IW0505SA

IW0503SA XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

1 Watts

• Regulated Single & Dual Output
• Wide 2:1 Input Range
• SIP or DIP Package
• 1000 VDC Isolation
• Optional 3000 VDC Isolation
• Continuous Short Circuit Protection
• MTBF >2.7 MHrs IW Series Input Input Voltage Range • 5 V models: 4.5 - 9.0 V 12 V models: 9.0 - 18.0 V 24 V models: 18.0 - 36.0 V 48 V models: 36.0 - 72.0 V Input Reflected Ripple • 35 mA pk-pk through 12 µH inductor

5 Hz to 20 MHz

Input Current • See table Input Filter • Capacitor Output Output Voltage • See table Line Regulation • ±0.5% max Load Regulation • ±1.0% max from 25-100% load Setpoint Accuracy • ±2% max Start Up Rise Time • 100 ms typical Ripple & Noise • 80 mV pk-pk max 20 MHz BW. See note 6 Temperature Coefficient • 0.02%/°C Short Circuit Protection • Continuous with auto recovery Current Limiting • Typically 110% of max Iout Cross Regulation • ±5% Transient Response • ±3% deviation recovering to <1% within 300 µs for 25% load change Maximum Capacitive • See table Load Remote On/Off • Optional on SIP package models applying 5 V via 1 kΩ current limiting resistor & diode turns output off (see note 4) General Efficiency • See table Isolation Voltage • 1000 VDC, optional 3000 VDC (see note 2) Isolation Resistance •1 0 9 Ω Isolation Capacitance • 60 pF typical Switching Frequency • 100-650 kHz typical MTBF • >2.7 MHrs to MIL-STD-217F Physical Case Material • Non-conductive black plastic (UL94V-0 rated). Optional metal: nickel coated copper Pin Material • SIP case: Alloy 42 solder coated DIP case: ø0.5 mm brass solder coated Potting Material • Epoxy (UL94V-0 rated) Lead Soldering • 260 ºC 1.5 mm from case for 10 s Temperature Environmental Operating Temperature • -40 °C to +85 °C, derate from 100% load at 85 ºC to 0% load at 100 ºC Storage Temperature • -40 °C to +125 °C Case Temperature • 100 °C max Cooling • Convection-cooled Humidity • 95% RH, non condensing xppower.com

