JW030D-M GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

Features

n Small size: 61.0 mm x 57.9 mm x 12.7 mm n Low output noise n Constant frequency n Industry-standard pinout n Metal case n Case ground pin n 2:1 input voltage range n High efficiency: 83% typical n Overcurrent protection n Remote on/off n Remote sense n Adjustable output voltage: 80% to 110% of VO, nom n Output overvoltage protection n UL* 1950 Recognized, CSA† C22.2 No. 950-95 Certified, VDE 0805 (EN60950, IEC950) Licensed n CE mark meets 73/23/EEC and 93/68/EEC directives‡ n Within FCC Class A radiated limits

Applications

n Distributed power architectures n Communications equipment

Description

The JW030-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide precisely regulated outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of up to 30 W at a typical full-load efficiency of up to 83%. These power modules feature remote on/off, output sense (both negative and positive leads), and output volt- age adjustment, which allows output voltage adjustment from 80% to 110% for the JW030A-M, D-M, F-M, G-M and 60% to 110% for the JW030B-M, C-M of the nominal output voltage. For disk-drive applications, the JW030B-M Power Module provides a motor-start surge current of 3 A. The modules are PC board-mountable and encapsulated in metal cases. The modules are rated to full load at 100 °C case temperature. No external filtering is required. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. (The CE mark is placed on selected products.) Options n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins: 2.79 mm ± 0.25 mm n Short pins: 3.68 mm ± 0.25 mm

2 Lineage Power

periods can adversely affect device reliability. Table 1. Input Specifications CAUTION: This power module is not internally fused. An input line fuse must always be used. safety agencies require a normal-blow fuse with a maximum rating of 5 A (see Safety Considerations section). type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information.

Table 2. Output Specifications

44 Lineage Power

Table 3. Isolation Specifications Table 2. Output Specifications (continued)

March 26, 2008 36 Vdc to 75 Vdc Inputs; 30 W JW030-Series Power Modules: Feature Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See Feature Descriptions and Design Considerations for further information. Parameter Device Code or Code Suffix Symbol Min Typ Max Unit Remote On/Off (VI = 36 V to 75 V; open collector or equivalent compatible; signal referenced to VI(–) terminal. See Figure 23 and Feature Descriptions.): JW030x1-M Negative Logic: Logic Low—Module On Logic High—Module Off JW030x-M Positive Logic: Logic Low—Module Off Logic High—Module On Module Specifications: On/Off Current—Logic Low On/Off Voltage: Logic Low Logic High (I on/off = 0) Open Collector Switch Specifications: Leakage Current During Logic High (Von/off = 10 V) Output Low Voltage During Logic Low (Ion/off = 1 mA) Turn-on Time (@ 80% of IO, max; TA = 25 °C; VO within ±1% of steady state; see Figure 19.) Output Voltage Overshoot All All All All All All All I on/off Von/off Von/off Ion/off Von/off –0.7 1.0 1.2 1.2 150 mA V V µA V ms Output Voltage Sense Range All — — — 10 %V O, nom Output Voltage Set-point Adjustment Range (See Feature Descriptions.) D-M, G-M, F-M, A-M B-M, C-M 110 110 O, nom %VO, nom Output Overvoltage Protection (clamp) JW030D-M JW030G-M JW030F-M JW030A-M JW030B-M JW030C-M VO, clamp VO, clamp VO, clamp VO, clamp VO, clamp VO, clamp 2.5 2.9 4.0 5.6 13.5 17.0 4.0 3.8 5.7 7.0 16.0 20.0 V V V V V V

6 Lineage Power

36 Vdc to 75 Vdc Inputs; 30 W March 26, 2008

Figure 1. JW030-Series Typical Input Characteris- Figure 2. JW030 Family Typical Output Voltage Figure 3. JW030D-M Typical Output Figure 4. JW030G-M Typical Output

8 Lineage Power

Figure 9. JW030D-M Typical Converter Efficiency Figure 10. JW030G-M Typical Converter Efficiency Figure 11. JW030F-M Typical Converter Efficiency Figure 12. JW030A-M Typical Converter Efficiency

10 Lineage Power

Figure 17. JW030D-M, F-M, G-M Typical Output Figure 18. JW030A-M, B-M, C-M Typical Output Figure 19. Typical Output Voltage Start-Up when

Figure 20. Input Reflected-Ripple Test Setup 50 mm and 75 mm (2 in. and 3 in.) from the module. Figure 21. Peak-to-Peak Output Noise avoid measurement errors due to socket contact resistance. Figure 22. Output Voltage and Efficiency

75 Vdc), for the module's output to be considered

both the input and output pins are to be kept floating. voltages do not appear at the module's output. appear between the output pins and ground. mum 5 A normal-blow fuse in the ungrounded lead.

