IP117MH SEME-LAB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourage s customers to verify that datasheets are current before placing orders. Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8976 Issue 1 Page 1 of 5 IP117MH / LM117H IP117MAH IP117MHVH / LM117HVH IP117MAHVH ABSOLUTE MAXIMUM RATINGS (T C = 25°C unless otherwise stated) Standard 40V VI - V O Input – Output Voltage Differential HV Series 60V IO Output Current Internally Limited PD Power Dissipation Internally Limited TJ Operating Junction Temperature Range -55 to +150°C Tstg Storage Temperature Range -65 to +150°C THERMAL PROPERTIES Symbols Parameters Min. Typ. Max. Units RθJC Thermal Resistance, Junction To Case 15 °C/W

DESCRIPTION

The 117M Series regulators are adjustable 3 terminal voltage regulators capable of supplying in excess of 0.5A over an output voltage range of 1.25V to 40V (HV Series, 60V). The regulators are exceptionally easy to apply requiring only 2 external resistors to set the output voltage. Every effort has been made to make these devices easy to use and difficult to damage. Internal current limiting and power limiting coupled with true thermal limiting prevents damage due to overloads or shorts.

FEATURES

  • 1% Output Voltage Tolerance Guaranteed (A Version)
  • 0.3% Load Regulation Guaranteed
  • 0.01% Line Regulation Guaranteed
  • 0.5A Output Current Guaranteed
  • Internal Thermal Overload Protection
  • Output Short Circuit Protected
  • Hermetic Metal TO39 (TO-205AD) Package
  • Screening Options Available

APPLICATIONS

  • Adjustable Power Supplies
  • System Power Supplies
  • Precision Voltage / Current Regulators

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8976 Issue 1 Page 2 of 5 ELECTRICAL CHARACTERISTICS (1)(3) (T C = 25°C unless otherwise stated) LM117, IP117M, LM117HV, IP117MHV Symbols Parameters Test Conditions Min. Typ Max. Units IOUT = 10mA 1.200 1.250 1.300 VREF Reference Voltage 10mA ≤ I OUT ≤ IMAX , P ≤ P MAX , 3V ≤ (V IN -VOUT ) ≤ V MAX • 1.200 1.250 1.300 V 0.010 0.020 IN OUT V V Δ Δ Line Regulation (2) 3V ≤ (V IN -VOUT ) ≤ V MAX , IOUT = 10mA • 0.020 0.050 %/V VOUT ≤ 5V 5 15 mV VOUT ≥ 5V 0.1 0.3 % VOUT ≤ 5V • 20 50 mV OUTI OUTV Δ Δ Load Regulation (2)(3) 10mA ≤ I OUT ≤ IMAX VOUT ≥ 5V • 0.3 1.0 % Thermal Regulation VIN = 5.25V, IOUT = 0.5A, PD = 2W, TA = 25°C, 20ms Pulse 0.030 0.070 %/W VOUT = 10V C ADJ = 0 65 Ripple Rejection f = 120Hz CADJ = 10µF • 66 80 dB IADJ Adjust Pin Current • 50 100 ∆IADJ Adjust Pin Current Change 10mA ≤ I OUT ≤ IMAX , 2.5V ≤ (V IN -VOUT ) ≤ V MAX • 0.2 5 µA (V IN - V OUT ) = 40V • 3.5 5 IMIN Minimum Load Current (V IN - V OUT ) = 60V (( ((HV Series) HV Series) HV Series) HV Series) • 3.5 7 mA (V IN - V OUT ) ≤ 15V • 0.5 0.8 (V IN - V OUT ) = 40V • 0.15 0.2 ICL Current Limit (V IN - V OUT ) = 60V (HV Series) (HV Series) (HV Series) (HV Series) • 0.3 A TEMP OUTV Δ Δ Temperature Stability • 1.0 TIME OUTV Δ Δ Long Term Stability TA = 125°C, 1000Hrs 0.3 1.0 en RMS Output Noise (% of V OUT ) TA = 25°C, 10Hz ≤ f ≤ 10KHz 0.001 Notes Notes Notes Notes The ● denotes the specifications which apply over the full operating temperature range. (1) Test conditions unless otherwise stated: V IN - V OUT = 5V, I OUT = 0.1A, P MAX = 2W, I MAX = 0.5A (2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at /8” below the base of the package on the output pin. (3) VMAX = 40V for LM117, IP117M, IP117MA VMAX = 60V for LM117HV, IP117MHV, IP117MAHV

