IPP020N03LF2S INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
Qualified according to JEDEC Standard Table 1 Key Performance Parameters Parameter Value Unit V 30 V R 2.05 mΩ I 125 A Q 54 nC Q (0V..4.5V) 33 nC PG‑TO220‑3 Type/Ordering Code Package Marking Related Links IPP020N03LF2S PG‑TO220‑3 020N03F2 ‑ Optimized for a wide range of applications• N‑channel, logic level• 100% avalanche tested• 175°C rated• Pb‑free lead plating; RoHS compliant• Halogen‑free according to IEC61249‑2‑21• DS DS(on),max D oss G Public IPP020N03LF2S Final datasheet tab Drain Pin 2, Tab Gate Pin 1 Source Pin 3
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 2 Revision 2.1 https://www.infineon.com 2024‑05‑28 Table of Contents
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 3 Revision 2.1 https://www.infineon.com 2024‑05‑28
1 Maximum ratings
at =25 °C, unless otherwise specifiedT Table 2 Maximum ratings Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Continuous drain current 1) I ‑ ‑ 125 A V =10 V, =25 °C T =10 V, =100 °C V T Pulsed drain current 3) I ‑ ‑ 500 A T =25 °C Avalanche energy, single pulse 4) E ‑ ‑ 338 676 mJ I =70 A, =25 Ω R =35 A, =25 ΩI R Gate source voltage V ‑20 ‑ 20 V ‑ Power dissipation P ‑ ‑ 136 3.8 W T =25 °C Operating and storage temperature T, T ‑55 ‑ 175 °C ‑ Rating refers to the product only with datasheet specified absolute maximum values, maintaining case temperature as 1) specified. For other case temperatures please refer to Diagram 2. De‑rating will be required based on the actual environmental conditions. Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm (one layer, 70 μm thick) copper area for drain connection. PCB 2) 2 is vertical in still air. See Diagram 3 for more detailed information3) See Diagram 13 for more detailed information4) A D GS C GS C GS A THJA D,pulse C AS D GS D GS GS tot C A THJA j stg
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 4 Revision 2.1 https://www.infineon.com 2024‑05‑28
2 Thermal characteristics
Table 3 Thermal characteristics Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Thermal resistance, junction ‑ case R ‑ ‑ 1.1 °C/W ‑ Thermal resistance, junction ‑ ambient, 6 cm² cooling area 5) R ‑ ‑ 40 °C/W ‑ Thermal resistance, junction ‑ ambient, minimal footprint R ‑ ‑ 62 °C/W ‑ Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm (one layer, 70 μm thick) copper area for drain connection. PCB 5) 2 is vertical in still air. thJC thJA thJA
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 5 Revision 2.1 https://www.infineon.com 2024‑05‑28
3 Electrical characteristics
at =25 °C, unless otherwise specifiedT Table 4 Static characteristics Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Drain‑source breakdown voltage V 30 ‑ ‑ V V =0 V, =2 mAI Gate threshold voltage V 1.35 1.85 2.35 V V = , =80 μAV I Zero gate voltage drain current I ‑ 0.1 100 μA V =30 V, =0 V, =25 °C V T =30 V, =0 V, =125 °CV V T Gate‑source leakage current I ‑ 10 100 nA V =20 V, =0 VV Drain‑source on‑state resistance 6) R ‑ 1.76 2.1 2.05 3.0 mΩ V =10 V, =70 A I =4.5 V, =35 AV I Gate resistance R ‑ 2.3 ‑ Ω ‑ Transconductance 7) g 100 ‑ ‑ S | |≥2| | , =70 AV I R I R is specified at a distance of 1.8 mm distance to the package body; mounting at a larger distance increases