IP1R18A-05

IP1R18A SEME-LAB | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.

5 AMP

TJ Operating Junction Temperature Range TSTG Storage Temperature Range TL Lead Temperature (Soldering, 10 sec) 35V Internally limited See Table Above –65°C to +150°C 300°C ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)

FEATURES

• 0.01%/V LINE REGULATION  0.5% LOAD REGULATION  1% OUTPUT TOLERANCE (–A VERSIONS)  AVAILABLE IN 5V, 12V AND 15V OPTIONS  COMPLETE SERIES OF PROTECTIONS:  CURRENT LIMITING  THERMAL SHUTDOWN  SOA CONTROL Pin 1 – VIN Pin 2 – VOUT Case – Ground K Package – TO–3 Pin 1 – VIN Pin 2 – Ground Pin 3 – VOUT Case – Ground V Package – TO–218 123 Order Information Part K–Pack V–Pack Temp. Number (TO–3) (TO–218) Range IP1R18Axx–zz ✔ -55 to +150°C IP1R18xx–zz ✔ ” IP3R18Azz–xx ✔✔ 0 to +125°C IP3R18zz–xx ✔✔ ” Note: xx = Voltage Code (05, 12, 15) eg. IP1R18AK–05 zz = Package Code (K, V) IP3R18V–12

Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. IP1R18A –05 IP1R18 –05 IP3R18A –05 IP3R18 –05 VO /G44 VO /G44 VI /G44 VO /G44 IO IQ /G44 IQ VD IPEAK ISC en R /G71 JC Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection Thermal Regulation Peak Output Current Short Circuit Current Output Noise Voltage Thermal Resistance Junction to Case I O = 5mA to 5A POUT /GA3 50W V IN = 8V to 20V TJ = Over Temp. Range1 VIN = 7.5V to 35V IO = 5mA 3 TJ = Over Temp. Range1 IO = 5mA to 5A 3 TJ = Over Temp. Range1 IO = 5mA T J = Over Temp. Range1 IO = 5mA to 5A TJ = Over Temp. Range1 IO = 5mA V IN = 7.5V to 35V TJ = Over Temp. Range1 IO = 5A /G44 VOUT = 100mV TJ = Over Temp. Range1 IO = 1A f = 120Hz TJ = Over Temp. Range1 tp = 20ms /G44 P = 50W VIN = 10V T J = Over Temp. Range1 VIN = 10V VIN = 35V f = 10Hz to 100kHz K Package V Package 4.85 5.15 4.75 5.25 63 0 12 60 10 50 20 100 2.5 3 60 80 0.002 0.02 81 2 1.0 1.5 1.0 1.5 4.95 5 5.05 4.85 5.15 31 5 63 0 52 5 10 50 2.5 3 60 80 0.002 0.01 81 2 1.0 1.5 1.0 1.5 V V mV mV mA mA V dB %/W A A /G6D V °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated) Notes 1) Applies over full temperature range:– TJ = –55 to +150°C for IP1R18A–05 / IP1R18–05 TJ = 0 to +125°C for IP3R18A–05 / IP3R18–05 All other specifications apply at TJ = 25°C unless otherwise stated. 2) Test conditions unless otherwise stated:– VIN = 10V , IOUT = 2.5A . Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W. 3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal regulation specification.

Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. IP1R18A –12 IP1R18 –12 IP3R18A –12 IP3R18 –12 VO /G44 VO /G44 VI /G44 VO /G44 IO IQ /G44 IQ VD IPEAK ISC en R /G71 JC Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection Thermal Regulation Peak Output Current Short Circuit Current Output Noise Voltage Thermal Resistance Junction to Case I O = 5mA to 5A POUT /GA3 50W V IN = 15V to 27V TJ = Over Temp. Range1 VIN = 14.5V to 35V IO = 5mA 3 TJ = Over Temp. Range1 IO = 5mA to 5A 3 TJ = Over Temp. Range1 IO = 5mA T J = Over Temp. Range1 IO = 5mA to 5A TJ = Over Temp. Range1 IO = 5mA V IN = 14.5V to 35V TJ = Over Temp. Range1 IO = 5A /G44 VOUT = 250mV TJ = Over Temp. Range1 IO = 1A f = 120Hz TJ = Over Temp. Range1 tp = 20ms /G44 P = 50W VIN = 17V T J = Over Temp. Range1 VIN = 17V VIN = 35V K Package V Package 11.64 12 12.36 11.40 12.60 10 60 20 120 20 120 40 240 2.5 3 52 72 0.002 0.02 81 2 1.0 1.5 1.0 1.5 11.88 12 12.12 11.64 12.36 53 0 10 60 10 60 20 120 2.5 3 52 72 0.002 0.01 81 2 1.0 1.5 1.0 1.5 V V mV mV mA mA V dB %/W A A /G6D V °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated) Notes 1) Applies over full temperature range:– TJ = –55 to +150°C for IP1R18A–12 / IP1R18–12 TJ = 0 to +125°C for IP3R18A–12 / IP3R18–12 All other specifications apply at TJ = 25°C unless otherwise stated. 2) Test conditions unless otherwise stated:– VIN = 17V , IOUT = 2.5A . Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W. 3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal regulation specification.

Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. IP1R18A –15 IP1R18 –15 IP3R18A –15 IP3R18 –15 VO /G44 VO /G44 VI /G44 VO /G44 IO IQ /G44 IQ VD IPEAK ISC en R /G71 JC Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection Thermal Regulation Peak Output Current Short Circuit Current Output Noise Voltage Thermal Resistance Junction to Case I O = 5mA to 5A POUT /GA3 50W V IN = 18V to 30V TJ = Over Temp. Range1 VIN = 17.5V to 35V IO = 5mA 3 TJ = Over Temp. Range1 IO = 5mA to 5A 3 TJ = Over Temp. Range1 IO = 5mA T J = Over Temp. Range1 IO = 5mA to 5A TJ = Over Temp. Range1 IO = 5mA V IN = 17.5V to 35V TJ = Over Temp. Range1 IO = 5A /G44 VOUT = 300mV TJ = Over Temp. Range1 IO = 1A f = 120Hz TJ = Over Temp. Range1 tp = 20ms /G44 P = 50W VIN = 20V T J = Over Temp. Range1 VIN = 20V VIN = 35V K Package V Package 14.55 15 15.45 14.25 15.75 16 80 32 160 32 160 64 320 2.5 3 50 70 0.002 0.02 81 2 3.5 1.0 1.5 1.0 1.5 14.85 15 15.15 14.55 15.45 84 0 16 80 16 80 32 160 2.5 3 50 70 0.002 0.01 81 2 3.5 1.0 1.5 1.0 1.5 V V mV mV mA mA V dB %/W A A /G6D V °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated) Notes 1) Applies over full temperature range:– TJ = –55 to +150°C for IP1R18A–15 / IP1R18–15 TJ = 0 to +125°C for IP3R18A–15 / IP3R18–15 All other specifications apply at TJ = 25°C unless otherwise stated. 2) Test conditions unless otherwise stated:– VIN = 20V , IOUT = 2.5A . Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W. 3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal regulation specification.