NO: V.7B DATE: MAY/28/2016 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014257 PACKING & LABEL SPECIFICATIONS KPFA-3011BZ1RGZ1C-132/F Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes Kingbright A ll data sheet.com