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8976 Issue 1 Page 3 of 5 ELECTRICAL CHARACTERISTICS (1)(3) (T C = 25°C unless otherwise stated) IP117MA, IP117MAHV Symbols Parameters Test Conditions Min. Typ Max. Units IOUT = 10mA 1.238 1.250 1.262 VREF Reference Voltage 10mA ≤ I OUT ≤ IMAX , P ≤ P MAX , 3V ≤ (V IN -VOUT ) ≤ V MAX ● 1.220 1.250 1.270 V 0.005 0.010 IN OUT V V Δ Δ Line Regulation (2) 3V ≤ (V IN -VOUT ) ≤ V MAX , IOUT = 10mA ● 0.010 0.020 %/V VOUT ≤ 5V 5 15 mV VOUT ≥ 5V 0.1 0.3 % VOUT ≤ 5V ● 15 50 mV OUTI OUTV Δ Δ Load Regulation (2)(3) 10mA ≤ I OUT ≤ IMAX VOUT ≥ 5V ● 0.3 1.0 % Thermal Regulation VIN = 5.25V, IOUT = 0.5A, PD = 2W, TA = 25°C, 20ms Pulse 0.002 0.020 %/W VOUT = 10V C ADJ = 0 65 Ripple Rejection f = 120Hz CADJ = 10µF ● 66 80 dB IADJ Adjust Pin Current ● 50 100 ∆IADJ Adjust Pin Current Change 10mA ≤ I OUT ≤ IMAX , 2.5V ≤ (V IN -VOUT ) ≤ V MAX ● 0.2 5 µA (V IN - V OUT ) = 40V ● 3.5 5 IMIN Minimum Load Current (V IN - V OUT ) = 60V (HV Series) (HV Series) (HV Series) (HV Series) ● 3.5 7 mA (V IN - V OUT ) ≤ 15V ● 0.5 0.8 (V IN - V OUT ) = 40V ● 0.15 0.2 ICL Current Limit (V IN - V OUT ) = 60V (HV Series) (HV Series) (HV Series) (HV Series) ● 0.3 A TEMP OUTV Δ Δ Temperature Stability ● 1.0 2 TIME OUTV Δ Δ Long Term Stability TA = 125°C, 1000Hrs 0.3 1.0 en RMS Output Noise (% of V OUT ) TA = 25°C, 10Hz ≤ f ≤ 10KHz 0.001 Notes Notes Notes Notes The ● denotes the specifications which apply over the full operating temperature range. (1) Test conditions unless otherwise stated: V IN - V OUT = 5V, I OUT = 0.1A, P MAX = 2W, I MAX = 0.5A (2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at /8” below the base of the package on the output pin. (3) VMAX = 40V for LM117, IP117M, IP117MA VMAX = 60V for LM117HV, IP117MHV, IP117MAHV

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8976 Issue 1 Page 4 of 5 APPLICATIONS INFORMATION OE Vpp READ 0V 5V WRITE BYTE 5V 21V CHIP ERASE 12V 21V ADJ IP317A RETURN 121 Ω 383 Ω LM301A 25 Ω 5µF 1k Ω 25 Ω VIN (Max Drop 300mV) OUTPUTVIN VIN VO U T R P R L RETURN 1kΩ 1kΩ 383 Ω 121 ΩA D J IP 317 A VIN VO U T 2N 3904TT L 1µF VIN VO U T 249 Ω ADJ IP317A VIN VO U T 1µF +24V To 750 Ω 3.24k Ω VPP 39k Ω 18k Ω 100k Ω To OE READ WRITE BYTE ERASE CHIP ERASE All gates 7406. 121 Ω ADJ IP317A VIN VO U T 1µF VIN 10 µF 383 Ω 20k Ω 10k Ω 50 Ω 2N3906 243 Ω ADJ IP317A VIN VO U TVIN 1N4001 50k Ω 12V THERMALLY COUPLE

2816 EEPROM Supply Programmer for

5V Regulator with Shut Down C1 improves ripple rejection Xc should be small compared to R2 Improving Ripple Rejection Temperature Compensated Lead-Acid Battery Charger IP117 IP117 IP117 IP117 IP117

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8976 Issue 1 Page 5 of 5 MECHANICAL DATA Dimensions in mm (inches) 0.89 (0.035)max. 12.70 (0.500) min. 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 45° 6.10 (0.240) 6.60 (0.260) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 0.74 (0.029) 1.14 (0.045) TO39 (TO-205AD) H Package Underside View Pin 1 = V IN Pin 2 = ADJ Pin 3 = V OUT