IP137MAHV-LCC4 SEME-LAB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

0.5 AMP

VI–O Input - Output Differential Voltage – Standard – HV Series IO Output Current PD Power Dissipation TJ Operating Junction Temperature Range TSTG Storage Temperature 40V 50V Internally limited Internally limited –55 to +150°C –65 to 150°C ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)

FEATURES

  • –1.2V TO 47V OUTPUT VOLTAGE RANGE
  • 0.5A OUTPUT CURRENT
  • 1% OUTPUT VOLTAGE TOLERANCE
  • 0.5% / A LOAD REGULATION
  • 0.01% / V LINE REGULATION
  • 0.02% / W THERMAL REGULATION
  • INTERNAL PROTECTION Internal current and power limiting coupled with true thermal limiting prevents device damage due to overloads or shorts, even if the regulator is not fastened to a heat sink. 1.39 (0.055) 1.15 (0.045) 0.76 (0.030) 0.51 (0.020) 1.39 (0.055) 1.02 (0.040) 15 161312 14 34567 9.14 (0.360) 1.07 (0.040) » 2.16 (0.085) 7.62 (0.300) 7.12 (0.280) 1.65 (0.065) 1.40 (0.055) 0.33 (0.013) 0.08 (0.003) 0.43 (0.017) 0.18 (0.007 Rad. Rad. Pins 4,5 – Adjust Pins 6,7,8,9,10,11,12,13 – VOUT Pins 15,16,17,18,1,2 – VIN

IP137MAHV IP137MHV , IP137M IP137MA 0.010 0.020 0.020 0.050 15 25 0.3 0.5 20 50 0.3 1 0.002 0.02 66 77 65 100 0.5 5 2.5 5 1.2 3 0.50 0.80 1.5 0.15 0.17 0.10 0.17 0.5 0.6 0.3 1 0.003 0.005 0.010 0.010 0.030 52 5 0.1 0.5 10 50 0.2 1 0.002 0.020 60 66 70 80 65 100 0.2 2 1.0 5 2.0 6 2.5 5 1.2 3 0.50 0.80 1.5 0.15 0.17 0.10 0.17 0.5 0.6 1.5 0.3 1 0.003 V REF Reference Voltage DVOUT Line Regulation 1 DVIN DVOUT Load Regulation 1 DIOUT Thermal Regulation Ripple Rejection IADJ Adjust Pin Current DIADJ Adjust Pin Current Change IMIN Minimum Load Current ICL Current Limit DVOUT Temperature DTEMP Stability DVOUT Long Term Stability DTIME en RMS Output Noise (% of V OUT ) R qJC Thermal Resistance Junction to Case V V %/V mV mV %/W dB dB mA mA mA A °C/W 1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. 2) Test Conditions unless otherwise stated: VIN – VOUT = 5V , IOUT = 0.1A , PMAX = 10W, IMAX = 0.5A VMAX = 40V for standard series , 50V for HV series. IOUT = 10mA IOUT = 10mA to IMAX VIN – VOUT = 3V to VMAX P £ PMAX TJ = -55 to 150°C VIN – VOUT = 3V to VMAX TJ = -55 to 150°C IOUT = 10mA to IMAX VOUT £ 5V VOUT ‡ 5V IOUT = 10mA to IMAX VOUT £ 5V TJ = -55 to 150°C V OUT ‡ 5V tp = 10ms T A = 25°C C ADJ = 0 VOUT = -10V C ADJ = 10mF f = 120Hz TJ = -55 to 150°C TJ = -55 to 150°C IOUT = 10mA to IMAX VIN – VOUT = 3V to 40V TJ = -55 to +150°C VIN – VOUT = 3V to 50V (HV SERIES) VIN – VOUT £ 40V TJ = -55 to 150°C VIN – VOUT £ 10V VIN – VOUT £ 15V VIN – VOUT = 40V TJ = -55 to 150°C VIN – VOUT = 50V (HV SERIES) TJ = -55 to 150°C TA = +125°C t = 1000 Hrs f = 10 Hz to 10 kHz T A = 25°C