IPB04CN10NG INFINEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • N-channel, normal level
  • Excellent gate charge x R DS(on) product (FOM)
  • Very low on-resistance R DS(on)
  • 175 °C operating temperature
  • Pb-free lead plating; RoHS compliant
  • Qualified according to JEDEC1) for target application
  • Ideal for high-frequency switching and synchronous rectification
  • Halogen-free according to IEC61249-2-21 Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Unit Continuous drain current I D T C=25 °C2) 100 A T C=100 °C 100 Pulsed drain current3) I D,pulse T C=25 °C 400 Avalanche energy, single pulse E AS I D=100 A, R GS=25 Ω 1000 mJ Gate source voltage 4) V GS ±20 V Power dissipation P tot T C=25 °C 300 W Operating and storage temperature T j, T stg -55 ... 175 °C IEC climatic category; DIN IEC 68-1 55/175/56 Value V DS 100 V R DS(on),max (TO 263) 3.9 mΩ I D 100 A Product Summary Type IPB04CN10N G IPI04CN10N G IPP04CN10N G Marking 04CN10N 04CN10N 04CN10N Rev. 1.4 page 1 2010-01-13

Parameter Symbol Conditions Unit min. typ. max. Thermal characteristics Thermal resistance, junction - case R thJC - - 0.5 K/W Thermal resistance, R thJA minimal footprint - - 62 junction - ambient 6 cm2 cooling area5) -- 4 0 Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA 100 - - V Gate threshold voltage V GS(th) V DS=V GS, I D=250 µA 234 Zero gate voltage drain current I DSS V DS=80 V, V GS=0 V, T j=25 °C - 0.1 1 µA V DS=80 V, V GS=0 V, T j=125 °C - 10 100 Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 1 100 nA Drain-source on-state resistance R DS(on) V GS=10 V, I D=100 A - 3.5 4.2 mΩ V GS=10 V, I D=100 A, TO263 - 3.2 3.9 Gate resistance R G - 1.3 - Ω Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=100 A 83 165 - S 1)J-STD20 and JESD22 5) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Values 4) Tjmax=150 °C and duty cycle D=0.01 for Vgs<-5V 2) Current is limited by bondwire; with an R thJC=0.5 K/W the chip is able to carry 182 A. 3) See figure 3 Rev. 1.4 page 2 2010-01-13

Parameter Symbol Conditions Unit min. typ. max. Dynamic characteristics Input capacitance C iss - 10400 13800 pF Output capacitance C oss - 1590 2110 Reverse transfer capacitance C rss - 86 129 Turn-on delay time t d(on) -3 4 5 1 n s Rise time t r - 78 117 Turn-off delay time t d(off) - 76 114 Fall time t f -2 5 3 8 Gate Charge Characteristics6) Gate to source charge Q gs -5 2 7 0 n C Gate to drain charge Q gd -3 7 5 5 Switching charge Q sw -5 8 8 3 Gate charge total Q g - 158 210 Gate plateau voltage V plateau - 5.0 - V Output charge Q oss V DD=50 V, V GS=0 V - 168 223 nC Reverse Diode Diode continous forward current I S - - 100 A Diode pulse current I S,pulse - - 400 Diode forward voltage V SD V GS=0 V, I F=100 A, T j=25 °C - 1.0 1.2 V Reverse recovery time t rr - 100 - ns Reverse recovery charge Q rr - 300 - nC 6) See figure 16 for gate charge parameter definition V R=50 V, I F=I S, di F/dt =100 A/µs T C=25 °C Values V GS=0 V, V DS=50 V, f =1 MHz V DD=50 V, V GS=10 V, I D=50 A, R G=1.6 Ω V DD=50 V, I D=100 A, V GS=0 to 10 V Rev. 1.4 page 3 2010-01-13

1 Power dissipation 2 Drain current

P tot=f(T C) I D=f(T C); V GS≥10 V 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 1 µs 10 µs 100 µs 1 ms10 ms DC 10310210110010-1 103 102 101 100 V DS [V] I D [A] limited by on-state resistance single pulse 0.01 0.02 0.05 0.1 0.2 0.5 10010-110-210-310-410-5 100 10-1 10-2 10-3 t p [s] Z thJC [K/W] 100 150 200 250 300 350 0 50 100 150 200 T C [°C] P tot [W] 100 120 0 50 100 150 200 T C [°C] I D [A] Rev. 1.4 page 4 2010-01-13

5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 4.5 V 5 V 5.5 V 6 V 10 V 0 50 100 150 I D [A] R DS(on) [mΩ] 25 °C175 °C 100 150 200 250 300 02468 V GS [V] I D [A] 120 160 200 0 50 100 150 I D [A] g fs [S] 4.5 V 5 V 5.5 V 6 V 6.5 V 7 V

8 V10 V

V DS [V] I D [A] Rev. 1.4 page 5 2010-01-13

9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=100 A; V GS=10 V V GS(th)=f(T j); V GS=V DS parameter: I D 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j typ 98 % -60 -20 20 60 100 140 180 T j [°C] R DS(on) [mΩ] 250 µA 2500 µA 0.5 1.5 2.5 3.5 -60 -20 20 60 100 140 180 T j [°C] V GS(th) [V] Ciss Coss Crss 105 104 103 102 101 0 2 04 06 08 0 V DS [V] C [pF] 25 °C 175 °C 25 °C, 98% 175 °C, 98% 103 102 101 100 0 0.5 1 1.5 2 V SD [V] I F [A] Rev. 1.4 page 6 2010-01-13

13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=100 A pulsed parameter: T j(start) parameter: V DD

15 Drain-source breakdown voltage 16 Gate charge waveforms

V BR(DSS)=f(T j); I D=1 mA 20 V 50 V 80 V 0 50 100 150 200 Q gate [nC] V GS [V] 100 105 110 115 -60 -20 20 60 100 140 180 T j [°C] V BR(DSS) [V] V GS Q gate V gs(t h ) Q g(th) Q gs Q gd Q sw Q g 25 °C 100 °C 150 °C 100 1000 1 10 100 1000 t AV [µs] I AS [A] Rev. 1.4 page 7 2010-01-13

PG-TO220-3: Outline Rev. 1.4 page 8 2010-01-13

Rev. 1.4 page 9 2010-01-13

PG-TO-263 (D²-Pak) Rev. 1.4 page 10 2010-01-13

81726 Munich, Germany

© 2007 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typica values stated herein and/or any information regarding the application of the device Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the use or other persons may be endangered. Rev. 1.4 page 11 2010-01-13