IP120MH-05

IP120MA SEME-LAB | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Note 1. Although power dissipation is internally limited, these specifications are applicable for maximum power dissipation PMAX of 2W for the H–Package ,1.05W for the J–Package and 15W for the SG–Package. IP120MA SERIES IP120M SERIES IP79M00A SERIES IP79M00 SERIES Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Pin 1 – Ground Pin 2 – VOUT Case – VIN H Package – TO–39 Pin 1 – Ground Pin 2 – VIN Case – VOUT CERAMIC SURFACE MOUNT /G31/G33 /G32

8 Pin J Package

0.5 AMP

FEATURES

 OUTPUT CURRENT UP TO 0.5A  OUTPUT VOLTAGES OF -5, -12, -15V  0.01% / V LINE REGULATION  0.3% / A LOAD REGULATION  THERMAL OVERLOAD PROTECTION  SHORT CIRCUIT PROTECTION  OUTPUT TRANSISTOR SOA PROTECTION  1% VOLTAGE TOLERANCE ( –A VERSIONS) VI DC Input Voltage (for V O = -5, -12, -15V) PD Power Dissipation R /G71 JC Thermal Resistance Junction to Case – H Package – SMD Package R /G71 JA Thermal Resistance Junction to Ambient– H Package – J Package TJ Operating Junction Temperature Range Tstg Storage Temperature -35V Internally limited 20°C / W TBA °C / W 120°C / W 119°C / W –55 to 150°C –65 to 150°C

DESCRIPTION

The IP120MA and IP79M00A series of voltage regulators are fixed output regulators intended for local, on-card voltage regulation. These devices are available in -5, -12, and -15 volt options and are capable of delivering in excess of 500mA over temperature. The A suffix devices are fully specified at 0.5A, provide 0.01% / V line regulation, 0.3% / A load regulation, and ±1% output voltage tolerance at room temperature. Protection features include safe operating area, current limiting and thermal shutdown. Part H –Pack J –Pack SMD –Pack Temp. Number (TO –39) CERDIP SMD1 Range IP79MxxAzz ✔✔ ✔ -55 to +150°C IP79Mxxzz ✔✔ ✔ ” IP120MAzz–xx ✔✔ ” IP120Mzz–xx ✔✔ ” Order Information Note: xx = Voltage Code (05, 12, 15) eg. IP79M05J zz = Package Code (H, J) IP120MAH –12 ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated)

1) All characteristics are measured with a capacitor across the input of 0.22/G6D F and a capacitor across the output of 0.1/G6D F. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp /GA3 10ms, /G64/GA3 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25°C PMAX = 2W for H Package (TO–39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SMD1 Package (SMD1) IP120MA SERIES IP120M SERIES IP79M00A SERIES IP79M00 SERIES Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. VO Output Voltage /G44 VO Line Regulation /G44 VO Load Regulation IQ Quiescent Current /G44 IQ Quiescent Current Change VN Output Noise Voltage /G44 VIN Ripple Rejection /G44 VO Dropout Voltage Isc Short Circuit Current I pk Peak Output Current Average Temperature Coefficient of V O IP79M05A IP79M05 IP120MA –05 IP120M –05 IO = 100mA V IN = -10V IO = 5mA to 350mA PD /GA3 PMAX VIN = -7V to -25V TJ = -55 to 150°C VIN = -7V to -25V IO = 350mA V IN = -8V to -18V TJ = -55 to 150°C IO = 5mA to 500mA VIN = -10V T J = -55 to 150°C VIN = -10V I O = 350mA TJ = -55 to 150°C IO = 5mA to 500mA VIN = -10V T J = -55 to 150°C IO = 200mA V IN = -8V to -25V TJ = -55 to 150°C f = 10Hz to 100kHz IO = 300mA f = 120Hz IO = 100mA VIN = -8V to -18V TJ = -55 to 150°C IO = 350mA VIN = -35V VIN = -10V IO = 5mA -4.8 -5 -5.2 -4.75 -5.25 100 0.4 0.4 400 2.3 300 600 0.5 1.0 1.6 0.5 -4.95 -5 -5.05 -4.85 -5.15 31 0 31 0 55 0 0.1 0.4 0.1 0.4 40 400 65 80 65 80 1.1 2.3 300 600 0.5 1.0 1.4 0.5 2.0 V mV mV mA mA /G6D V dB V mA A mV

