IP4282CZ6 NEXPERIA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. use http://www.nexperia.com salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e -mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

  1. Product profile

1.1 General description

The IP4282CZ6 is designed to protect high-speed interfaces such as HDMI, DVI and DisplayPort interfaces. The device includes high-level ElectroStatic Discharge (ESD) protection diodes for the TMDS signal lines. All TMDS intra-pairs are protected by a special diode configuration offering a low line capacitance of only 0.7 pF . These diodes provide protection to downstream components from ESD voltages up to±8 kV contact according to IEC 61000-4-2, level 4.

1.2 Features

n ‘Pass-thru’ signal line routing n Pb-free, RoHS compliant and free of Halogen and Antimony (Dark Green compliant) n All TMDS lines with integrated rail-to-rail clamping diodes for downstream ESD protection of±8 kV according to IEC 61000-4-2, level 4 n Matched 0.5 mm trace spacing n Line capacitance of only 0.7 pF for each channel n 2-channel, 6-terminal UTLP n HDMI 1.3a compliant n DisplayPort compliant

1.3 Applications

The IP4282CZ6 is designed for HDMI receiver and transmitter port protection: n TVs, monitors n DVD recorders and players n Notebooks, main board graphics cards and ports n Set-top boxes and game consoles IP4282CZ6 ESD protection for high-speed interfaces Rev. 01 — 30 March 2009 Product data sheet

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Table 1. Pinning

1 TMDS_CH1 − negative channel 1 ESD protection

2 TMDS_CH1+ positive channel 1 ESD protection

3 GND ground

4 GND ground

Table 2. Ordering information Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 4. Characteristics

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. [1] This parameter is guaranteed by design. [2] Human Body Model according to JESD22-A-J114D. Table 4. Characteristics …continued

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 01 — 30 March 2009 4 of 9 NXP Semiconductors IP4282CZ6 ESD protection for high-speed interfaces 6. Application information The IP4282CZ6 is designed to provide high-level ESD protection for high-speed serial data buses such as HDMI, DVI, DisplayPort, USB2.0 and other LVDS data lines. A basic application diagram for the ESD protection of an HDMI interface is shown in Figure1, and a USB interface inFigure2. Fig 1. Application diagram of HDMI ESD protection using IP4282CZ6 001aaj777 TMDS_D2+ GND3 TMDS_GND TMDS_D1+ TMDS_GND IP4282CZ6 TMDS_D1 − TMDS_D2 − TMDS_CH1+ TMDS_CH1+ TMDS_CH1 − TMDS_CH1 − HDMI CONNECTOR GND IP4282CZ6 TMDS_D0+ GND TMDS_GND TMDS_CLK+ TMDS_GND IP4282CZ6 TMDS_CLK − TMDS_D0 − TMDS_CH1+ TMDS_CH1+ TMDS_CH1 − TMDS_CH1 − GND IP4282CZ6 CEC GND n.c. DDC_DAT GND +5 V IP4282CZ6 HOT PLUG DETECTION DDC_CLK TMDS_CH1+ TMDS_CH1+ TMDS_CH1 − TMDS_CH1 − GND IP4282CZ6

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 01 — 30 March 2009 5 of 9 NXP Semiconductors IP4282CZ6 ESD protection for high-speed interfaces Fig 2. Application diagram of USB ESD protection using IP4282CZ6 001aaj778 GND3 GND IP4282CZ6 TMDS_CH1+ TMDS_CH1 − D − VBUS USB CONNECTOR

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 01 — 30 March 2009 6 of 9 NXP Semiconductors IP4282CZ6 ESD protection for high-speed interfaces 7. Package outline Fig 3. Package outline SOT886 (XSON6) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT886 MO-252 SOT886 04-07-15 04-07-22 DIMENSIONS (mm are the original dimensions) XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm D E e A 1 b LL1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 1.5 1.4 0.35 0.27 A max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Table 5. Abbreviations Table 6. Revision history

IP4282CZ6_1 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 01 — 30 March 2009 8 of 9 NXP Semiconductors IP4282CZ6 ESD protection for high-speed interfaces 10. Legal information

10.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

10.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

10.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control —This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.

10.4 Licenses

10.5 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. Purchase of NXP ICs with HDMI technology Use of an NXP IC with HDMI technology in equipment that complies with the HDMI standard requires a license from HDMI Licensing LLC, 1060 E. Arques Avenue Suite 100, Sunnyvale CA 94085, USA, e-mail: admin@hdmi.org.

NXP Semiconductors IP4282CZ6 ESD protection for high-speed interfaces © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 30 March 2009 Document identifier: IP4282CZ6_1 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 12. Contents