J111 CALOGIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
J111 - J113 / SST111 – SST113
FEATURES
- • Low Cost
- • Automated Insertion Package
- • Low Insertion Loss
- • No Offset or Error Voltage Generated By Closed Switch -Purely Resistive -High Isolation Resistance From Driver
- • Fast Switching
- • Short Sample and Hold Aperture Time
APPLICATIONS
- • Analog Switches
- • Choppers
- • Commutators ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Derate above 25 NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
Part Package Temperature Range J111-113 Plastic SOT-23 -55 oC to +135oC SST111-113 Plastic SOT-23 -55 oC to +135oC For Sorted Chips in Carriers see 2N4391 series. CORPORATION PIN CONFIGURATION 5001 ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL PARAMETER 111 112 113 UNITS TEST CONDITIONSMIN TYP MAX MIN TYP MAX MIN TYP MAX IGSSR Gate Reverse Current (Note 1) -1 -1 -1 nA V DS = 0V, VGS = -15V VGS(off) Gate Source Cutoff Voltage -3 -10 -1 -5 -0.5 -3 V VDS = 5V, ID = 1µA BV GSS Gate Source Breakdown Voltage -35 -35 -35 V DS = 0V, IG = -1µA IDSS Drain Saturation Current (Note 2) 20 5 2 mA V DS = 15V, VGS = 0V ID(off) Drain Cutoff Current (Note 1) 1 1 1 nA V DS = 5V, VGS = -10V rDS(on) Drain Source ON Resistance 30 50 100 Ω VDS = 0.1V, VGS = 0V C dg(off) Drain Gate OFF Capacitance 5 5 5 pF VDS = 0, VGS = -10V (Note 3) f = 1MHzC sg(off) Source Gate OFF Capacitance 5 5 5 C dg(on) + Csg(on) Drain Gate Plus Source Gate ON Capacitance 28 28 28 VDS = VGS = 0 (Note 3) td(on) Turn On Delay Time 7 7 7 ns Switching Time Test Conditions (Note 3) J111 J112 J113 VDD 10V 10V 10V VGS(off)-12V -7V -5V R L 0.8kΩ 1.6kΩ 3.2kΩ tr Rise Time 6 6 6 td(off) Turn Off Delay Time 20 20 20 tf Fall Time 15 15 15 NOTES: 1. Approximately doubles for every 10oC increase in TA. 2.Pulse test duration 300µs; duty cycle ≤3%. 3.For design reference only, not 100% tested. SOT-23 G S D TO-92 S GD PRODUCT MARKING (SOT-23) SST111 111 SST112 112 SST113 113 CALOGIC CORPORATION , 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076