IZ0505S

IZ0503SA XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

3 Watts

• Regulated Single & Dual Output
• Wide 2:1 Input Range
• SIP Package
• 1600 VDC Isolation
• Optional Metal Case
• Continuous Short Circuit Protection
• MTBF >2.4 MHrs IZ Series Input Input Voltage Range • 5 V models: 4.5 - 9.0 V 12 V models: 9.0 - 18.0 V 24 V models: 18.0 - 36.0 V 48 V models: 36.0 - 72.0 V Input Reflected Ripple• 35 mA pk-pk through 12 µH inductor

5 Hz to 20 MHz

Input Current • See table Input Filter • Capacitor Output Output Voltage • See table Line Regulation • ±0.5% max Load Regulation • ±1.0% max from 25-100% load Setpoint Accuracy • ±1% max Start Up Rise Time • 20 ms typical Ripple & Noise • 75 mV pk-pk max 20 MHz BW Temperature Coefficient• 0.02%/°C Short Circuit Protection• Continuous with auto recovery Cross Regulation • ±5% on dual output models Transient Response • ±3% deviation recovering to <1% within 300 µs for 25% load change Maximum Capacitive • See table Load Remote On/Off • Applying 5 V via 1 kΩcurrent limiting resistor (with respect to -V Input) turns output off General Efficiency • See table Isolation Voltage • 1600 VDC, Isolation Resistance • 10 9Ω Isolation Capacitance• 680 pF typical Switching Frequency • 100-650 kHz MTBF • >2.4 MHrs to MIL-STD-217F Physical Case Material • Non-conductive black plastic (UL94V-0 rated). Optional metal: nickel coated copper (see note 2) Pin Material • C5191R-H solder coated Potting Material • Epoxy (UL94V-0 rated) Lead Soldering • 260 ºC 1.5 mm from case for 10 s Temperature Environmental Operating Temperature• -40 °C to +70 °C, derate from 100% load at 70 ºC to 0% load at 100 ºC Storage Temperature • -40 °C to +125 °C Case Temperature • 100 °C max Cooling • Convection-cooled Humidity • 95% RH, non condensing xppower.com

Input Voltage No Load Input Current(1) Full Load Input Current(1) Output Voltage Output Current Efficiency Max Capactive Load Model Number (2) 4.5-9.0 V 65 mA 640 mA 3.3 V 700 mA 74% 2000 µF IZ0503SA 70 mA 800 mA 5.0 V 600 mA 76% 1000 µF IZ0505SA 75 mA 750 mA 12.0 V 250 mA 82% 470 µF IZ0512SA 75 mA 750 mA 15.0 V 200 mA 82% 220 µF IZ0515SA 90 mA 800 mA ±5.0 V ±300 mA 77% ±470 µF IZ0505S 90 mA 760 mA ±12.0 V ±125 mA 81% ±220 µF IZ0512S 90 mA 750 mA ±15.0 V ±100 mA 82% ±100 µF IZ0515S 9.0-18.0 V 25 mA 260 mA 3.3 V 700 mA 76% 2000 µF IZ1203SA 15 mA 320 mA 5.0 V 600 mA 81% 1000 µF IZ1205SA 35 mA 305 mA 12.0 V 250 mA 84% 470 µF IZ1212SA 35 mA 305 mA 15.0 V 200 mA 84% 220 µF IZ1215SA 45 mA 320 mA ±5.0 V ±300 mA 80% ±470 µF IZ1205S 45 mA 308 mA ±12.0 V ±125 mA 83% ±220 µF IZ1212S 45 mA 312 mA ±15.0 V ±100 mA 82% ±100 µF IZ1215S 18.0-36.0 V 15 mA 133 mA 3.3 V 700 mA 74% 2000 µF IZ2403SA 15 mA 160 mA 5.0 V 600 mA 79% 1000 µF IZ2405SA 20 mA 156 mA 12.0 V 250 mA 82% 470 µF IZ2412SA 20 mA 152 mA 15.0 V 200 mA 84% 220 µF IZ2415SA 20 mA 160 mA ±5.0 V ±300 mA 80% ±470 µF IZ2405S 20 mA 154 mA ±12.0 V ±125 mA 83% ±220 µF IZ2412S 20 mA 154 mA ±15.0 V ±100 mA 83% ±100 µF IZ2415S 36.0-72.0 V 10 mA 66 mA 3.3 V 700 mA 75% 2000 µF IZ4803SA 10 mA 82 mA 5.0 V 600 mA 78% 1000 µF IZ4805SA 15 mA 78 mA 12.0 V 250 mA 81% 470 µF IZ4812SA 15 mA 78 mA 15.0 V 200 mA 81% 220 µF IZ4815SA 15 mA 82 mA ±5.0 V ±300 mA 78% ±470 µF IZ4805S 20 mA 80 mA ±12.0 V ±125 mA 80% ±220 µF IZ4812S 15 mA 78 mA ±15.0 V ±100 mA 81% ±100 µF IZ4815S Mechanical Details 0.86 (21.85) 0.42 (10.66) 0.02 (0.50) 0.10 (2.54) 0.70 (17.78) 0.12 (3.05) 0.44 (11.10) 0.36 (9.20) 0.36 (9.20) 0.14 (3.50) 0.02 (0.50) 0.01 (0.25) 1 2 3 5 67 8 0.86 (21.85) 0.42 (10.60) 0.02 (0.50) 0.10 (2.54) 0.12 (3.05)0.70 (17.78) 0.36 (9.20) 0.44 (11.10) Printed Face 0.01 (0.25)0.02 (0.50) 0.36 (9.20) 0.14 (3.50) 1 2 3 56 7 8 Bottom View PIN CONNECTIONS Pin Single Dual 1 -V Input -V Input 2 +V Input +V Input

3 Remote On/Off Remote On/Off

5 N.C. N.C. 6 +V Output +V Output 7 -V Output Common

8 NC -V Output

Dimensions are in inches (mm) Weight: Plastic case = 4.5 g Metal case = 6.5 g DC-DC IZModels and Ratings Notes 1. Measured at nominal input voltage. 2. For optional metal case, add suffix ‘-M’ to model number. 3. Minimum load of 25% required to meet quoted specifications.