0.92 (23.40) 0.55 (14.00) 0.12 (3.05) 0.40 (10.16) DIA. 0.02 (0.50) 0.70 (17.78) 0.11 (2.81) 0.08 (1.92) 0.42 (10.60) 0.08 (1.92) 0.10 (2.54) 0.20 (5.08) 0.02 (0.50) 0.02 (0.50) 1 2 6 8 16 15 11 9 Bottom View 0.92 (23.40) 0.55 (14.00) 0.12 (3.05) 0.40 (10.16) DIA. 0.02 (0.50) 0.02 (0.50) 0.02 (0.50) 0.20 (5.08) 0.10 (2.54) 0.08 (1.92) 0.40 (10.16) 0.08 (1.92) 0.11 (2.81) 0.70 (17.78) 1 2 6 8 Bottom View 16 15 11 9 07-Apr-08 Input Voltage No Load Input Current Full Load Input Current Output Voltage Output Current Efficiency Max Capactive load Model Number(1-6) Single Output Dual Output 4.5-9.0 V 15 mA 298 mA 3.3 V 303 mA 67% 3300 µF ±1000 µF IW0503SA 15 mA 298 mA 5.0 V 200 mA 67% 3300 µF ±1000 µF IW0505SA 40 mA 285 mA 9.0 V 111 mA 70% 470 µF ±220 µF IW0509SA 55 mA 285 mA 12.0 V 83 mA 70% 470 µF ±220 µF IW0512SA 55 mA 285 mA 15.0 V 67 mA 70% 470 µF ±220 µF IW0515SA 70 mA 294 mA 24.0 V 42 mA 68% 220 µF ±100 µF IW0524SA 9.0-18.0 V 15 mA 119 mA 3.3 V 303 mA 70% 3300 µF ±1000 µF IW1203SA 15 mA 115 mA 5.0 V 200 mA 72% 3300 µF ±1000 µF IW1205SA 15 mA 115 mA 9.0 V 111 mA 77% 470 µF ±220 µF IW1209SA 15 mA 108 mA 12.0 V 83 mA 77% 470 µF ±220 µF IW1212SA 15 mA 108 mA 15.0 V 67 mA 77% 470 µF ±220 µF IW1215SA 15 mA 114 mA 24.0 V 42 mA 73% 220 µF ±100 µF IW1224SA 18.0-36.0 V 8 mA 59 mA 3.3 V 303 mA 70% 3300 µF ±1000 µF IW2403SA 8 mA 57 mA 5.0 V 200 mA 72% 3300 µF ±1000 µF IW2405SA 8 mA 55 mA 9.0 V 111 mA 75% 470 µF ±220 µF IW2409SA 8 mA 55 mA 12.0 V 83 mA 75% 470 µF ±220 µF IW2412SA 8 mA 55 mA 15.0 V 67 mA 75% 470 µF ±220 µF IW2415SA 8 mA 55 mA 24.0 V 42 mA 75% 220 µF ±100 µF IW2424SA 36.0-72.0 V 6 mA 31 mA 3.3 V 303 mA 66% 3300 µF ±1000 µF IW4803SA 6 mA 30 mA 5.0 V 200 mA 68% 3300 µF ±1000 µF IW4805SA 6 mA 29 mA 9.0 V 111 mA 70% 470 µF ±220 µF IW4809SA 6 mA 29 mA 12.0 V 83 mA 70% 470 µF ±220 µF IW4812SA 6 mA 29 mA 15.0 V 67 mA 70% 470 µF ±220 µF IW4815SA 6 mA 30 mA 24.0 V 42 mA 68% 220 µF ±100 µF IW4824SA Mechanical Details 0.86 (21.85) 0.44 (11.10) 0.02 (0.50) 0.10 (2.54) 0.70 (17.78) 0.12 (3.05) 0.44 (11.10) 0.36 (9.20) 0.36 (9.20) 0.14 (3.50) 0.02 (0.50) 0.01 (0.25) 1 2 3 5 67 8 0.86 (21.85) 0.42 (10.60) 0.02 (0.50) 0.10 (2.54) 0.12 (3.05)0.70 (17.78) 0.36 (9.20) 0.44 (11.10) Printed Face 0.01 (0.25)0.02 (0.50) 0.36 (9.20) 0.14 (3.50) 1 2 3 56 7 8 Bottom View PIN CONNECTIONS Pin Single Dual 1 -V Input -V Input 2 +V Input +V Input 3 Opt. ROF* Opt. ROF** 6 +V Output +V Output 7 -V Output -V Output

8 NC Common

6 NC Common

8 NC -V Output

Dimensions are in inches (mm) Weight: Plastic case = 4.5 g Metal case = 6.5 g Dimensions are in inches (mm) Weight: Plastic case = 6.0 g Metal case = 8.0 g *When optional ROF is present pin 5 is No Connection. When not present pin 3 & 5 are No Pin. **When optional ROF is present pin 5 is No Connection. When not present pin 3 & 5 are No Connection. DC-DC IWModels and Ratings Notes 1. For dual inline package replace ‘S’ in model number with ‘D’. 2. For optional 3 kV isolation add suffix ‘-H’ to the model number. 3. For dual output delete suffix ‘A’ & split output currents equally between rails. 4. For optional Remote On/Off on SIP models, add suffix ‘-R’ to model number. 5. For optional metal case, add suffix ‘-M’ to model number. 6. Output capacitor of 100 µF required to meet quoted ripple & noise. 7. Minimum load of 25% required to meet quoted specifications.