12 Lineage Power

current is brought back into its specified range. low voltage while sinking 1 mA. age current of the switch at Von/off = 6 V is 50 µA. Figure 23. Remote On/Off Implementation point adjustment (trim). See Figure 24. O(+) and SENSE(–) to VO(–) at the module. Figure 24. Effective Circuit Configuration for

14 Lineage Power

radiation to the surrounding environment. was used to collect data for Figure 34. on the particular application environment. The maximum case temperature of 100 °C must not be exceeded. Note: Dimensions are in millimeters and (inches). Figure 27. Thermal Test Setup result, full-load operation in natural convection at 50 °C can be achieved without the use of an external heat sink.

16 Lineage Power

Figure 32. JW030B-M Power Dissipation vs. Output Figure 33. JW030C-M Power Dissipation vs. Output Figure 34. Forced Convection Power Derating with Several heat sinks are available for these modules. not exceed 0.56 N-m (5 in./lb.).

Figure 35. Case-to-Ambient Thermal Resistance resistance (typically 0.1 °C/W to 0.3 °C/W). Power Modules (TN97-016EPS).

18 Lineage Power

March 26, 200836 Vdc to 75 Vdc Inputs; 30 W JW030-Series Power Modules: Outline Diagram Dimensions are in millimeters and (inches). 8-716(C) Top View Side View Bottom View 57.9 (2.28) MAX 61.0 (2.40) MAX VI(-) ON/ OFF CASE + SEN TRIM - SEN JW030A-M DC-DC Power Module 36-75V 0.95A IN 5V 6A OUT MADE IN USA VI(+) VO(-) VO(+) 0.51 (0.020) 5.1 (0.20) MIN 12.7 (0.50) MAX 1.02 (0.040) DIA SOLDER-PLATED BRASS ,ALL PINS 10.16 (0.400) 17.78 (0.700) 25.40 (1.000) 35.56 (1.400) MOUNTING INSERTS M3 x 0.5 THROUGH,

4 PLACES

10.16 (0.400) 25.40 (1.000) 50.8 (2.00) 35.56 (1.400) 5.1 (0.20) 12.7 (0.50) 4.8 (0.19) 48.26 (1.900) TERMINALS 48.3 (1.90) STANDOFF , 7.1 (0.28) 7.1 (0.28) MOUNTING HOLES

March 26, 2008 36 Vdc to 75 Vdc Inputs; 30 W JW030-Series Power Modules: Recommended Hole Pattern Component-side footprint. Dimensions are in millimeters and (inches). 8-716(C)

Ordering Information

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability. Table 4. Device Codes Table 5. Device Options

48 V 2 V 13 W Negative JW030D1-M 107670259

48 V 5 V 30 W Negative JW030A1-M 107587776

48 V 12 V 30 W Negative JW030B1-M 107587818

48 V 15 V 30 W Negative JW030C1-M 107587834

48 V 2 V 13 W Positive JW030D-M 107587842

48 V 5 V 30 W Positive JW030A-M 107584278

48 V 12 V 30 W Positive JW030B-M 107587800

48 V 15 V 30 W Positive JW030C-M 107587826

4 PLACES (OPTIONAL)MODULE OUTLINE

3000 Skyline Drive, Mesquite, TX 75149, USA

app li cati on. No rig hts unde r any pate nt acco mpa ny the sal e of a ny su ch p ro duct(s) or i nformatio n. © 20 08 Li neag e Power Corpo ra tion , (Mesqui te, Te xas) All Intern ation al Ri ght s Re se rve d. Figure 36. Longitudinal Heat Sink Figure 37. Transverse Heat Sink Table 6. Device Accessories Note: Dimensions are in millimeters and (inches).