the overall 6) package resistance of approximately 0.04 mOhm/mm per leg. Defined by design. Not subject to production test.7) Table 5 Dynamic characteristics Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Input capacitance C ‑ 4700 ‑ pF V =0 V, =15 V, =1 MHzV f Output capacitance C ‑ 910 ‑ pF V =0 V, =15 V, =1 MHzV f Reverse transfer capacitance C ‑ 235 ‑ pF V =0 V, =15 V, =1 MHzV f Turn‑on delay time t ‑ 22 ‑ ns V =15 V, =4.5 V, =70 A, V I =1.6 ΩR Rise time t ‑ 70 ‑ ns V =15 V, =4.5 V, =70 A, V I =1.6 ΩR Turn‑off delay time t ‑ 28 ‑ ns V =15 V, =4.5 V, =70 A, V I =1.6 ΩR Fall time t ‑ 13 ‑ ns V =15 V, =4.5 V, =70 A, V I =1.6 ΩR Table 6 Gate charge characteristics 8) Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Gate to source charge Q ‑ 15 ‑ nC V =15 V, =70 A, =0 to 4.5 VI V Gate charge at threshold Q ‑ 8.6 ‑ nC V =15 V, =70 A, =0 to 4.5 VI V Gate to drain charge Q ‑ 10 ‑ nC V =15 V, =70 A, =0 to 4.5 VI V j (BR)DSS GS D GS(th) DS GS D DSS DS GS j DS GS j GSS GS DS DS(on) GS D GS D G fs DS D DS(on)max D DS(on) iss GS DS oss GS DS rss GS DS d(on) DD GS D G,ext r DD GS D G,ext d(off) DD GS D G,ext f DD GS D G,ext gs DD D GS g(th) DD D GS gd DD D GS
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 6 Revision 2.1 https://www.infineon.com 2024‑05‑28 Table 6 Gate charge characteristics 8) Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Switching charge Q ‑ 17 ‑ nC V =15 V, =70 A, =0 to 4.5 VI V Gate charge total 9) Q ‑ 33 50 nC V =15 V, =70 A, =0 to 4.5 VI V Gate plateau voltage V ‑ 3.3 ‑ V V =15 V, =70 A, =0 to 4.5 VI V Gate charge total 9) Q ‑ 69 104 nC V =15 V, =70 A, =0 to 10 VI V Gate charge total, sync. FET 9) Q ‑ 29 ‑ nC V =0.1 V, =0 to 4.5 VV Output charge 9) Q ‑ 54 ‑ nC V =15 V, =0 VV See "Gate charge waveforms" for parameter definition8) Defined by design. Not subject to production test.9) Table 7 Reverse diode Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Diode continuous forward current I ‑ ‑ 96 A T =25 °C Diode pulse current I ‑ ‑ 500 A T =25 °C Diode forward voltage V ‑ 0.85 1.0 V V =0 V, =70 A, =25 °CI T Reverse recovery time t ‑ 20 ‑ ns V =15 V, =70 A, d /d =500 A/μsI i t Reverse recovery charge Q ‑ 63 ‑ nC V =15 V, =70 A, d /d =500 A/μsI i t sw DD D GS g DD D GS plateau DD D GS g DD D GS g(sync) DS GS oss DS GS S C S,pulse C SD GS F j rr R F F rr R F F
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 7 Revision 2.1 https://www.infineon.com 2024‑05‑28
4 Electrical characteristics diagrams
Diagram 1: Power dissipation Diagram 2: Drain current P =f( )T I =f( ); ≥10 VT V Diagram 3: Safe operating area Diagram 4: Max. transient thermal impedance I =f( ); =25 °C; =0; parameter: V T D t Z =f( ); parameter: = /t D t T tot C D C GS D DS C p thJC p p 0 25 50 75 100 125 150 175 200 TC [°C] 100 125 150Ptot [W] 0 25 50 75 100 125 150 175 200 TC [°C] 100 125 150ID [A] 10 1 100 101 102 VDS [V] 10 1 100 101 102 103 ID [A] 1 µs 10 µs 100 µs 1 ms 10 ms DC 10 6 10 5 10 4 10 3 10 2 10 1 100 tp [s] 10 3 10 2 10 1 100 101 ZthJC [K/W] single pulse 0.01 0.02 0.05 0.1 0.2 0.5
