KBL4005 NIUHANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Date:2014/10/20 http://www.nhel.com.cn BRIDGE RECTIFIERS Page: 1 of 5Rev.:AA KBL VOLTAGE

50 THRU 1000 Volts

4.0 AmpersCURRENT

Unit:Inch(mm) Production Data Sheet Niu Hang Electronic Co. Ltd MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C(UNLESS OTHERWISE NOTED) KBL4005 THRU KBL410 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High surge current capability Ideal for printed circuit boards Glass passivated chip junction

FEATURES

Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 260℃/20 seconds Mounting Position: Any Unit 200 400 600 800 1000 V 140 280 420 560 700 V 200 400 600 800 1000 V Maximum average forward output A superimposed on rated load (JEDEC Method) Rating for fusig (t<8.3ms) A sec pF A Symbol V RRM Peak forward surge current single sine-wave Maximum DC blocking voltage Typical junction capacitance per leg at 4.0V 1.0Mhz Operating junction temperature range Tc=75℃ V DC I F(AV) Maximum RMS voltage Absolute Maximum Ratings TL=25℃ unless otherwise specified. CJ T J T STG Storage temperature range 4.0 I t Parameter Maximum repetitive peak reverse voltage V RMS 150I FSM -55 to +150 -55 to +150 Maximum instantaneous forward voltage drop per leg at 2.0A V Ta=25℃ Ta=125℃ μAMaximum DC reverse current at rated DC blocking voltage per leg VF IR 1.10 1000 Electrical Characteristics TL=25℃ unless otherwise specified. KBL402 KBL404 KBL406 KBL408 KBL410 100 100 KBL401 KBL4005 C KBL Dim Min Max A 18.50 19.50 B 14.20 15.30 C 15.20 16.30 D E 4.60 5.60 G —2 . 1 0 H 14.50 — J 1.20 Ø 1.30 Ø All Dimensions in mm + AC - D 5.00 6.25 H G A B J 166 E

Electronic Co. Ltd Page: 2 of 5Date:2014/10/20 Rev.:AA RATINGANDCHARACTERISTICCURVES (TA=25°C(UNLESS OTHERWISE NOTED) I F T L , (°C) V F I R Fig.1-FORWARD CURRENT DERATING CURVE Fig.2-TYPEICAL FORWARD CHARACTERISTICS Fig.3-TYPICAL REVERSE CHARACTERISTICS Fig.4-TYPICAL JUNCTION CAPACITANCE V R C J Fig.5-MAX. NON-REPETITIVE SURGE CURRENT ,REVERSE VOLTAGE(V) ,JUNCTION CAPACITANCE(pF) FORWARD CURRENT(A) LEAD TEMPERATURE I F FORWARD CURRENT(A) ,FORWARD VOLTAGE(V) ,REVERSE CURRENT(mA) PERCENT OF RATED PEAK REVERSE VOLTAGE(%) NUMBER OF CYCLES AT60HZ PEAK FORWARD SURGE CURRENT(A) 1.0 2.0 3.0 4.0 50 100 1500 Single-Phase Half Wave 60Hz Resistive or Inductive Load BRIDGE RECTIFIERS KBL4005 THRU KBL410 120 150 http://www.nhel.com.cn

Page: 3 of 5Date:2014/10/20 Rev.:AA Production Data Sheet Niu Hang Electronic Co. Ltd ORDER INFORMATION

  • Packing information Product code Carton Size L×W×H (mm) Quantity (pcs/box) Quantity (box/carton) KBL4005 THRU KBL410 230×50×230500B/P Pack Box Size L×W×H (mm) 490×240×192 6 Thermal Characteristcs (Ratings at 25℃ ambient temperature unless otherwise specified ) Parameter Typical thermal resistance 1.PCB Mounted with The Suggested PAD Size R JC R JL 2.4 ℃/W Symbol UnitKBL -KBL BRIDGE RECTIFIERS KBL4005 THRU KBL410 http://www.nhel.com.cn

Recommended wave soldering condition Product Peak Temperature Soldering Time Pb-free devices 260 +0/-5 °C 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Sn-Pb eutectic Assembly Pb-free Assembly Average ramp-up rate (Tsmax to Tp) 3°C/second max. 3°C/second max. Preheat −Temperature Min(T S min) −Temperature Max(T S max) −Time(ts min to ts max 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Time maintained above: −Temperature (T L − Time (t L 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(T P Time within 5°C of actual peak temperature(tp) 10-30 seconds 20-40 seconds Ramp down rate 6°C/second max. 6°C/second max. Time 25 °C to peak temperature 6 minutes max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. Production Data Sheet Niu Hang Electronic Co. Ltd Page: 4 of 5Date:2014/10/20 Rev.:AA BRIDGE RECTIFIERS KBL4005 THRU KBL410 http://www.nhel.com.cn

Electronic Co. Ltd Page: 5 of 5Date:2014/10/20 Rev.:AA Disclaimer Reproducing and modifying informatiom of the document is prohibited without permission from niuhang Electronics co., LTD Niuhang Electronics co., LTD. reserves the rights to make changes of the content herein the document anytime without notification. use of any product including damages incidentally and consequentially occurred. Niuhang Electronics co., LTD. disclaims any and all liability arising out of the application or Niuhang Electronics co., LTD. does not assume any and all implied warranties, including warranties of fitness for particular purpose,non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Niuhang Electronics co., LTD.makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining,such as medical instruments.transportation equipment,aerospae machinery et cetera.Customers usin or selling these products for use in such applications do so at their own rish and agree to fully indemnify Niuhang Electronics co., LTD.for any damages resulting resulting from such improper use or sale. When the appearance of the product and chip size does not change, in order to product the customer. quality, change the internal structure and the production process Niuhang can not notify BRIDGE RECTIFIERS KBL4005 THRU KBL410 http://www.nhel.com.cn