IPD50N06S3-07 INFINEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • N-channel - Normal Level - Enhancement mode
  • Automotive AEC Q101 qualified
  • MSL1 up to 260°C peak reflow
  • 175°C operating temperature
  • Green package (RoHS compliant)
  • Ultra low Rds(on)
  • 100% Avalanche tested Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Unit Continuous drain current1) I D T C=25 °C, V GS=10 V 50 A T C=100 °C, V GS=10 V2) 50 Pulsed drain current2) I D,pulse T C=25 °C 200 Avalanche energy, single pulse2) E AS I D=25 A, 710 mJ Avalanche current, single pulse I AS 50 A Gate source voltage3) V GS ±20 V Power dissipation P tot T C=25 °C 136 W Operating and storage temperature T j, T stg -55 ... +175 °C IEC climatic category; DIN IEC 68-1 55/175/56 Value V DS 55 V R DS(on),max 6.9 mΩ I D 50 A Product Summary PG-TO252-3-11 Type Package Marking IPD50N06S3-07 PG-TO252-3-11 3N0607 Rev. 1.2 page 1 2009-06-15

Parameter Symbol Conditions Unit min. typ. max. Thermal characteristics2) Thermal resistance, junction - case R thJC - - 1.1 K/W SMD version, device on PCB R thJA minimal footprint - - 62 6 cm2 cooling area4) -- 4 0 Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D= 1 mA 55 - - V Gate threshold voltage V GS(th) V DS=V GS, I D=80 µA 2.1 3.0 4 Zero gate voltage drain current I DSS V DS=55 V, V GS=0 V, T j=25 °C - 0.01 1 µA V DS=55 V, V GS=0 V, T j=125 °C2) - 1 100 Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 1 100 nA Drain-source on-state resistance RDS(on) V GS=10 V, I D=50 A - 6.2 6.9 mΩ Values Rev. 1.2 page 2 2009-06-15

Parameter Symbol Conditions Unit min. typ. max. Dynamic characteristics2) Input capacitance C iss - 7800 8970 pF Output capacitance C oss - 1180 1770 Reverse transfer capacitance Crss - 1130 1700 Turn-on delay time t d(on) -3 0- n s Rise time t r -6 0- Turn-off delay time t d(off) -4 5- Fall time t f -7 3- Gate Charge Characteristics2) Gate to source charge Q gs -4 6 6 1 n C Gate to drain charge Q gd -2 8 4 3 Gate charge total Q g - 110 125 Gate plateau voltage V plateau - 5.9 - V Reverse Diode Diode continous forward current2) I S - - 50 A Diode pulse current2) I S,pulse - - 200 Diode forward voltage V SD V GS=0 V, I F=50 A, T j=25 °C 0.6 0.9 1.3 V Reverse recovery time2) t rr -4 5- n s Reverse recovery charge2) Q rr -6 6- n C T C=25 °C Values V GS=0 V, V DS=25 V, f =1 MHz V DD=27.5 V, V GS=10 V, I D=50 A, R G=7 Ω V DD=11 V, I D=50 A, V GS=0 to 10 V V R=27.5 V, I F=I S, di F/dt =100 A/µs 1) Current is limited by bondwire; with an R thJC = 1.1 K/W the chip is able to carry 104 A at 25°C. For detailed information see Application Note ANPS071E. 2) Defined by design. Not subject to production test. 3) Qualified at -5V and +20V. 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.2 page 3 2009-06-15

1 Power dissipation 2 Drain current

P tot = f(T C); V GS ≥ 6 V I D = f(T C); V GS ≥ 6 V 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0 Z thJC = f(t p) parameter: t p parameter: D =t p/T 1 µs 10 µs 100 µs 1 ms 100 1000 0.1 1 10 100 V DS [V] I D [A] single pulse 0.01 0.05 0.1 0.5 10010-110-210-310-410-510-610-7 101 100 10-1 10-2 10-3 t p [s] Z thJC [K/W] 100 120 140 160 0 50 100 150 200 T C [°C] P tot [W] 0 50 100 150 200 T C [°C] I D [A] Rev. 1.2 page 4 2009-06-15

5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C R DS(on) = f(I D); T j = 25 °C parameter: V GS parameter: V GS 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6 V R DS(on) = f(T j); I D = 50 A; V GS = 10 V parameter: T j -60 -20 20 60 100 140 180 T j [°C] R DS(on) [mΩ ] 5.5 V 6 V 6.5 V 7 V 7.5 V 8 V 10 V 100 125 150 175 200 02468 1 0 V DS [V] I D [A]

6 V 7 V 8 V

I D [A] R DS(on) [mΩ ] -55 °C 25 °C 175 °C 100 150 200 02468 1 0 V GS [V] I D [A] Rev. 1.2 page 5 2009-06-15

9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS C = f(V DS); V GS = 0 V; f = 1 MHz parameter: I D 11 Typical forward diode characteristicis 12 Typ. avalanche characteristics IF = f(VSD) I AV = f(t AV) parameter: T j parameter: Tj(start) 25°C 100°C 150°C 100 1 10 100 1000 t AV [µs] I AV [A] 25 °C175 °C 103 102 101 100 V SD [V] I F [A] 80µA 800µA 1.5 2.5 3.5 -60 -20 20 60 100 140 180 T j [°C] V GS(th) [V] Ciss Coss Crss 104 103 102 0 5 10 15 20 25 V DS [V] C [pF] Rev. 1.2 page 6 2009-06-15

13 Typical avalanche Energy 14 Drain-source breakdown voltage

E AS = f(T j) V BR(DSS) = f(T j); I D = 1 mA parameter: I D 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 50 A pulsed parameter: V DD V GS Q gate V gs(th) Q g(th) Q gs Q gd Q sw Q g -60 -20 20 60 100 140 180 T j [°C] V BR(DSS) [V]

11 V 44 V

Q gate [nC] V GS [V] 50 A 25 A 12.5 A 300 600 900 1200 1500 0 50 100 150 200 T j [°C] E AS [mJ] V plateau Rev. 1.2 page 7 2009-06-15

81726 Munich, Germany

© Infineon Technologies AG 2009 All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.2 page 8 2009-06-15

Revision History

Data Sheet version 1.1 Data Sheet version 1.1 Data Sheet version 1.1 Data Sheet version 1.1 Data Sheet version 1.2 Data Sheet version 1.2 Changes Implementation of avalanche current single pulse Correction of package name Update of package drawing Update of avalanche diagram 12 and 13 implementation of footnote 2 for Eas specification Correction of marking and update of disclaimer Date 07.11.2007 07.11.2007 07.11.2007 07.11.2007 15.06.2009 15.06.2009 Rev. 1.2 page 9 2009-06-15