ELECTRICAL CHARACTERISTICS

1) All characteristics are measured with a capacitor across the input of 0.22/G6D F and a capacitor across the output of 0.1/G6D F. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp /GA3 10ms, /G64/GA3 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25°C PMAX = 2W for H Package (TO–39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SMD Package (SMD1) VO Output Voltage /G44 VO Line Regulation /G44 VO Load Regulation IQ Quiescent Current /G44 IQ Quiescent Current Change VN Output Noise Voltage /G44 VIN Ripple Rejection /G44 VO Dropout Voltage Isc Short Circuit Current I pk Peak Output Current Average Temperature Coefficient of V O IP79M12A IP79M12 IP120MA –12 IP120M –12 IO = 100mA V IN = -19V IO = 5mA to 350mA PD /GA3 PMAX VIN = -14.5V to -30V TJ = -55 to 150°C VIN = -14.5V to -30V IO = 350mA V IN = -15V to -25V TJ = -55 to 150°C IO = 5mA to 500mA VIN = -19V T J = -55 to 150°C VIN = -19V I O = 350mA TJ = -55 to 150°C IO = 5mA to 500mA VIN = -19V T J = -55 to 150°C IO = 200mA V IN = -14.5V to -30V TJ = -55 to 150°C f = 10Hz to 100kHz f = 120Hz I O = 300mA VIN = -15V to I O = 100mA -25V T J = -55 to 150°C IO = 350mA VIN = -35V VIN = -19V IO = 5mA -11.5 -12 -12.5 -11.4 -12.6 240 1.5 3 0.4 0.4 960 2.3 300 600 0.5 1.0 1.6 1.2 -11.88 -12 -12.12 -11.64 -12.36 41 8 41 8 10 60 1.5 3 0.1 0.4 0.1 0.4 96 960 58 72 58 72 1.1 2.3 300 600 0.5 1.0 1.4 1.2 4.8 V mV mV mA mA /G6D V dB V mA A mV Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.

Prelim. 9/00Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. 1) All characteristics are measured with a capacitor across the input of 0.22/G6D F and a capacitor across the output of 0.1/G6D F. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp /GA3 10ms, /G64/GA3 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25°C PMAX = 2W for H Package (TO–39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SMD Package (SMD1) VO Output Voltage /G44 VO Line Regulation /G44 VO Load Regulation IQ Quiescent Current /G44 IQ Quiescent Current Change VN Output Noise Voltage /G44 VIN Ripple Rejection /G44 VO Dropout Voltage Isc Short Circuit Current I pk Peak Output Current Average Temperature Coefficient of V O IP79M15A IP79M15 IP120MA –15 IP120M –15 IO = 100mA V IN = -23V IO = 5mA to 350mA PD /GA3 PMAX VIN = -17.5V to -30V TJ = -55 to 150°C VIN = -17.5V to -30V IO = 350mA V IN = -18V to -28V TJ = -55 to 150°C IO = 5mA to 500mA VIN = -23V T J = -55 to 150°C VIN = -23V I O = 350mA TJ = -55 to 150°C IO = 5mA to 500mA VIN = -23V T J = -55 to 150°C IO = 200mA V IN = -17.5V to -30V TJ = -55 to 150°C f = 10Hz to 100kHz f = 120Hz I O = 300mA VIN = -18.5V to I O = 100mA -28.5V T J = -55 to 150°C IO = 350mA VIN = -35V VIN = -23V IO = 5mA -14.4 -15 -15.6 -14.25 -15.75 240 1.5 3 0.4 0.4 1200 2.3 300 600 0.5 1.0 1.6 1.5 -14.85 -15 -15.15 -14.55 -15.45 42 2 42 2 12 75 1.5 3 0.1 0.4 0.1 0.4 120 1200 57 70 57 70 1.1 2.3 300 600 0.5 1.0 1.4 1.5 6.0 V mV mV mA mA /G6D V dB V mA A mV