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 8 Revision 2.1 https://www.infineon.com 2024‑05‑28 Diagram 5: Typ. output characteristics Diagram 6: Typ. drain‑source on resistance I =f( ), =25 °C; parameter: V T V R =f( ), =25 °C; parameter: I T V Diagram 7: Typ. transfer characteristics Diagram 8: Typ. drain‑source on resistance I =f( ), | |>2| | ; parameter: V V I R T R =f( ), =70 A; parameter: V I T D DS j GS DS(on) D j GS D GS DS D DS(on)max j DS(on) GS D j VDS [V] 100 200 300 400 500ID [A] 3.5 V 4 V
4.5 V5 V
ID [A] 1.5 2.0 2.5 3.0 3.5 RDS(on) [m ] 3.5 V 4 V 4.5 V 5 V 6 V 10 V 0 1 2 3 4 5 VGS [V] 100 200 300 400 500ID [A] 25 °C175 °C 0 2 4 6 8 10 12 14 16 VGS [V] 1.5 2.0 2.5 3.0 3.5 4.0 4.5 RDS(on) [m ] 25 °C 175 °C
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 9 Revision 2.1 https://www.infineon.com 2024‑05‑28 Diagram 9: Normalized drain‑source on resistance Diagram 10: Typ. gate threshold voltage R =f( ), =70 A, =10 VT I V V =f( ), = ; parameter: T V V I Diagram 11: Typ. capacitances Diagram 12: Forward characteristics of reverse diode C=f( ); =0 V; =1 MHzV V f I =f( );V parameter: T DS(on) j D GS GS(th j GS DS D DS GS F SD j -75 -50 -25 0 25 50 75 100 125 150 175 200 Tj [°C] 0.4 0.8 1.2 1.6 2.0 RDS(on) (normalized to 25 °C) -75 -50 -25 0 25 50 75 100 125 150 175 200 Tj [°C] 0.0 0.4 0.8 1.2 1.6 2.0 2.4 VGS(th) [V] 80 µA 800 µA 0 5 10 15 20 25 30 VDS [V] 102 103 104 C [pF] Ciss Coss Crss VSD [V] 100 101 102 103 IF [A] 25 °C 175 °C
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 10 Revision 2.1 https://www.infineon.com 2024‑05‑28 Diagram 13: Avalanche characteristics Diagram 14: Typ. gate charge I =f( ); =25 Ω; parameter: t R T V =f( ), =70 A pulsed, =25 °C; parameter: Q I T V Diagram 15: Drain‑source breakdown voltage Gate charge waveforms V =f( ); =2 mAT I ‑ AS AV GS j,start GS gate D j DD BR(DSS) j D 100 101 102 103 tAV [µs] 100 101 102 IAV [A] 25 °C 100 °C 150 °C 0 10 20 30 40 50 60 70 80 Qgate [nC] 10VGS [V] 6 V 15 V 24 V -75 -50 -25 0 25 50 75 100 125 150 175 200 Tj [°C] VBR(DSS) [V] G a t e c h a r g e w a v e f o r m s
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 11 Revision 2.1 https://www.infineon.com 2024‑05‑28
5 Package Outlines
Figure 1 Outline PG‑TO220‑3, dimensions in mm DIMENSIONSMIN.MAX.MILLIMETERSPG-TO220-3-U05PACKAGE - GROUPNUMBER: A2bDcEeLQøPL1 AA1 2.922.47 2.54 14.320.360.71 9.90 3.562.543.5413.00 8.390.970.6115.80 2.943.904.0614.40 10.679.20
StrongIRFET™2 Power‑Transistor , 30 V IPP020N03LF2S Public Datasheet 12 Revision 2.1 https://www.infineon.com 2024‑05‑28 IPP020N03LF2S Revision 2024‑05‑29, Rev. 2.1 Previous Revision Revision Date Subjects (major changes since last revision) 2.0 2024‑05‑24 Release of final 2.1 2024‑05‑29 Updated typo in Product Validation Trademarks All referenced product or service names and trademarks are the property of their respective owners. We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: erratum@infineon.com Published by Infineon Technologies AG
81726 München, Germany
© 2024 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non‑infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www. infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. The Infineon Technologies component described in this Data Sheet may be used in life‑support devices or systems and/or automotive, aviation and aerospace applications or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life‑support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.